(not available for the ® EPSON Stylus Photo) For all other printing applications, use the standard EPSON driver that came with your printer. This card gives you the basic steps for setting up and using StylusRIP. For more detailed information, see your EPSON...
Page 2
Installing StylusRIP Before you install the StylusRIP software, make sure you set up your printer correctly and install the standard EPSON driver, following the instructions that came with the printer. Try printing from WordPad or Notepad to make sure everything works correctly.
Page 3
Printing With StylusRIP Once StylusRIP is installed on your computer and your printer is updated, you can print a test file to make sure everything is working correctly. Printing from StylusRIP is a two-step process: first you print to a PostScript file from your application, then StylusRIP processes your file and sends it to your printer.
Page 4
EPSON and EPSON Stylus are registered trademarks and EPSON StylusRIP is a trademark of SEIKO EPSON CORPORATION. PostScript is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions. PANTONE is a registered trademark of Pantone, Inc.