Program Initialization; Initializing All Programs; Initializing A Single Program - Brother HE-800A User Manual
Electronic lockstitch button holer
Hide thumbs
Also See for HE-800A:
- Service manual (162 pages) ,
- Manual del instrucción (122 pages) ,
- Instruction manual (118 pages)
Table of Contents
Advertisement
. PROGRAM INITIALIZATION
- . Initializing all programs
1. While pressing the RESET key (1), turn on the power switch.
* While initializing all programs, all LEDs on the operation panel will illuminate and the buzzer will sound
continuously for 8 seconds.
2. Once all programs have been initialized, "- -" will appear in the program number LED (2), and "- - - -" will appear in
the parameter display LED (3).
Settings which are initialized
Parameters
Memory switches
Production counter and lower thread counter
* If any cycle programs have been set, they will also be cleared.
3. Set the feed mechanism to the home position. (Refer to "5-2. Home position detection (preparation)".)
- . Initializing a single program
1. Select the number of the program to be initialized, and then turn off the power.
2. While pressing the CUTTER ON key (4), turn on the power switch.
* The number of the program that will be initialized will appear in the program number LED (2), and then all other
LEDs will illuminate and the buzzer will sound four times.
3. When all parameters of the selected program have been initialized, "- -" will appear in the program number LED (2),
and "- - - -" will appear in the parameter display LED (3).
Settings which are initialized
Parameters
4. Set the feed mechanism to the home position. (Refer to "5-2. Home position detection (preparation)".)
HE-800A
12. PROGRAM INITIALIZATION
3992Q
80
Hide quick links:
Advertisement
Table of Contents
