hit counter script

Installing The Printer Driver And The Software For Rj-4040; Before You Begin - Brother RJ4040-K RuggedJet w/WiFi Battery User Manual

User guide
Table of Contents

Advertisement

Chapter 1
Installing the Printer
Driver and the Software
for RJ-4040
The RJ-4040 printer driver and software can
be installed using the following methods:
USB cable connection
Wireless network connection
When using a wireless network, please read
from Before You Begin below to Choosing
Your Wireless Install Method.
When using a USB cable, please read from
Installation Procedure (Using USB
Cable/Wireless Network) uu page 12.

Before You Begin

First you must configure the wireless network
settings of your printer to communicate with
your network access point/router. After the
printer is configured to communicate with
your access point/router, computers on your
network will have access to the printer. To
use the printer from these computers, you will
need to install the drivers and software. The
following steps will guide you through the
configuration and installation process.
10
If you are going to connect the
printer to your network, we
recommend that you contact your
system administrator prior to
1
installation. You must know your
wireless network settings before
you proceed with this installation.
If you have previously configured
the printer's wireless settings, you
must reset the network settings
before you can configure the
wireless settings again.
1 Press and hold the
button to turn the printer off.
2 Press and hold the
button and the
until the POWER, STATUS and
BATTERY indicators start
blinking in orange.
1
3 While pressing the
button, press the
button once.
4 Release the
and the
same time.
Note
To achieve optimum results with normal
everyday document printing, use the
printer as close to the network access
point/router as possible with minimal
obstructions. Large objects and walls
between the two devices as well as
interference from other electronic devices
can affect the data transfer speed of your
documents.
Due to these factors, wireless may not be
the best method of connection for all types
of documents and applications.
The maximum processing speed is
possible when using USB.
(Power)
(Feed)
(Power) button
(Power)
(Feed)
(Power) button
(Feed) button at the

Advertisement

Table of Contents
loading

Table of Contents