hit counter script
Canon LV-8320 User Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Projector
  5. LV-8320
  6. User manual
Canon LV-8320 User Manual

Canon LV-8320 User Manual

Network set-up and operation
Hide thumbs Also See for LV-8320:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
User's Manual
Network Set-up and Operation
Wired Setting
Projector Set-up and Operation
This is the manual for the Network function.
Read this manual thoroughly to operate the Network function.
First, read the user's manual of the projector to understand the basic
operation of the projector and the safety instructions.
The safety instructions in the user's manuals should be followed strictly.
for LV-8320

Advertisement

Table of Contents
loading

Related Manuals for Canon LV-8320

Summary of Contents for Canon LV-8320

  • Page 1 Read this manual thoroughly to operate the Network function. First, read the user's manual of the projector to understand the basic operation of the projector and the safety instructions. The safety instructions in the user's manuals should be followed strictly. for LV-8320...

  • Page 2: Compliance

    If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. Tel No. (516)328-5600 Canadian Radio Interference Regulations This class B digital apparatus complies with Canadian ICES-003.

  • Page 3: Safety Instructions

    Safety instructions Please read and understand all instructions thoroughly before using. About safety symbols The following symbols are used in this manual to alert you to important safety information. Always observe the instructions to reduce the risk of injury and property damage. Indicates a potentially hazardous situation which, if not avoided, may WARNING cause death or serious injury.

  • Page 4: Table Of Contents

    Table of contents Compliance ....................................2 Safety instructions ..................................3 Table of contents ..................................4 Chapter 1 Preparation ....................5 Features....................................6 Required operating environment for computers ..................7 Network specifications of the projector ......................7 Flow of installation ................................9 Chapter 2 Setup Procedures.................. 11 Connecting to the LAN line ............................ 12 Network configuration ............................... 12 Network PIN code .................................

  • Page 5: Chapter 1 Preparation

    Chapter 1 Preparation Describes features and operating environment of this projector.

  • Page 6: Features

    Chapter 1 Preparation Features Web Management function (+p.31) With this func tion, you can monitor projector functions such as power status, lamp s t at us , inp u t m o d e, si gnal condition, lamp-use time, etc. through the network by using the web browser installed on Turn ON PJ2...

  • Page 7: Required Operating Environment For Computers

    Features Required operating environment for computers When operating the projector via networks, computers should meet the operating envi- ronment below. Windows XP (32bit version), Operating System Windows Vista (32bit version), Windows 7 (32bit version) Mac OS X v 10.4 or 10.5 Windows: Pentium III 900MHz or more Recommended CPU Macintosh : 800 MHz PowerPC G4 or faster, or 1.8 GHz Intel Core...
  • Page 8 Chapter 1 Preparation Cabling Between the Projector and a Hub or computer Use an appropriate cable when connecting the projector and a hub or computer. Connection Ethernet cable type Max. cable length Projector - Hub STP straight-through category 5 * cable 100m (328feet) Projector - Computer STP crossover category 5* cable 100m (328feet)

  • Page 9: Flow Of Installation

    Flow of installation Flow of installation To use the projector via the networks, follow the setup procedures below. STEP 1 Connect the LAN and set the configuration. Decide depending on the LAN environment. ➔ “2. Setup Procedures” (pp.11–16). Detailed LAN configurations need to be done with a browser later. First, complete the Wired LAN connection between computers and projec- tors, then start browser configurations.
  • Page 10 Chapter 1 Preparation...

  • Page 11: Chapter 2 Setup Procedures

    Chapter 2 Setup Procedures Describes how to configure the network.

  • Page 12: Connecting To The Lan Line

    Chapter 2 Setup Procedures Setting procedures and contents differ depending on the LAN installation location. When installing, consult your system administrator to set up the LAN appropriately. Connecting to the LAN line Connect the LAN cable to the LAN connection terminal of the projector. LAN Connection Terminal ACT Lamp (Orange)
  • Page 13 Network configuration 3. Select "Network setting" in the Network menu and press OK button, and then the LAN setting screen will appear and selected LAN settings will be displayed. Adjust each item to the setting environment. Consult your system administrator about the detailed settings.

  • Page 14: Network Pin Code

    Chapter 2 Setup Procedures Network PIN code The Network PIN code is to restrict the access to the projector through the network. After setting the Network PIN code, you need to enter it to operate the projector via the networks. 1.

  • Page 15: Network Factory Default

    Network factory default Network factory default 1. Select “Network factory default” in the Network menu and press OK button. 2. A confirmation box appears and select "Yes" and then press OK button. 3. Another confirmation box appears and select "Yes" and then press OK button. 4.

  • Page 16: Wired Lan Factory Default Settings

    Chapter 2 Setup Procedures Wired LAN factory default settings SELECTED LAN Parameter LAN 1 LAN 2 LAN 3 DHCP IP ADDRESS 169.254.100.100 192.168.100.100 192.168.100.100 SUBNET MASK 255.255.0.0 255.255.255.0 255.255.255.0 GATEWAY ADDRESS 255.255.255.255 255.255.255.255 255.255.255.255 DNS ADDRESS 255.255.255.255 255.255.255.255 255.255.255.255...

  • Page 17: Chapter 3 Basic Setting And Operation

    Chapter 3 Basic Setting and Operation Describes basic operations and settings for controlling the projec- tor by using the web browser. It is required that computer and projector is connected to the network and the network address is properly configured.

  • Page 18: Login The Setting Page Of The Projector

    Chapter 3 Basic Setting and Operation Login the setting page of the projector [1] Enter the IP address Launch the web browser installed in your computer, enter the IP address into the "Address" on the browser and then press "Enter" key. Enter the address that you configured in item "Network configuration"...

  • Page 19: Display Of Main Setting Page

    Login the setting page of the projector [3] Display of main setting page The following main setting page will be displayed according to your display mode selection. Perform various kinds of settings through this page. Click on the menus to dis- play the control and setting pages.

  • Page 20: How To Use The Setting Page

    Chapter 3 Basic Setting and Operation How to use the setting page To control and set up the projector, use the setting menus on the web browser. Describes the basic operation and procedures commonly used on this manual. Example of the setting page The setting menu appears when clicking the sub menu tab.
  • Page 21 How to use the setting page Radio button setting Select an item by selecting a radio button. Check box setting Select items by ticking on check boxes.

  • Page 22: Initial Setting

    Chapter 3 Basic Setting and Operation Initial setting After installing the projector, perform the following basic initial setting. Click Initial setting on the main menu to display the initial setting page. * The serial number in the figure is used for an example. Item Description Language ....

  • Page 23: Network Pin Code Setting

    Initial setting Network PIN code setting This is to set the Network PIN code to restrict the access from an unauthorized person through the network. Enter a 4-digit number as the Network PIN code onto the text box and click Set button. The projector begins restarting and it takes about 10 seconds.

  • Page 24: Network Configuration

    Chapter 3 Basic Setting and Operation Network configuration Click Network on the main menu. The following setting page is displayed. The IP Address, Subnet Mask, Default Gateway, DNS (Domain Name Server) and projector name are set up on this menu. The IP address and Subnet Mask have been configured already in chapter "Installation".

  • Page 25: E-Mail Setting

    E-mail setting E-mail setting This projector has an E-mail function which can send an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. So must be set this E-mail setting. Click E-mail setting on the main menu and follow the below steps.
  • Page 26 Chapter 3 Basic Setting and Operation Setting SMTP server and administrator address Enter the server name or IP address of the SMTP server* , the port number of the SMTP server and administrator address and click Set button. The administrator address is set to "Reply-To"...
  • Page 27 E-mail setting Setting SMTP authentication Set the SMTP authentication concerned and click Set button. Please contact your network administrator in details. Setting POP server When "POP before SMTP" is selected at "Auth" of "SMTP Authentication setting", enter "POP server* " and "POP server port" and click Set button.

  • Page 28: Examples: Type And Contents Of Alert Mail

    Chapter 3 Basic Setting and Operation Examples: Type and contents of alert mail When the projector has an abnormality, the following alert messages are sent to the regis- tered E-mail address according to your selected condition. Administrator or user can take an efficient action quickly by receiving this message.

  • Page 29: Snmp Setting

    SNMP setting SNMP setting This projector provides a SNMP (Simple Network Management Protocol) agent function. The SNMP consists of a manager and agents. The group which communicates information each other with SNMP is called "Community". There are two access modes in a community, Refer (read only) and Set (read- write).
  • Page 30 Chapter 3 Basic Setting and Operation Trap check/delete Check and delete the trap address Checking the registered trap address and deleting the address. To delete the address, tick check box in front of the IP address and click Delete button. ✐ Up to 10 trap addresses can be registered. Trap option Trap option setting Tick check boxes in front of the condition item...

  • Page 31: Chapter 4 Controlling The Projector

    Chapter 4 Controlling the Projector Describes controlling and setting of the projector by using the web browser.

  • Page 32: Power Control And Status Check

    Chapter 4 Controlling the Projector Power control and status check Click Power & Status on the main menu. The control page will be dis- played. By clicking ON or Standby button on the page, the power of the projector can be con- trolled.
  • Page 33 Power control and status check About projector condition Status Description Normal ............... Projector is operating normally. Power management in operation ... Power management is operating. Lamp failure ........... Lamp failure is occurring. Abnormal Temperature ......The temperature of the projector became too high. Standby after Abnormal Temp..Projector detects abnormal temp. and sets into standby mode. Power failure ..........

  • Page 34: Control

    Chapter 4 Controlling the Projector Control Click Control on the main menu. The setting method differs depending on the contents of the page. Click on the page number to change pages and select desired setting items. ✐ Please see the user's manual of the projector to have the further information of each control item.

  • Page 35: System

    Control System This function is to select the system of signal input to the projector. The available system mode are listed on the pull-down menu but- ton according to the input signal. Select a system and then click Set button. Available selection at the ANALOG PC input Item Description...

  • Page 36: Sound

    Chapter 4 Controlling the Projector Sound This function is to adjust the sound of the projector. The values in the text box represent the current control value or status. Item Description Volume ....Adjusts the sound volume from the speaker. (0 ~ 63) Mute ......

  • Page 37: Image Adjustment

    Control Image adjustment This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and to load the adjusted value, click Load button. Item Description Contrast ......Adjusts picture con- trast.

  • Page 38: Pc Adjustment

    Chapter 4 Controlling the Projector PC adjustment Click PC Adj. on the main menu. This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Item Description Current mode ..Displays a current mode like VGA, SVGA, XGA, SXGA, UXGA, WXGA, etc. or Mode1 - Mode10 which are the customized mode created by using the "Mode Store"...

  • Page 39: Setting Up The Projector

    Setting up the projector Setting up the projector Click Setting on the main menu. This function is to set up the projector. Select the sub menu [Aspect setting] or [Setting] and then set up each set- ting. Aspect setting This function is to adjust the aspect mode of the projector. The values in the text box rep- resent the current aspect status.

  • Page 40: Setting 1

    Chapter 4 Controlling the Projector Setting 1 Item Description Language ....Sets the language display of projector's on-screen display menu. Auto setup ... Executes the Auto input, Auto PC, and Auto keystone functions below according to the each setting after Start clicking button.

  • Page 41: Setting 3

    Setting up the projector Setting 3 Item Description Filter counter(h) ........Displays the filter counter. Reset the time after filter clean-up. Click "Reset", a con- firmation display appears, and then click "OK", the time will be reset. Filter warning..Sets the time to indicate the filter warn- ing message on the screen.

  • Page 42: Information

    Chapter 4 Controlling the Projector Information This page is to display the basic information of the projector status. Click Information on the main menu. Click this button to update the information. Information Items Description Input ..........Displays selected input and source. System ........Displays selected signal system.
  • Page 43 Information Indication of the lamp status Icon display/background Status Lamp on (Normal) White/Blue Lamp on (Lamp is being used over a specified use time, replace lamp White/Red immediately) Lamp off (Normal) Gray/Blue Lamp off (Lamp is being used over a specified use time, replace lamp Gray/Red immediately) Lamp failure (Lamp failure, check lamp condition)
  • Page 44 Chapter 4 Controlling the Projector...

  • Page 45: Chapter 5 Appendix

    Chapter  Appendix Examples of connection Use of telnet Web browser setting Q & A Menu Tree...

  • Page 46: Examples Of Connection

    Chapter 5 Appendix Examples of connection Peer-To-Peer connection Connecting the projector (PJ01) to the control computer (PC05) directly. * STP cross cable Computer Name: PC05 Projector Name: PJ01 IP Address : 192.168.0.5 IP Address : 192.168.0.2 Subnet Mask : 255.255.255.0 Subnet Mask : 255.255.255.0 Default Gateway :...
  • Page 47 Examples of connection The gateway (Router) installed in the network Connecting the projector (PJ01) to the control computer (PC05) via the gateway. Entrance hall Computer Name : PC205 IP Address : 192.168.200.5 Subnet Mask : 255.255.255.0 Default Gateway : 192.168.200.1 : 192.168.201.1 Projector Name: PJ01 IP Address...

  • Page 48: Use Of Telnet

    Chapter 5 Appendix Use of telnet You can control the projector by using the telnet application installed on your computer. Normally, the telnet application is available on your computer. * The telnet 10000 port is used to control the projector. Control (For example, in case of using the telnet (For example, in case of using the telnet...
  • Page 49 Use of telnet 3. When communication is established correctly, the word "PASSWORD:" appears on the window. Type the login password (Network PIN code ) for the projector and then press "Enter" key on the keyboard. If you do not set up the Network PIN code, just press "Enter" key.

  • Page 50: Web Browser Setting

    Chapter 5 Appendix Web browser setting This projector is designed to be set up and controlled from an Internet web browser. Depending on the preference settings of the web browser, some control functions may not be available. Please make sure that the following functions are set up properly in the web browser.

  • Page 51: Examples: Os/Browsers

    Web browser setting Examples: OS/Browsers Windows XP Professional Internet Explorer v.6.0 ActiveScript setting Select Internet Options from Tools menu on the web browser and then select Security tab and click Customize Level… button. On the security setting window, scroll down and find the Scripting item, make sure that "Enable"...

  • Page 52: Proxy Setting

    Chapter 5 Appendix Proxy setting Select Internet Options from Tools menu on the web browser and then select Connection tab and click LAN Settings button. Properly set up your web browser's the proxy server settings according to the local area network environment to which the pro- jector is connected.
  • Page 53 Web browser setting Netscape Navigator v.7.1 JavaScript Setting Select Preference from Edit menu on the web browser a n d t h e n s e l e c t t h e i t e m Advanced/Scripts & Plugins in the Category column.
  • Page 54 Chapter 5 Appendix MAC OS X v 10.4 Safari v.3.2.1 JavaScript enable setting Selec t Preferences... from Safari on the web browser and then select S e c u r i t y t a b a n d c h e c k E n a b l e JavaScript.

  • Page 55: Q&A

    Q&A Q&A Installation/Access Why doesn’t the setting page appear in my web browser? Following causes are possible. Please check them. 1. The projector does not connect to the network. Check LED indicators status (+ p.12). - Check the connection of LAN cable if the LINK Lamp does not light green. - Check the network configuration of the projector if the ACT Lamp does not blink orange.
  • Page 56 Chapter 5 Appendix We use the DHCP/BOOTP server to assign the IP address. Is it possible to use the projector in this network environment? Possible. This projector supports the DHCP/BOOTP server. To use this projector in this network environment, set it up so that the DHCP/BOOTP server does not assign the IP address configured to this projector for another device on the network.
  • Page 57 Q&A Operation Why can't be turned on/off with web browser? Please make sure the settings of the projector are correct to use the projector. Please set the Standby mode of the projector's Setting menu to "Network". Refer to "4. Controlling the Projector" ➔ "Power control and status check" (+ pp.32 - 33). Why can't I change the controls in the setting page with web browser? Please make sure the projector is turned on.
  • Page 58 Chapter 5 Appendix Others What are the rules for IP address assignment? If the network is constructed with TCP/IP protocol, a unique IP address is required for each piece of network equipment. The following are basic rules of the assign- ment.
  • Page 59 Q&A Can I update the firmware of the projector. It is possible to update the firmware through the network. It is required to have a special tool for the updating. For further information please consult your local deal- er. The version number of the firmware is indicated on the lower part of the "Initial setting"...

  • Page 60: Menu Tree

    Chapter 5 Appendix Menu Tree Projector Menu Network LAN mode select LAN1/LAN2/LAN3 Network setting DHCP On/DHCP Off Network PIN code Network information Main Program MAC address IP address Network factory default Yes/No Web Menu Initial setting Language English/Japanese Model name SERIAL NO.
  • Page 61 Menu Tree Aspect setting Aspect Normal/Full/16:9/Zoom/True/Natural wide/Custom Setting Ceiling ON/OFF Rear ON/OFF Screen aspect Default(16:10)/16:9/4:3 Reset Language Setting 1 22 Language ON1/ON2/OFF Auto setup Auto input ON/OFF Auto PC Auto/Manual/OFF Auto keystone Background Blue/Black/User Display OFF/Countdown off/ON Logo OFF/Default/User Setting 2 Terminal COMPUTER2/Monitor out Picture in Picture...
  • Page 62 Amadora, Portugal CANON Belgium N.V./S.A. Berkenlaan 3, 1831 Diegem (Mechelen), Belgium CANON U.S.A. INC. CANON Netherland NV One Canon Plaza, Lake Success, NY Neptunusstraat 1, 2132 JA Hoofddorp, 11042-1198, U.S.A. The Netherlands For all inquires concerning this product, call CANON LUXEMBOURG S.A.

Table of Contents