Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZDT6764
Summary of Contents for Zanussi ZDT6764
- Page 1 GESCHIRRSPÜLER DISHWASHER ZDT 6764 Bedienungsanleitung Instruction book...
-
Page 2: Table Of Contents
Contents Safety instructions Installation instructions Building-in Disposal Levelling Fixing to adjacent units Economical and ecological dishwashing Water supply connections Description of the appliance Water inlet hose with safety valve Water outlet hose connection The control panel Electrical connection Prior to using for the first time Hints for test centres Setting the water softener Filling with salt... -
Page 3: Safety Instructions
Safety instructions It is most important that this instruction book should be Under no circumstances should you attempt to repair the retained with the appliance for future reference. Should machine yourself. Repairs carried out by inexperienced the appliance be sold or transferred to another owner, or persons may cause injury or serious malfunctioning. -
Page 4: Description Of The Appliance
Description of the appliance Upper basket stop Water hardness switch Salt container Detergent dispenser (type A / type B) Control panel Rating plate Rinse aid dispenser (type A / type B) Filters Lower spray arm 10. Upper spray arm 11. Upper basket IN143 The control panel Function push buttons:... -
Page 5: Prior To Using For The First Time
Audible signals 3. Press the function push button 3, the indicator lights of function push buttons 1 and 2 turn off while the indicator Audible signals have been introduced to help indicate which light of the push button 3 goes on flashing, the digital operations the dishwasher is performing: display indicates the current setting. -
Page 6: Filling With Salt
Setting electronically Filling with salt (The dishwasher must be switched off) Special salt can be added in one of two ways: The dishwasher is factory set at level 5. If it’s necessary to set If you are using dishwasher detergent that already contains a new level, proceed as follows. -
Page 7: Rinse Aid
Rinse aid Filling with rinse aid (Rinse aid dispenser type B) Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The 1. Open the container by turning the lid (A) anticlockwise. dispenser, which is positioned inside the door, holds about 110 2. -
Page 8: In Daily Use
Deactivation/activation of the inflow of 3. Press the function push button 2, the indicator lights of function push buttons 1 and 3 turn off while the indicator rinse aid light of the push button 2 goes on flashing, the digital (The dishwasher must be switched off) display indicates the current setting. -
Page 9: The Lower Basket
Open the door and slide out the baskets to load the dishes. For best results we recommend you to use the cutlery grids provided (if the The lower basket size and dimensions of the cutlery allow it). The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. -
Page 10: Adjusting The Height Of The Upper Basket
Adjusting the height of the upper basket Use of detergent If washing very large plates you can load them in the lower Only use detergents specifically designed for use in basket after moving the upper basket to the higher position. dishwashers. -
Page 11: Concentrated Detergent
Use of "3 in 1" combi detergent tablets General advice These products are tablets with combined detergent/rinse-aid and salt functions. 1. Before using these products you should first check that the water hardness in your supply is compatible with the use of these products as per the detergent manufacturers (on the product packaging). -
Page 12: Washing Programmes
Washing programmes Programme Degree of soil Cycle (3) Consumption values description Programme duration Energy Water type of load (in minutes) consumption consumption (in kWh) (in litres) Any. 1 cold rinse (to avoid Partial load (to be food scraps from sticking Rinse and Hold together) completed later in the day). -
Page 13: Starting A Washing Programme
Starting a washing programme In this fully integrated appliance the controls are located on the To cancel a washing programme in top of the door. When selecting a programme, the door needs progress to be open. Open the dishwasher door. Press simultaneously the function push buttons 2 and 3 for about 2 seconds, the indicator lights of the programme 1. -
Page 14: End Of The Washing Programme
7. End of the washing programme The dishwasher will automatically stop and 3 intermittent audible signals of about 15 seconds each, alternated one from another with a pause of 3 minutes, inform you of the end of the washing programme. Hot steam may escape from the appliance when opening the door immediately after the end of the programme, therefore, open the door carefully. -
Page 15: Maintenance And Cleaning
Maintenance and cleaning Clean the external surfaces of the machine and control panel To ensure a correct with a damp soft cloth. If necessary use only neutral working of the dishwasher, detergents. Never use abrasive products, scouring pads or NEVER try to remove the solvent (acetone, trichloroethylene etc..). -
Page 16: What To Do, When
What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer..a flashing fault code appears The intervention of an alarm is indicated by a combination of flashing indicator lights, audible signals and a visible fault code in the digital display, as indicated in the following chart. -
Page 17: Service And Spare Parts
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. -
Page 18: Installation Instructions
Installation instructions Any electrical and/or plumbing work required to install Do not use, for connection, old hoses which have been this appliance should be carried out by a qualified used in another appliance. electrician and/or plumber or competent person. If the machine is connected to new pipes or pipes which have Remove all packaging before positioning the machine. -
Page 19: Water Outlet Hose Connection
Water outlet hose connection Electrical connection The end of the drain hose can be connected in the following Information concerning the electrical connection is given on the ways: rating plate on the edge of the dishwasher’s door on the right. 1. -
Page 20: Hints For Test Centres
Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes"... - Page 21 From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.