Performing The Initial Configuration; Getting Your Network Information; Setting The Fast Ethernet Port Ip Address - Cisco VG224 - Analog Phone Gateway Quick Start Manual

Voice gateway

Hide thumbs Also See for VG224 - Analog Phone Gateway:

Software manual (66 pages)

Hardware installation manual (75 pages)

Manual (10 pages)

Table Of Contents

Table of Contents

The green LED next to the auxiliary port should come on and the fan should operate. If this does not happen, see the

power-on procedure in the Cisco VG224 Voice Gateway Hardware Installation Guide.

The following message appears at the end of the boot-up messages:

--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]:

Step 3

Enter no to proceed with manual configuration using the command-line interface (CLI):

Would you like to enter the initial configuration dialog? [yes/no]: no

Would you like to terminate autoinstall? [yes]

Press Return to terminate autoinstall and continue with manual configuration.

Step 4

Several messages appear, ending with a line similar to the following:

...

Compiled <date> <time> by <person>

Press Return to bring up the

Step 5

...

flashfs[4]: Initialization complete.

Router>

Step 6

Enter privileged EXEC mode:

Router> enable

Router#

Step 7

Continue with the next section, "Performing the Initial Configuration."