Table of Contents
Advertisement
Maintenance
First, remove the mains plug from the socket outlet.
Display panel, Cabinet, Pedestal
Regular care:
Gently wipe the surface of the display panel,
cabinet, or pedestal by using a soft cloth to clean the
dirt or fingerprints.
Caution
●
Do not use a hard cloth or rub the surface too hard, otherwise this may cause scratches on the surface.
●
Take care not to subject the TV's surfaces to water or detergent. Liquid inside the TV could lead to product failure.
●
Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may
degrade surface quality or cause peeling of the paint.
●
The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the
surface with your fingernail or other hard objects.
●
Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may
degrade surface quality.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard this product, please contact
your local authorities or dealer and ask for the correct method of disposal.
Customer's Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of
your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Web Site: http://panasonic.net
© Panasonic Corporation 2012
For stubborn dirt:
First clean the dust on the surface. Dampen a soft cloth with
clean water or diluted neutral detergent (1 part detergent to 100
parts water). Wring the cloth and wipe the surface. Finally, wipe
away all the moisture.
Serial Number
M0312-0
Printed in Thailand
Advertisement
Table of Contents
Related Manuals for Panasonic Viera VT50A series
Summary of Contents for Panasonic Viera VT50A series
- Page 1 Warranty Service purposes. Model Number Serial Number M0312-0 Web Site: http://panasonic.net © Panasonic Corporation 2012 Printed in Thailand...
- Page 2 New Zealand New Zealand Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only.
- Page 3 Bluetooth SIG, Inc. and any use ® of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
-
Page 4: Table Of Contents
The recording and playback of content on this or any other device may require permission from the owner of the Quick Start Guide copyright or other such rights in that content. Panasonic has no authority to and does not grant you that permission and Accessories / Options ···········································6 explicitly disclaims any right, ability or intention to obtain such permission on your behalf. -
Page 5: Safety Precautions
Using an unapproved pedestal or other fixtures may or other open flames make the TV unstable, risking injury. Be sure to ask your local Panasonic dealer to perform setup. away from this product ● Use approved pedestals (p. 8) / wall-hanging brackets (p. -
Page 6: Display Panel
Important Installation Notices Install the TV on a stable surface Allow sufficient space around the TV for If a television is not positioned in a sufficiently stable radiated heat location, it can be potentially hazardous due to falling. ● Minimum distance When using the Many injuries, particularly to children, can be avoided by pedestal, keep the... -
Page 7: Accessories / Options
When noises occur due to the static electricity, etc., the TV might stop operating for the protection of the devices. In this case, turn the TV off with Mains power On / Off switch, then turn it on again. ● Additional information for built-in wireless LAN and access point may be on the following website. http://panasonic.jp/support/global/cs/tv/ ■ Bluetooth wireless technology ®... - Page 8 Optional accessories Please contact your local Panasonic dealer to purchase the recommended optional accessories. For additional details, please read the manual of the optional accessories. 3D Eyewear set (Rechargeable type) ● TY-ER3D4MW ● If you need additional 3D Eyewear, please purchase this optional accessory.
- Page 9 Do not use the pedestal if it becomes warped or physically damaged. ● If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic dealer immediately. During set-up, make sure that all screws are securely tightened.
- Page 10 Assembly screw Bracket Cover Base ● TBL5ZA3254 ● TXFBL5Z0091 ● TBL5ZX0313 (5) (50” class) (50” class) (50” class) (50” class) (1) (55” / 60” / 65” class) ● ● TBL5ZA3200 TBL5ZX0328 ● TXFBL5Z0056 (black) (55” / 60” / 65” class) (55”...
- Page 11 ■ Securing the TV Use the assembly screws (50” class) or (55” / 60” / 65” class) to fasten securely. ● Tighten the four assembly screws loosely at first, then tighten them firmly to fix securely. ● Carry out the work on a horizontal and level surface. Arrow mark (50”...
-
Page 12: Identifying Controls
Identifying Controls Remote Control INTERNET ([VIERA Connect]) (p. 20, 78) ● Displays VIERA Connect home screen. ● Confirms selections and choices. ● Press after selecting channel positions to quickly change channel. ● Displays the Channel List. [Option Menu] (p. 23) ●... - Page 13 VIERA Touch Pad Controller This touch pad controller is designed for the convenient operations, especially, on VIERA Connect or internet contents. You can operate the TV intuitively with this controller. ● The touch pad controller can be used by registering to this TV with Bluetooth wireless technology. Setup screen to register will appear in “Auto Tuning”...
- Page 14 Indicator / Control panel Remote control signal receiver ● Do not place any objects between the TV remote control signal receiver and remote control. C.A.T.S. (Contrast Automatic Tracking System) sensor ● Senses brightness to adjust picture quality when [Eco Mode] in the Picture Menu is set to [On]. (p.
-
Page 15: Basic Connection
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first. There are some restrictions on placement for viewing 3D images. -
Page 16: Av Devices
Note ● Keep RF (antenna) cable away from the mains lead to avoid and minimise mains interference pickup. ● Do not place the RF cable under the TV. To obtain optimum quality picture and sound, an aerial, the correct cable (75 Ω coaxial), and the correct terminating ●... - Page 17 Network To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network environment. ● If you do not have any broadband network services, please consult your retailer for assistance. ● Prepare the internet environment for wired connection or wireless connection. ●...
-
Page 18: Auto Tuning
Auto Tuning Search and store TV channels automatically. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 14 - 16) and settings (if necessary) of the connected equipment before starting Auto Tuning. - Page 19 ■ [Wired] 1. Select [Auto] Connection Test : succeeded Check network cable connection. Acquire IP Address The test is successful Check acquired IP address. Auto Manual Check for devices using same IP address. and the TV is Check gateway connection. connected to the Check server connection.
- Page 20 [WPS(Push button)] 1. Press the WPS button on the access point until the light flashes 2. Connect the TV with the access point WPS(Push button) 1) Please press the ‘WPS’ button on the wireless access point until its light flashes. 2) When the light is flashing select ‘Connect’...
-
Page 21: Using "Viera Connect
VIERA Connect is a gateway to the internet services unique to Panasonic. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as videos, games, communication tools, etc. from VIERA Connect home screen. -
Page 22: Watching
Watching TV Turn power on ● Mains power On / Off switch should be on. (p. 13) ■ VIERA Connect introduction banner appears Every time you turn on the TV, this banner appears at the bottom of the screen. You can access to VIERA Connect easily and enjoy the various contents. -
Page 23: Other Useful Functions
Other useful functions Display Information banner Display Information banner ● Also appears when changing a channel. Example: Digital TV 8:35 pm Coronation Street All Digital Channels 8:00 pm - 8:55 pm BBC ONE WALES Rating : PG Channel position and name Programme Start / Finish time (Digital TV) Channel number, etc. -
Page 24: Off Timer
Display the selectable settings for the current status Confirm or change the current status instantly ● To change select select / change access store [Dual Audio] (Digital TV) [Audio Description] (Digital TV) Selects stereo / monaural (if available) Sets to [Auto] if the programme has Audio Description service, then you will hear an additional audio track to [Subtitle Language] (Digital TV) describe events on screen... -
Page 25: Last View
[16:9] [4:3 Full] Directly displays the image at 16:9 Displays a 4:3 image enlarged without distortion (anamorphic). horizontally to fit the screen. ● For Digital TV or HD signal [14:9] [Zoom1] Displays the image at the standard Displays a 16:9 letterbox or 4:3 image 14:9 without distortion. -
Page 26: Using Tv Guide
Using TV Guide TV Guide - Electronic Programme Guide (EPG) provides an on-screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters). ● Digital TV and Analogue TV channels are displayed on the same TV Guide screen. [D] means Digital TV channel and [A] means Analogue TV channel. - Page 27 ■ ■ To view a channel list of the selected type To view a channel list of the selected category (Digital TV) (Category list) select category (Type list) select type Favourites All Channels view Prog.Type All Types view All Channels All Digital Channels All Types Only Analogue channels are listed...
-
Page 28: Using The Freeview Guide (Digital Tv)
Using the Freeview Guide (Digital TV) Using the Freeview Guide enables you to select a programme easily, view programme information, etc. The Freeview Guide - Electronic Programme Guide (EPG) provides an on screen listing of the programmes currently broadcast and the future broadcasts over the next seven days (depending on the broadcasters). View the Freeview Guide Each time pressed, the screen will be switched between the Freeview Guide Listing and What’s on Now / Next. -
Page 29: Viewing Teletext
Viewing Teletext Teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters. What is FASTEXT mode? In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriate coloured button. -
Page 30: Store Frequently Viewed Pages
FULL / TOP / BOTTOM (TOP) (BOTTOM) Normal (FULL) (Expand the BOTTOM half) (Expand the TOP half) View in multi window Watch TV and Teletext in two windows at once Select Picture and text on or off (Press twice) ● Operations can be made only in teletext screen. -
Page 31: Watching External Inputs
Watching External Inputs Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input. ● To connect the equipment (p. 14 - 16, 95 - 97) The remote control is capable of operating the contents or external equipment. (p. -
Page 32: Operating Contents Or The Equipment With The Tv Remote Control
Pause / Resume Record Start recording How to change the code Each type of the Panasonic equipment has its own remote control code. Change the code according to the equipment you want to operate. Press and hold during the following operations... -
Page 33: Viewing 3D Images
Viewing 3D images You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear (supplied). “Standard accessories” (p. 6) This TV supports [Frame Sequential] ∗ , [Side by Side] ∗ and [Top and Bottom] ∗ 3D formats. - Page 34 ● Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 3D Eyewear ● Use the supplied 3D Eyewear or Panasonic 3D Eyewear that has this logo and supports Bluetooth wireless technology. ® “Full HD 3D Glasses™” logo indicates products that are compatible with the active shutter 3D glasses technology standards licensed by the Full HD 3D Glasses Initiative.
-
Page 35: Part Names And Functions
Part names and functions Power switch ON / OFF ● Slide the tab to the “ON” / “OFF” position to switch the power On / Off. MODE ● Slide the tab to the “MODE” position to change the mode between 3D and 2D (view a 3D image in 2D). ●... -
Page 36: Replacing The Battery
Registration again When connection with registered TV fails, or when using with another TV, re-register the 3D Eyewear. Turn the TV on Within 50 cm from the TV, hold the power switch on the “MODE” position for more than 2 seconds ●... -
Page 37: View The 3D Images
3D-supported broadcast ● Please consult the suppliers of contents or programmes for availability of this service. ■ 3D photos and 3D videos taken by 3D-compatible Panasonic products ● Available in Media Player (p. 66) and Network services (p. 84) ■... - Page 38 ■ To change 3D format manually When the image is not changed properly using [3D], [2D] or [2D 3D] mode, use this manual setting. During the above operation Select the mode select 3D Mode Selection (Manual) Original Frame Sequential - 3D Frame Sequential - 2D Side by Side - 3D Side by Side - 2D...
- Page 39 3D Settings If the 3D images are not displayed correctly or seem unusual, adjust and setup the 3D settings. Display the menu Select [Picture] select Picture access Select [3D Settings] select P-NR access 3D Settings Access Screen Display Advanced Settings Reset Picture Defaults Reset Select one of the following functions and set...
-
Page 40: How To Use Viera Tools
How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. Display icons of the feature Select a feature select access VIERA Link ■ To return to TV ■ Follow the operations of each feature [Music] ∗... -
Page 41: How To Use Menu Functions
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. Display the menu ● Displays the functions that can be set (varies according to the input signal). Select the menu Example: [Picture Menu] select Main Menu access... -
Page 42: Menu List
Menu list Menu Item Adjustments / Configurations (alternatives) Selects your favourite picture mode for each input [Dynamic] / [Normal] / [Cinema] / [THX Cinema] / [THX Bright Room] / [Game] / [Professional1] / [Professional2] [Dynamic]: Improves contrast and sharpness for viewing in a bright room. [Normal]: Normal use for viewing in a normal lighting condition. - Page 43 Menu Item Adjustments / Configurations (alternatives) Automatic Brightness Control function Eco Mode Adjusts picture settings automatically depending on ambient lighting conditions [Off] / [On] Picture Noise Reduction Reduces unwanted picture noise and flicker noise in the contoured parts of a P-NR picture [Off] / [Min] / [Mid] / [Max] / [Auto] ●...
- Page 44 Menu Item Adjustments / Configurations (alternatives) Selects the screen area displaying the image [Off] / [On] [On]: Enlarges the image to hide the edge of the image. [Off]: Displays the image in the original size. 16:9 Overscan ● Set to [On] if noise is generated on the edge of the screen. ●...
- Page 45 Menu Item Adjustments / Configurations (alternatives) Balance Adjusts volume level of right and left speakers Headphone Volume Adjusts the volume of the headphones Surround sound settings [Off] / [V-Audio] / [V-Audio Surround] / [V-Audio ProSurround] [V-Audio]: Provides a dynamic enhancer of width to simulate improved spatial effects. [V-Audio Surround]: Surround Provides a dynamic enhancer of width and depth to simulate improved spatial...
- Page 46 Sets to control the TV with the devices connected to the network (p. 80) Software Update Checks for available software updates from the Panasonic website Selects whether to give a notification message when new software is found via New Software Message...
- Page 47 Menu Item Adjustments / Configurations (alternatives) Timer Programming Sets a timer to record or remind forthcoming programmes (p. 53) ● For Digital TV Sets the duration of time until the TV automatically goes into Standby mode Off Timer [Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 23) Sets the duration of time that the TV will remain on when no operation is performed [Off] / [2] / [4] (hours) ●...
- Page 48 Menu Item Adjustments / Configurations (alternatives) Teletext This item is not used for this model. Teletext Teletext display mode [FASTEXT] / [List] (p. 28) Preferred Subtitles Selects the preferred language for Digital TV subtitles (depending on the broadcaster) Accesses the input labels list to select the label of each input mode or set to skip unconnected one for easier identification and selection in [Input Selection] (p.
- Page 49 Menu Item Adjustments / Configurations (alternatives) DivX® VOD Displays DivX VOD registration code (p. 101) Enables the advanced picture settings [Off] / [On] ● Set to [On] to display the advanced items in the Picture Menu - [Advanced Settings], [Lock Settings] and [Copy Adjustment]. [Copy Adjustment] will be Advance(isfccc) displayed when [Viewing Mode] is set to [Professional1] or [Professional2].
-
Page 50: Tuning And Editing Channels
Tuning and Editing Channels You can retune channels or make your favourite channel lists, skip unwanted channels, etc. Select the mode (p. 21) Display the menu and select [Setup] select Setup access Select [Digital TV Tuning Menu] or [Analogue TV Tuning Menu] select access Digital TV Tuning Menu... - Page 51 ■ To edit Favourites list While the cursor is in the Favourites field to edit ● To move the channel ● To delete the channel Select the new position Store ● To delete all channels ● To name the Favourites Set characters (maximum 10 characters) Store select...
- Page 52 Set all channels automatically [Auto Tuning] Automatically retune all channels received in the area. Start Auto Tuning Settings are made automatically Example: Digital TV Example: Digital TV Digital TV Auto Tuning Digital TV Auto Tuning Scan CH 6 All digital TV tuning data will be erased This will take about 3 minutes.
- Page 53 Update Digital TV channel automatically [Update Channel List] (Digital TV) You can add new channels, delete removed channels, update channel name and position automatically to the channel list. ● The channel list is updated while keeping your settings in [Favourites Edit], Digital TV Update Channel List CH 6 Scan...
-
Page 54: Timer Programming
Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you want to remind watching or record to the USB HDD or the SD Card. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode. -
Page 55: Set Timer Programming Event Details
Set timer programming event details Start making the settings Select the function ([USB HDD Rec.], [SD Card Rec.] or [Reminder]) [USB HDD Rec.] / [SD Card Rec.]: Records the programme to the USB HDD or the SD Card. When the start time comes, the channel will be switched automatically and the video and audio signals will be output. - Page 56 ■ To edit a timer programming event Select the event ● To change a timer programming event ● To cancel a timer programming event temporarily Each time pressed: • Timer off: cancel Timer on: stop cancelling Correct as necessary (p. 54) ●...
-
Page 57: Child Lock
Child Lock You can lock specific channels / AV input terminals and control who watches them. When the locked channel / input is selected, a message appears. Enter the PIN number to watch. Display the menu and select [Setup] select Setup access Select [Child Lock]... -
Page 58: Shipping Condition
Shipping Condition Resets the TV to its original condition, i.e. no channels tuned in. All settings other than [USB HDD Setup] are reset (channels, picture, sound settings, etc.). ● To retune TV channels only, e.g. after moving house [Auto Tuning] in “Tuning and Editing Channels” (p. 51, 52) Display the menu and select [Setup] select Setup... -
Page 59: Updating The Tv Software
Updating the TV Software A new version of software may be released for download to enhance the performance or operations of the TV. If there is an update available, a notification message is displayed when the channel has the update information. ●... -
Page 60: Displaying Pc Screen On Tv
Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected. ● To connect PC (p. 96) Select the external input Select [PC] select Input Selection... -
Page 61: Advanced Picture Settings
Advanced Picture Settings You can adjust and setup the detailed picture settings for each Viewing Mode (except THX modes). ● To use this function completely, set [Advance(isfccc)] to [On] in the Setup Menu. (p. 48) ● For PC input mode, some functions are available without setting [Advance(isfccc)]. Display the menu and select [Picture] select Picture... - Page 62 Menu Item Adjustments / Configurations (alternatives) R-Hue, G-Hue, B-Hue Adjusts the picture hue of red / green / blue area R-Saturation, G-Saturation, Adjusts the saturation of red / green / blue area B-Saturation R-Luminance, G-Luminance, Adjusts the luminance of red / green / blue area B-Luminance Adjusts more detailed Colour Management items [Y-Hue], [C-Hue], [M-Hue]:...
-
Page 63: Usb Hdd / Sd Card Recording
USB HDD / SD Card Recording You can record the digital TV programmes to the connected USB HDD or inserted SD Card and enjoy playing back in various ways. ● Analogue TV programme cannot be recorded on the USB HDD / SD Card. ●... - Page 64 Setting for USB HDD / SD Card Format and setup the USB HDD with this TV in order to use it for recording. Depending on the conditions of the SD Card, the recording may not work properly. Formatting the SD Card with this TV will resolve this problem.
- Page 65 Mode USB HDD Setup Product Name : The USB HDD is available for recording / playing back. USB Drive A USB HDD 1 USB Flash Disk Only one USB HDD on the list is available for recording. USB HDD name is displayed : The USB HDD is available for playing back.
- Page 66 ■ To stop recording on the way Confirm the code of the remote control to “73” (p. 31) ■ To play back or delete the recorded contents “Recorded TV mode” (p. 73) ● Even if One Touch Recording is in progress, you can play back all the contents. (Depending on the USB HDD / SD Card, it may not be available or the recording may not work properly while playback.) Record constantly [REW LIVE TV] (USB HDD only)
-
Page 67: Using Media Player
Using Media Player Media Player allows you to enjoy photo, video or music recorded on an SD Card and a USB Flash Memory, and contents recorded with this TV on the recording devices (SD Card / exclusive USB HDD). Photo mode: Still pictures recorded by digital cameras will be displayed. - Page 68 Starting Media Player Insert the SD Card or USB Flash Memory to the TV (p. 66) ● To play back contents in the USB HDD, check the connection and settings are completed. (p. 62, 63) ● When the SD Card is inserted, switching to Media Player will be done automatically. Start Media Player ●...
-
Page 69: Change The Contents
Change the contents You can switch to the other mode of Media Player from the thumbnail view. ● The mode can be switched in the current device. While the thumbnail is displayed, Select the content display the contents selection Contents Select select EXIT Select... -
Page 70: Multi Shot 3D
■ To sort by folder, recorded date or recorded month Display the view selection in the thumbnail view Select the sort type [Folder view]: select Displays the thumbnail grouped by folder. access ● The files which are not into a folder will be collected to the folder named “/”. [Sort by Date] / [Sort by Month]: Displays the thumbnail grouped by the same date or month. -
Page 71: Photo Settings
■ To enjoy the saved 3D photos Saved 3D photos are displayed in the Thumbnail screen. Wear the 3D Eyewear and enjoy the 3D photos. Example: Thumbnail Media Player Photo All photos Saved 3D photo Photo Settings Setup the settings for Photo mode. Display the option menu Select [Slideshow Settings] Select the items and set... - Page 72 Menu Item Adjustments / Configurations (alternatives) Selects enlarged or normal viewing on Single view and Slideshow [Normal] / [Zoom] ● This function is not available when [Frame] is set to [Collage], [Drift], [Gallery] or Screen Mode [Cinema] or when [Transition Effect] is set to [Motion]. ●...
-
Page 73: Video Mode
Video and Recorded TV mode ● Supported file format (p. 99, 100) Video mode (For SD Card / USB Flash Memory) The thumbnail of video titles in the SD Card or USB Flash Memory will be displayed. Example: Thumbnail - [Title view] The preview will start when the title / scene is highlighted if it supports Media Player Video... -
Page 74: Video Setup
■ Video Setup Setup the settings for Video mode. ● Menu items and selectable options vary depending on the content. Display the option menu Select [Video Setup] Select the items and set select Option Menu Video Setup access / store Menu Item Adjustments / Configurations (alternatives) - Page 75 ■ Playback from the list Select the content Start playback ● If you stopped the last playback on the way, the confirmation screen is displayed to select whether to start from where you stopped last time or from the beginning. (USB HDD only) ●...
-
Page 76: Audio Output Settings
● To jump to the specified time point While the time seek bar is displayed Press: Search about 10 seconds Press and hold: Search rapidly ● ● To change aspect To display the subtitle (if available) ● To confirm or change the current status (if available) “Display the selectable settings for the current status”... -
Page 77: Music Setup
Music mode ● Supported file format (p. 100) The thumbnail of music folders in the SD Card or USB Flash Memory will be displayed. Example: Thumbnail - [Folder view] ● To play back the selected folder Media Player Music Folder view /My Music_1 Select the folder Start playback... -
Page 78: Using Network Services (Dlna / Viera Connect)
To use this function with your smartphone, set [Network Remote Control] of this TV to [On]. (p. 80) And you need to install the application for controlling VIERA in your smartphone. For the information of the application: http://panasonic.jp/support/global/cs/tv/ For the operations, refer to the support information of the application. - Page 79 VIERA Connect is a gateway to the internet services unique to Panasonic. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as videos, games, communication tools, etc. from VIERA Connect home screen.
- Page 80 Network connections To use only DLNA features, you need a home network environment and you can operate the features without broadband network environment. To use VIERA Connect features, you need a broadband network environment. ● If you do not have any broadband network services, please consult your retailer for assistance. ●...
-
Page 81: Network Link Settings
[Manual]: Sets the restrictions for each equipment in the [Remote Device List]. Remote Device List Lists the accessible equipment to this TV on the home network ∗ Depending on the area, this function may not be available. For details, consult your local Panasonic dealer. -
Page 82: Wired Connection Settings
Wired connection settings This setting is for the network connection by using the LAN cable. Select [Network Connection] and set to [Wired] select Connection Test access / store Network Connection Wired Wireless Network Settings IP/DNS Settings Network Link Settings Software Update New Software Message Network Status Select [IP/DNS Settings] and set the items... -
Page 83: Wireless Connection Settings
Select [Connection Test] and access to test select Connection Test Access access ● Performs automatic testing of the network connection for the TV. (It takes a while to test.) Connection Test : succeeded Check network cable connection. The test is successful and the TV is connected to the network. Check acquired IP address. -
Page 84: Update Tv's Software
Enter the encryption key of the access point Set characters Store Wireless Network Settings select Encryption key A B C D E F G H J K L M N O P Q R S T U V W X Y Z v w x _ @ / “... - Page 85 Using DLNA features ® ● Ensure the preparation of the media server, network connections and network settings are completed. (p. 77 - 83) Display [VIERA TOOLS] and select [Media Server] select access Media Server Select one of the media servers to access Example: Media server list Media Server select...
- Page 86 [Slideshow] - Slideshow completes when all photos are viewed within the list. Select the photo file from the list for the first view Start Slideshow ● ● ● To display / hide the operation guide To pause (return to Single view) To return to list For video file Playback...
-
Page 87: Option Menu For Each Content
Option menu for each content Setup the settings for Photo, Video and Music file operations on this TV. Display the Select [Slideshow Settings], [Video Setup] Select the items and set option menu or [Music Setup] select Option Menu access / store Slideshow Settings Video Setup Music Setup... -
Page 88: Audio Output Settings (For Video Contents)
Audio output settings (for video contents) You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function) terminal. ● To confirm or change the current sound status (p. 86) Display the menu and Select [Sound] Select [SPDIF Selection] and set Sound SPDIF Selection... -
Page 89: Link Functions (Viera Link)
Use fully wired HDMI compliant cable. ● Connect the equipment supporting VIERA Link to the TV’s HDMI terminal via an HDMI cable. ● About HDMI cable for connecting Panasonic HD Video Camera or LUMIX Camera, read the manual of the equipment. -
Page 90: Viera Link (Hdmi And Audio Out Connections)
VIERA Link (HDMI and Audio out connections) Connected equipment Player theatre Blu-ray Disc theatre Amplifier Features Channel download – – – ∗ ∗ Easy playback – Power on link – Power off link Reduce unnecessary power ∗ – – consumption in Standby Auto standby for unnecessary ∗... -
Page 91: Easy Playback
” ∗ VIERA Link “ ∗ Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 5” function. These features are limited to models incorporating “HDAVI Control” and “VIERA Link”. ● Some functions are not available depending on the equipment’s version of HDAVI Control. Confirm the connected equipment’s version of HDAVI Control. - Page 92 Reduce unnecessary power consumption in Standby [Standby Power Save] Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 47) The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronisation with the TV On / Off state to reduce the consumption.
-
Page 93: Viera Link Control
Pause Live TV programme [Pause Live TV] You can pause the current TV programme and resume later. The current TV programme will be recorded on HDD of the connected DIGA Recorder. ● This function is available with a DIGA Recorder which has HDD. ●... -
Page 94: Operate The Menu Of The Equipment
Select [VIERA Link Control] select VIERA Link Menu Pause Live TV Start access Direct TV Rec Start VIERA Link Control Recorder Speaker Selection Home Cinema Select the equipment to access Select the type of the connected equipment and access. select VIERA Link Menu Pause Live TV Start... - Page 95 Speaker control [Speaker Selection] You can control the theatre speaker with this TV remote control pointing at the TV’s signal receiver. ● If you cannot operate, check the settings and the equipment. “Summary of features” (p. 88, 89), “Preparations” (p. 90) Display [VIERA TOOLS] and select [VIERA Link] select access...
-
Page 96: External Equipment
External Equipment These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment, the basic connection (p. 14 - 16), the table (p. 97), and the specifications (p. 111 - 113). ●... - Page 97 Headphones Less than 10 cm Rear of the TV (M3 stereo mini plug) Ferrite core - Small size (supplied) Installing the Ferrite core Pull back the tab Wind the cable twice Close ● To adjust volume [Headphone Volume] (p. 44) USB devices USB cable USB HDD...
- Page 98 Types of connectable equipment to each terminal Terminal AV2 IN ∗ Features To watch 3D contents (Blu-ray Disc Player) To watch satellite broadcasts (Set top box) To watch videocassettes / DVDs (VCR / DVD player) To watch camcorder images (Video camera) To play games (Game equipment) ∗...
-
Page 99: Technical Information
Technical Information Channel Allocation (Analogue TV) CH Display / Receive Channel CH 0 - CH 5 S 2 - S 10 CH 5A CH 6 - CH 9 CH 9A CH 10 - CH 12 S 11 - S 44 CH 20 - CH 75 CH Display / Receive Channel CH 1 - CH 11... - Page 100 MPEG2 MPEG Audio structure on the device is modified. ● This TV supports Motion JPEG DivX3 DivX4 Dolby Digital recorded by Panasonic LUMIX Camera ∗ DivX5 DivX6 Dolby Digital ● This TV is not available for playing back Plus H.264 BP/MP/HP .mov...
- Page 101 Dolby Digital DivX5 DivX6 .f4v Dolby Digital ● This TV supports this container H.264 BP/MP/HP Plus .m4v recorded by Panasonic products. For MPEG1 details, read the manual of the products. HE-AAC .mp4 MPEG2 MPEG Audio MPEG4 SP/ASP .flv H.264 –...
- Page 102 DivX DivX Certified to play DivX and DivX Plus HD (H.264/MKV) video up to 1080p HD including premium content. ® ® ® ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified ®...
-
Page 103: Devices For Recording/Playing Back
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the TV. Panasonic is not liable for any deterioration or damage of recorded data. Recording time for the USB HDD / SD Card Recording... -
Page 104: Dvi Connection
HDMI connection HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression standard. HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment. HDMI-compatible equipment ∗ with an HDMI or DVI output terminal, such as a DVD player, a set top box or game equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable. - Page 105 You cannot use two or more same kind of USB devices simultaneously except USB Flash Memory or USB HDD. ● Additional information for the devices may be on the following website. http://panasonic.jp/support/global/cs/tv/ Bluetooth Setup You can use Bluetooth keyboards ∗...
- Page 106 ■ USB Gamepad ● Check the gamepads that have been tested for the performance with this TV at the following website. http://panasonic.jp/support/global/cs/tv/ ● Some of the keys of gamepads correspond to the operation of the remote control. Example: Remote Control...
- Page 107 Characters table for numeric buttons You can enter characters by using numeric buttons for free input items. Press the numeric button repeatedly until you reach the User input desired character. Name A B C D E F G H J K L M N O P Q R S T ●...
-
Page 108: Faqs
Each one of these dots is precisely controlled by the electronics of the TV to produce the picture. Whilst Panasonic maintains the highest standards in manufacturing technology and processes in the construction of these panels, there are a number of allowable pixel/subpixel failures that still allow the panel to be defined as a good panel. - Page 109 Problem Causes / Actions ● Is “Sound mute” active? (p. 11) No sound is produced ● Is the volume set to the minimum? Sound level is low or ● Sound signal reception may be deteriorated. ● sound is distorted Set [MPX] (p. 44) in the Sound Menu to [Mono]. (Analogue TV) ●...
- Page 110 Problem Causes / Actions ● To maintain optimum antenna signal quality, use an ‘F’ type TV signal splitter (as illustrated) when connecting two or more devices to the same antenna socket. RG6Q Fly Lead ‘F’ type Antenna Splitter Connecting devices such RG6Q Fly Lead as DTV recorder / PVR / VCR etc that also require...
- Page 111 TV off with Mains power On / Off switch, then turn it on again. message appears ● Check foreign objects are not inside the USB port. ● Follow the message’s instructions. An error message appears ● If the problem persists, contact your local Panasonic dealer or the authorised service centre.
-
Page 112: Specifications
Specifications VT50A series VT50Z series GT50Z series TH-P60GT50Z TH-P65VT50A TH-P65VT50Z Model No. TH-P55GT50Z TH-P55VT50A TH-P55VT50Z TH-P50GT50Z PAL B / G Reception of Off air broadcasts 7 MHz VHF / UHF (Australia) 8 MHz UHF (New Zealand) free-to-air TV Digital TV free-to-air TV broadcast reception broadcast reception PAL 60 Hz... - Page 113 TV (continue) 50” class 55” class TH-P55VT50A Model No. TH-P50GT50Z TH-P55GT50Z TH-P55VT50Z AC 220-240 V, 50 / 60 Hz AC 220-240 V, 50 / 60 Hz AC 220-240 V, 50 / 60 Hz Power rating 2.4 A 2.4 A 2.4 A Normal (Home) 137 W 184 W...
-
Page 114: Licence
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. At least three (3) years from delivery of products, Panasonic will give to any third party who contact us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under LGPL. -
Page 115: Warranty
If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable period by contacting the Panasonic Customer Care Centre. If the failure in the product is not a major failure then Panasonic may choose to repair or replace the product and will do so in a reasonable period of time from receiving notice from you. -
Page 116: Warranty
WARRANTY - New Zealand only NEW ZEALAND Distributed in New Zealand by Panasonic New Zealand Limited 350 Te Irirangi Drive East Tamaki, Private Bag 14911, Panmure Auckland Tel. 09 272 0100 Customer Care Center Email: Customerservice@nz.panasonic.com www.panasonic.co.nz Warranty...