hit counter script
Sony STRDG500S Service Manual

Sony STRDG500S Service Manual

Multi channel av receiver
Table of Contents

Advertisement

STR-DG500/DG600

SERVICE MANUAL

Ver. 1.0 2006. 02
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", "Surround EX", and the double-D
symbol are trademarks of Dolby Laboratories.
"DTS", "DTS-ES", "Neo:6", and "DTS 96/24" are
trademarks of Digital Theater Systems, Inc.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(Models of area code US only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Power Output
Models of area code US, CND
Stereo Power Output
1)
, Reference Power Output
8 ohms 20 Hz – 20 kHz, THD 0.09 %
100 W + 100 W, 110 W/ch
8 ohms 1 kHz, THD 0.7 %
110 W + 110 W, 120 W/ch
8 ohms 1 kHz, THD 10 %
125 W + 125 W, 150 W/ch
Models of area code AEP, UK, E2, TW, AUS
Stereo Power Output
1)
, Reference Power Output
8 ohms 20 Hz – 20 kHz, THD 0.09 %
85 W + 85 W, 110 W/ch
8 ohms 1 kHz, THD 0.7 %
100 W + 100 W, 120 W/ch
8 ohms 1 kHz, THD 10 %
125 W + 125 W, 150 W/ch
Sony Corporation
9-887-127-01
2006B04-1
Home Audio Division
© 2006. 02
Published by Sony Techno Create Corporation
Photo: STR-DG600: Silver type
SPECIFICATIONS
1) 2)
1) 2)
Australian Model
Models of area code KR
1)
Stereo Power Output
, Reference Power Output
8 ohms 20 Hz – 20 kHz, THD 0.09 %
85 W + 85 W
70 W + 70 W
8 ohms 1 kHz, THD 0.7 %
100 W + 100 W
90 W + 90 W
8 ohms 1 kHz, THD 10 %
125 W + 125 W
110 W + 110 W
1) Measured under the following conditions:
Area code
Power requirements
US, CND
120 V AC, 60 Hz
AEP, UK, KR
230 V AC, 50 Hz
E2, AUS
240 V AC, 50 Hz
TW
110 V AC, 60 Hz
2) Reference power output for front, center, surround
and surround back. Depending on the sound field
settings and the source, there may be no sound output.
3) Measured under the following conditions:
Area code
Power requirements
KR
220 V AC, 50 Hz
MULTI CHANNEL AV RECEIVER
US Model
Canadian Model
STR-DG500/DG600
AEP Model
UK Model
E Model
STR-DG500
1) 2)
1)
,
3)
, 110 W/ch
1)
,
3)
, 120 W/ch
1)
,
3)
, 150 W/ch
– Continued on next page –
1

Advertisement

Table of Contents
loading

Summary of Contents for Sony STRDG500S

  • Page 1: Service Manual

    100 W + 100 W, 120 W/ch 8 ohms 1 kHz, THD 10 % 125 W + 125 W, 150 W/ch MULTI CHANNEL AV RECEIVER Sony Corporation 9-887-127-01 2006B04-1 Home Audio Division © 2006. 02 Published by Sony Techno Create Corporation...
  • Page 2 STR-DG500/DG600 Frequency response Video section Analog 10 Hz – 70 kHz Inputs/Outputs +0.5/–2 dB (with sound Video: 1 Vp-p, 75 ohms field and tone (DG500) or S-video (DG600): Y: 1 Vp-p, 75 ohms equalizer (DG600) bypassed) C: 0.286 Vp-p, 75 ohms Inputs COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms...
  • Page 3 REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL IN SUPPLEMENTS PUBLISHED BY SONY. OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
  • Page 4: Table Of Contents

    STR-DG500/DG600 TABLE OF CONTENTS 1. GENERAL Description and location of parts (STR-DG500) ....5 Description and location of parts (STR-DG600) ....7 2. DISASSEMBLY 2-1. Case ................... 10 2-2. Front Panel Section ............11 2-3. Back Panel Section ............11 2-4.
  • Page 5: General

    STR-DG500/DG600 SECTION 1 GENERAL This section is extracted from instruction manual. STR-DG500: Name Function Name Function Getting Started F DISPLAY R VIDEO 3 IN/ Press to select information To connect a camcorder or displayed on the display PORTABLE AV IN video game (page 23, 31).
  • Page 6 Rear panel OUTPUT section You can use the supplied remote RM-AAU005 COMPONENT Connects to a DVD Green to operate the receiver and to control the Sony VIDEO player, TV, or a INPUT/ satellite tuner. You audio/video components that the remote is...
  • Page 7: Description And Location Of Parts (Str-Dg600)

    STR-DG500/DG600 STR-DG600: Name Function Name Function Getting Started E Display Q CATEGORY +/– Press to select a category The current status of the selected component or a (page 67). list of selectable items R CATEGORY Description and location of parts Press to select the appears here (page 7).
  • Page 8 Press to select the channel You can use the supplied remote RM-AAP012 audio/video components that entry mode, either one or two to operate the receiver and to control the Sony the remote is programmed to digit of the TV, Blu-ray disc operate.
  • Page 9 Blu-ray disc recorder, recorder, hard disc recorder, are factory assigned to control PSX, or satellite tuner. hard disc recorder, or PSX. Sony components as follows. ANGLE Press to select the viewing – fast forward/rewind of the You can program the remote...
  • Page 10: Disassembly

    STR-DG500/DG600 SECTION 2 DISASSEMBLY Note : This set can be disassemble according to the following sequence. 2-1. CASE (Page 10) 2-2. FRONT PANEL SECTION 2-3. BACK PANEL SECTION (Page 11) (Page 11) 2-6. STANDBY BOARD 2-4. DIGITAL BOARD 2-7. SB AMP BOARD (Page 13) (Page 12) (DG600)
  • Page 11: Front Panel Section

    STR-DG500/DG600 2-2. FRONT PANEL SECTION 6 two screws (+BVTP 3 × 8) 4 CNP202 (3P) 2 CNP791 (4P) 1 CNP2000 (4P) 5 CNP503 (3P) 8 front panel section 3 CNS505 (23 core) 7 five screws (+BVTP 3 × 8) 2-3. BACK PANEL SECTION 0 screw (+BVTP 3 ×...
  • Page 12: Digital Board

    STR-DG500/DG600 2-4. DIGITAL BOARD 2 CNP503 (5P) 1 CNP505 (10P) 5 DIGITAL board 3 CNP504 (7P) 4 screw (+BVTP 3 × 8) 2-5. MAIN BOARD SECTION 7 screw 4 CNP802 (5P) (+BV3 (3 -CR) ) 3 CNP801 (3P) 6 two screws (+BV3 (3 -CR) ) 5 two screws (+BV3 (3 -CR) )
  • Page 13: Standby Board

    STR-DG500/DG600 2-6. STANDBY BOARD 4 STANDBY board 3 screw (+BVTP 3 × 8) 1 CNP902 (2P) 2 CNP804 (3P) 2-7. SB AMP BOARD (DG600) 3 two screws (+BVTP 3 × 8) 4 three screws (transister) 2 CN2570 (5P) 5 SB AMP board 1 CN2571 (9P) MAIN board section...
  • Page 14: Test Mode

    STR-DG500/DG600 SECTION 3 TEST MODE FACTORY PRESET MODE SOUND FIELD CLEAR MODE * All preset contents are reset to the default setting. * The preset sound field is cleared when this mode is activated. * Procedure: Use this mode before returning the product to clients upon While depressing the [SPEAKERS $OFF/A/B/A+B%] and the completion of repair.
  • Page 15: Diagrams

    STR-DG500/DG600 SECTION 4 DIAGRAMS 4-1. BLOCK DIAGRAM — TUNER/AUDIO SECTION — VIDEO 3 IN/ DG600 PORTABLE AV IN VIDEO 1 VIDEO 2 SA-CD/CD MD/TAPE MD/TAPE DVD AUDIO AUDIO AUDIO OUT AUDIO IN AUDIO IN J400(DG600) –7V J402(DG500) J403 J298(2/2) FUNCTION SELECT J404 IC401 AVEE...
  • Page 16: Block Diagram - Digital Section

    STR-DG500/DG600 4-2. BLOCK DIAGRAM — DIGITAL SECTION — 8CH DAC IC1401 DG600 DG500 IC1501 IC1452 IC1403 VOUT5 L OUT DOUT DATA3 L IN AUDIO L-IN SDI1 SD01 VOUT6 SD02 24 R-CH TUNER/ SD03 25 AUDIO LRCK 13 SECTION BCK 14 (Page 15) R-IN R-CH...
  • Page 17: Block Diagram - Video Section

    STR-DG500/DG600 4-3. BLOCK DIAGRAM — VIDEO SECTION — DG600 Y/C SEPARATION IC370 COMPONENT VIDEO SELECT BUFFER IC304 IC372 V+1,+2 VIDEO AMP +5V-3 J301 (1/2) Q327 6dB AMP J301 (2/2) YOUT CH1 IN2 Y PROCESS 75Ω CHI OUT CH1 IN3 Q371 DRIVER VIDEO 2 6dB AMP...
  • Page 18: Block Diagram - Xm Section (Dg600)

    STR-DG500/DG600 4-4. BLOCK DIAGRAM — XM SECTION (DG600) — XM DIGITAL TRANSCEIVER IC102 SCTXOUT XM MIXMI KEY/DISPLAY SCRXIN XM MIXMO SECTION 18 COMRXP COMMSEL (Page 19) BUFFER 19 COMRXT XM64FS IC103 XMDATA 23 COMTXP J101 –D XMFS XMCOMMAND 22 COMTXM XM256FS XMREQ 26 OSCOUT...
  • Page 19: Block Diagram - Key/Display Section

    STR-DG500/DG600 4-5. BLOCK DIAGRAM — KEY/DISPLAY SECTION — FL DISPLAY DRIVER SYSTEM IC100 CONTROL IC1101 (4/5) MIC AMP IC2000 SEG1 D2014 FL101 FL LAT 9 STB SEG16 J2000 VACUUM 38 ADCC BUFFER 7 DIN AUTO FLUORESCENT IC101 GRID12 8 CLK CAL MIC DISPLAY GRID1...
  • Page 20: Block Diagram - Power Section

    STR-DG500/DG600 4-6. BLOCK DIAGRAM — POWER SECTION — DG600 J310 SURROUND PRE OUT R-CH J791 PHONES R-CH PRE DRIVER IC701 TM600(DG600) TM602(DG500) +VOUT2 IN 2 DRIVE -VOUT2 L-CH DRIVE POWER AMP RELAY Q701-704 DRIVER CURRENT OVERLOAD FRONT B R-CH R-CH R-CH Q790 DETECT...
  • Page 21: Circuit Boards Location

    STR-DG500/DG600 4-7. CIRCUIT BOARDS LOCATION THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) for schematic diagram: for printed wiring boards: • X : parts extracted from the component side. •...
  • Page 22: Printed Wiring Boards - Main Section

    STR-DG500/DG600 4-8. PRINTED WIRING BOARDS — MAIN SECTION — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. TM601 J401 J400 J402 J403 J404 J309 J310 CC17 R321 R436 CC13 RR14 R310 CC15 RR13 R311 CC36 RR12 JW774 JWH122...
  • Page 23: Schematic Diagram - Main Section (1/3)

    STR-DG500/DG600 4-9. SCHEMATIC DIAGRAM — MAIN SECTION (1/3) — CN720 J402 J400 WP100 (Page 34) R451 R401 CNP501 CC52 R452 CC02 R402 C702 C464 CC59 R459 C495 C497 C490 C485 C459 C762 CC09 R409 C409 (Page 30) (Page 24) J403 CC54 R454 CC04...
  • Page 24: Schematic Diagram - Main Section (2/3)

    STR-DG500/DG600 4-10. SCHEMATIC DIAGRAM — MAIN SECTION (2/3) — • Refer to page 48 for IC Block Diagrams. IC B/D CN792 CNP791 C790 R719 C720 IC701 J791 R745 C717 R794 R714 Q701 R740 C742 D740 C791 R744 Q705 R746 R710 R711 Q703 C740...
  • Page 25: Schematic Diagram - Main Section (3/3)

    STR-DG500/DG600 4-11. SCHEMATIC DIAGRAM — MAIN SECTION (3/3) — (Page 23) (Page 24) J309 R470 RY560 R468 R469 D802 Q560 C400 Q801 R803 IC402 C805 CNP801 D560 R533 R532 C471 C803 C822 C801 R804 C804 R802 R474 C499 C809 C806 R806 C802 (Page 35)
  • Page 26: Printed Wiring Board - Digital Section (1/2)

    STR-DG500/DG600 4-12. PRINTED WIRING BOARD — DIGITAL SECTION (1/2) — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. C1913 JR1202 C1251 C1253 C1316 C1105 R1016 C1141 R1014 R1012 R1354 R1010 R1017 R1015 R1321 R1013 R1316 C1104 R1011 R1318...
  • Page 27: Printed Wiring Board - Digital Section (2/2)

    STR-DG500/DG600 4-13. PRINTED WIRING BOARD — DIGITAL SECTION (2/2) — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. (Page 36) (Page 45) (Page 22) (Page JR1019 CNS508 IC1902 CNS509 IC1901 C1317 CNS503 R1252 R1260 IC1354 FB1502 C1914 R1251...
  • Page 28: Schematic Diagram - Digital Section (1/5)

    STR-DG500/DG600 4-14. SCHEMATIC DIAGRAM — DIGITAL SECTION (1/5) — • Refer to page 47 for Waveforms and page 48 for IC Block Diagrams. CNS508 JR1202 C1251 R1261 R1260 C1252 C1253 R1252 R1251 IC1071 IC1902 C1064 C1914 C1063 C1913 (Page 31) FB1302 IC1354 JR1019...
  • Page 29: Schematic Diagram - Digital Section (2/5)

    STR-DG500/DG600 4-15. SCHEMATIC DIAGRAM — DIGITAL SECTION (2/5) — • Refer to page 47 for Waveforms and page 54 for IC Pin Descriptions. (Page 28) C1520 (Page 31) FB1502 C1515 C1516 C1517 IC1502 C1518 FB1501 (Page 32) C1519 RB1501 RB1506 RB1504 C1514 RB1502...
  • Page 30: Schematic Diagram - Digital Section (3/5)

    STR-DG500/DG600 4-16. SCHEMATIC DIAGRAM — DIGITAL SECTION (3/5) — • Refer to page 50 for IC Block Diagrams. (Page 28) (Page 29) C1403 IC B/D C1404 IC1401 C1450 R1474 (Page 32) R1402 FB1452 C1460 C1494 R1407 R1401 C1409 R1403 IC1452 C1454 C1457 FB1453...
  • Page 31: Schematic Diagram - Digital Section (4/5)

    STR-DG500/DG600 4-17. SCHEMATIC DIAGRAM — DIGITAL SECTION (4/5) — • Refer to page 51 for IC Block Diagrams. C2218 IC B/D FB2034 C2216 R1016 CNS509 R1015 R1130 R1014 R1013 R1012 R1011 R1010 C1601 C1602 C2217 (Page 37) R1063 R1062 R1061 R1068 R1067 R1066...
  • Page 32: Schematic Diagram - Digital Section (5/5)

    STR-DG500/DG600 4-18. SCHEMATIC DIAGRAM — DIGITAL SECTION (5/5) — • Refer to page 47 for Waveforms and page 56 for IC Pin Descriptions. (Page 31) CNS505 (Page 28) R1187 FB1101 R1201 R1179 R1180 R1088 (Page 29) (Page 44) R1183 R1184 R1181 C1137 IC1111...
  • Page 33: Printed Wiring Boards - Center/Surround Back Speaker Section

    STR-DG500/DG600 4-19. PRINTED WIRING BOARDS — CENTER/SURROUND BACK SPEAKER SECTION — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. (Page 22) (Page 22) (Page 22) (Page 22) (Page 22) (Page 22) • Semiconductor Location (Page 22) Ref.
  • Page 34: Schematic Diagram - Center/Surround Back Speaker Section

    STR-DG500/DG600 4-20. SCHEMATIC DIAGRAM — CENTER/SURROUND BACK SPEAKER SECTION — • Refer to page 51 for IC Block Diagrams. IC B/D IC2501 CN2570 (Page 24) C2573 R2582 Q2577 R2571 (Page 24) C2578 R2577 Q2573 R2588 C2576 D2575 R2572 C2562 C2563 C2564 R2578 Q2575...
  • Page 35: Printed Wiring Board - Front B Speaker Section

    STR-DG500/DG600 4-21. PRINTED WIRING BOARD — FRONT B SPEAKER SECTION — 4-22. SCHEMATIC DIAGRAM — FRONT B SPEAKER SECTION — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. RY802 CNP807 RY803 (Page 46) RY801 CNP808 JW786 (Page 25) Q809...
  • Page 36: Printed Wiring Board - Video Section

    STR-DG500/DG600 4-23. PRINTED WIRING BOARD — VIDEO SECTION — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. J301 J200 J201 R220 R221 C200 R200 C207 C206 C208 C312 IC203 C310 C311 C313 C309 C308 R303 C209 (Page 38) C338...
  • Page 37: Schematic Diagram - Video Section

    STR-DG500/DG600 4-24. SCHEMATIC DIAGRAM — VIDEO SECTION — • Refer to page 51 for IC Block Diagrams. J298 IC807 CN201 CNP202 CNP203 R299 C220 C223 R219 JW200 C210 C209 C214 C221 JW300 C224 R298 (Page 25) (Page 23) C294 C293 R220 C201 J201...
  • Page 38: Printed Wiring Board - S-Video Section

    STR-DG500/DG600 4-25. PRINTED WIRING BOARD — S-VIDEO SECTION (DG600) — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. • Semiconductor Location Ref. No. Location D251 D252 D253 D254 IC251 IC252 IC253 Q250 Q251 (Page 36) 4-26.
  • Page 39: Printed Wiring Board - S-Video Up Convert Section (Dg600)

    STR-DG500/DG600 4-27. PRINTED WIRING BOARD — S-VIDEO UP CONVERT SECTION (DG600) — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. • Semiconductor Location Ref. No. Location IC370 IC372 IC375 Q371 Q372 Q373 (Page 36) 4-28. SCHEMATIC DIAGRAM — S-VIDEO UP CONVERT SECTION (DG600) — • Refer to page 47 for Waveform and page 52 for IC Block Diagrams. R366 Q373 R365...
  • Page 40: Printed Wiring Board - Xm Section (Dg600)

    STR-DG500/DG600 4-29. PRINTED WIRING BOARD — XM SECTION (DG600) — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. X101 D101 (Page 27) (Page 22) (Page 22) • Semiconductor Location Ref. No. Location D101 D103 (D104) E-12 IC101 IC102...
  • Page 41: Schematic Diagram - Xm Section (Dg600)

    STR-DG500/DG600 4-30. SCHEMATIC DIAGRAM — XM SECTION (DG600) — • Refer to page 47 for Waveform and page 53 for IC Block Diagrams. C109 C111 IC103 IC B/D CN101 R101 R102 R103 R152 R153 Q101 C104 C103 C105 C106 C107 R154 R155 R104...
  • Page 42: Printed Wiring Board - Adcc Section

    STR-DG500/DG600 4-31. PRINTED WIRING BOARD — ADCC SECTION — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. J2000 D2013 D2014 C2010 R2016 R2015 C2012 C2001 IC2000 (Page 22) C2006 R2005 C2018 R2017 4-32. SCHEMATIC DIAGRAM — ADCC SECTION — C2005 C2018 R2017...
  • Page 43: Printed Wiring Boards - Display Section

    STR-DG500/DG600 4-33. PRINTED WIRING BOARDS — DISPLAY SECTION — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. (Page 27) • Semiconductor Location Ref. No. Location D105 IC100 IC101 IC102 (IC200) Q110 ) : STR-DG600 STR-DG500/DG600...
  • Page 44: Schematic Diagram - Display Section

    STR-DG500/DG600 4-34. SCHEMATIC DIAGRAM — DISPLAY SECTION — C108 C109 R198 R199 FL101 CNS100 L103 C151 R122 C152 L101 C150 R121 C104 D105 C101 R123 R131 Q110 (Page 32) R118 R107 R106 R105 R104 R103 R102 R101 R115 IC100 S107 S106 S105 S124...
  • Page 45: Printed Wiring Boards - Power Section

    STR-DG500/DG600 4-35. PRINTED WIRING BOARDS — POWER SECTION — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. (Page 22) (Page 35) C924 • Semiconductor Location Ref. No. Location D901 D910 D911 D912 D913 D914 D915 D920 (Page 22) (Page 27)
  • Page 46: Schematic Diagram - Power Section

    STR-DG500/DG600 4-36. SCHEMATIC DIAGRAM — POWER SECTION — T901 (Page 35) (Page 25) CNP804 CNP910 CNP902 F901 CNP907 R810 F902 CNP906 S901 JW903 CNP801 D920 D923 C913 Q901 C915 R903 R902 D901 R811 C916 RY901 D921 D922 R904 J911 C914 (Page 25) JW905 D910...
  • Page 47 STR-DG500/DG600 • Waveforms — DIGITAL Board — IC1301 qd (CKOUT) IC1501 qs (MCLK2) 1.1 Vp-p 2.1 Vp-p 13.9 MHz 12.288 MHz 1V/DIV, 50nsec/DIV 1V/DIV, 50nsec/DIV IC1301 qf (BCK) IC1501 qf (SCKOUT) 2.4 Vp-p 2.5 Vp-p 3.07 MHz 12.288 MHz 1V/DIV, 0.2 µ s/DIV 1V/DIV, 50nsec/DIV IC1301 wa (XOUT) IC1101 id (X1)
  • Page 48 STR-DG500/DG600 • IC Block Diagrams IC501 µPC2581V-S (MAIN BOARD (2/3)) IC601 µPC2581V-S (MAIN BOARD (2/3)) IC701 µPC2581V-S (MAIN BOARD (2/3)) BIAS CIRCUIT PROTECTOR REG DRIVE DRIVE DRIVE DRIVE 2 3 4 5 6 8 9 10 11 12 13 14 15 IC1301 LC89056W-E (DIGITAL BOARD (1/5) (STR-DG500)) 12 11 10 9 8 7 6...
  • Page 49 STR-DG500/DG600 IC1301 LC890561W (DIGITAL BOARD (1/5) (STR-DG600)) 36 35 32 31 30 29 REGULATOR FS CALCULATION PA,PB DETECT 24 AUDIO C-BIT DETECT 23 EMPHA 22 XIN XSEL 21 XOUT 20 XMCK MODE0 DATA SELECTOR 19 DVDD MODE1 18 DGND DATA SELECTOR DGND 17 XSTATE 16 DATAO...
  • Page 50 STR-DG500/DG600 IC1401 PCM1800E/2K (DIGITAL BOARD (3/5)) 15 14 13 DIGITAL MODULATOR 1/64 SERIAL I/O DECIMATION INTERFACE FILTER & & MODE/FORMAT LOW-CUT CONTROL DIGITAL FILTER MODULATOR SINGLE-END SINGLE-END CLOCK/ DEFERENTIAL REFERENCE DEFERENTIAL TIMING CONTROL RESET/ CONVERTER CONVERTER POWER CONTROL IC1452 PCM1609APT (DIGITAL BOARD (3/5)) 36 35 34 33 VCC3 FUNCTION...
  • Page 51 STR-DG500/DG600 IC1601 SN74HC595ANSR (DIGITAL BOARD (4/5)) IC1602 SN74HC595ANSR (DIGITAL BOARD (4/5)) SHIFT REGISTER LATCH PARALLEL DATA OUTPUT IC2501 STK350-230 (SB AMP BOARD) (STR-DG600) DRIVER 7 8 9 IC203 NJM2595D (VIDEO BOARD) IC251 NJM2595D (SVIDEO BOARD) (STR-DG600) IC252 NJM2595D (SVIDEO BOARD) (STR-DG600) M.OUT 16 VCC 75Ω...
  • Page 52 STR-DG500/DG600 IC253 LA7213 (SVIDEO BOARD) (STR-DG600) SYNC V-SYNC IC370 TC90A69NG (S VIDEO UP CONVERT BOARD) (STR-DG600) PLL DET IIC BUS 8fsc 4fsc (8fsc) CORING V-ENHANCER CORING PED. DELAY CLIP PEAKING LINE LINE INTERPOLATION MEMORY MEMORY KILLER DYNAMIC COMB FILTER C-N.C SYNC CLAMP IC372 NJM2268D (S VIDEO UP CONVERT BOARD) (STR-DG600) 6.2dB...
  • Page 53 STR-DG500/DG600 IC102 F2602E-01-TR (XM BOARD) (STR-DG600) HIGH SPEED I2S_DATA 24 VSS DATA PORT 23 COMM_TX_P (HSDP) I2S_SCLK 22 COMM_TX_M 21 VSS I2S_LRCLK 20 VDD 19 COMM_RX_M I2S_OCLK 18 COMM_RX_P COMM ENGINE 17 VDD 16 VSS SAII_CLK COMM_TX_EN SAII_DATA COMM_TX_DIG SAII_EN COMM_RX_DIG SYSTEM CONTROL(CBM) BUS I/F IC103 TC74VHC541FT(EL) (XM BOARD) (STR-DG600)
  • Page 54 STR-DG500/DG600 • IC Pin Descriptions IC1501 CXD9718BQ (DSP) (DIGITAL BOARD (2/5)) Pin No. Pin Name Pin Description — Ground XRST Reset signal input from SYSTEM CONTROL IC EXTIN Not used (Connect to ground) LRCKI3 Not used (Connect to ground) VDDI Power supply pin (+2.6 V) BCKI3 Not used (Connect to ground)
  • Page 55 STR-DG500/DG600 Pin No. Pin Name Pin Description MOD1 Operation mode signal input (L: 386fs, H: 256fs) (Fixed at H) MOD0 Operation mode signal input (L: single chip mode, H: use prohibited) (Fixed at L) EXLOCK Error detection signal input from DIR IC VDDI Power supply pin (+2.6 V) —...
  • Page 56 STR-DG500/DG600 IC1101 MB90488BPF-G-175E1 (SYSTEM CONTROL) (DIGITAL BOARD (5/5)) (STR-DG500) IC1101 MB90488BPF-G-178E1 (SYSTEM CONTROL) (DIGITAL BOARD (5/5)) (STR-DG600) Pin No. Pin Name Pin Description DATAO Serial data line signal input from DIR IC GP9 signal input from DSP IC Boot stop control signal output for DSP IC Chip select signal output for DSP IC HACN Acknowledge signal input from DSP IC...
  • Page 57 STR-DG500/DG600 Pin No. Pin Name Pin Description RDS data clock signal input (AEP, UK model)/XM digital power control signal output RDS_CLK/XMDPOWER (STR-DG600) RDS_DATA/ RDS data input (AEP, UK model)/XM command control signal output (STR-DG600) XM_COMMAND SIRCS SIRCS signal input HP_DETECT Headphones detection signal input POWER_KEY Power key detection signal input...
  • Page 58: Exploded Views

    STR-DG500/DG600 SECTION 5 EXPLODED VIEWS NOTE: • The mechanical parts with no reference • -XX and -X mean standardized parts, so The components identified by mark 0 or dotted line with mark number in the exploded views are not supplied. they may have some difference from the 0 are critical for safety.
  • Page 59: Front Panel Section

    STR-DG500/DG600 5-2. FRONT PANEL SECTION not supplied not supplied (POWER board) (ADCC board) not supplied (HEADPHONE board) FL101 not supplied (VIDEO3 board) not supplied (OPT3 board) (DG600) supplied with RV101,103 supplied with RV102 Ref. No. Part No. Description Remark Ref. No. Part No.
  • Page 60: Back Panel Section

    STR-DG500/DG600 5-3. BACK PANEL SECTION not supplied not supplied (AC SELECT board) (E2 model) not supplied (SPEAKER C/SB board) not supplied (VIDEO board) not supplied (SVIDEO board) (DG600) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 106 A-1157-412-A S VIDEO UP CONVERT BOARD, COMPLETE 1-827-295-22 CORD, POWER (AUS)
  • Page 61: Chassis Section

    STR-DG500/DG600 5-4. CHASSIS SECTION not supplied (SB AMP board) not supplied (STANDBY board) (DG600) Q2573 F902 Q2572 not supplied F901 (SPEAKER B board) Q2574 Q654 Q604 Q753 Q653 Q703 Q503 Q603 Q534 Q754 Q704 Q504 T901 Q533 not supplied not supplied not supplied Ref.
  • Page 62: Electrical Parts List

    STR-DG500/DG600 SECTION 6 AC SELECT ADCC DIGITAL ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in • SEMICONDUCTORS The components identified by mark 0 or dotted line with mark the parts list may be different from the In each case, u : µ, for example: 0 are critical for safety.
  • Page 63 STR-DG500/DG600 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1103 1-126-947-11 ELECT 47uF C1316 1-100-566-11 CERAMIC CHIP 0.1uF C1104 1-216-864-11 SHORT CHIP (DG600) C1105 1-216-864-11 SHORT CHIP C1317 1-126-925-11 ELECT 470uF C1107 1-100-566-11 CERAMIC CHIP 0.1uF (DG600) C1108...
  • Page 64 STR-DG500/DG600 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1501 1-100-566-11 CERAMIC CHIP 0.1uF < DIODE > C1502 1-100-566-11 CERAMIC CHIP 0.1uF C1503 1-100-566-11 CERAMIC CHIP 0.1uF D1001 8-719-053-18 DIODE 1SR154-400TE-25 C1504 1-100-566-11 CERAMIC CHIP 0.1uF D1003 8-719-049-09 DIODE 1SS367-T3SONY...
  • Page 65 STR-DG500/DG600 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC1502 6-709-278-01 IC IS61WV6416BLL-12TLI R1065 1-216-809-11 METAL CHIP 1/10W IC1503 8-759-546-74 IC TC7WH157FU(TE12R) R1066 1-216-809-11 METAL CHIP 1/10W IC1601 8-759-268-29 IC SN74HC595ANS R1067 1-216-809-11 METAL CHIP 1/10W IC1602 8-759-268-29 IC SN74HC595ANS...
  • Page 66 STR-DG500/DG600 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1150 1-216-809-11 METAL CHIP 1/10W R1304 1-216-809-11 METAL CHIP 1/10W R1151 1-216-809-11 METAL CHIP 1/10W (DG500) R1152 1-216-809-11 METAL CHIP 1/10W R1304 1-216-813-11 METAL CHIP 1/10W R1153 1-216-809-11 METAL CHIP 1/10W...
  • Page 67: Digital Display

    STR-DG500/DG600 DIGITAL DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1455 1-216-864-11 SHORT CHIP R1804 1-216-809-11 METAL CHIP 1/10W R1456 1-216-821-11 METAL CHIP 1/10W (DG600) (DG600) R1805 1-216-809-11 METAL CHIP 1/10W R1460 1-216-864-11 SHORT CHIP (DG600) R1461 1-216-864-11 SHORT CHIP...
  • Page 68 STR-DG500/DG600 DISPLAY HEADPHONE MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C144 1-127-888-11 CERAMIC 0.1uF RV103 1-418-817-11 ENCODER, ROTARY (TUNING +/–) (DG600) C145 1-127-888-11 CERAMIC 0.1uF C146 1-126-795-11 ELECT 10uF < SWITCH > C147 1-162-286-31 CERAMIC 220PF C148 1-162-286-31 CERAMIC...
  • Page 69 STR-DG500/DG600 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C463 1-162-286-31 CERAMIC 220PF C654 1-107-583-11 CERAMIC 0.25PF 500V C464 1-127-888-11 CERAMIC 0.1uF C655 1-102-233-00 CERAMIC 33PF 500V C468 1-162-282-31 CERAMIC 100PF C656 1-162-282-31 CERAMIC 100PF C469 1-162-282-31 CERAMIC 100PF...
  • Page 70 STR-DG500/DG600 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C811 1-127-888-11 CERAMIC 0.1uF CNP503 1-779-978-11 PIN, CONNECTOR 3P C822 1-126-947-11 ELECT 47uF * CNP801 1-564-104-00 PIN, CONNECTOR (3.96mm PITCH) 3P C830 1-127-888-11 CERAMIC 0.1uF CNP802 1-691-767-11 PLUG (MICRO CONNECTOR) 5P C831 1-127-888-11 CERAMIC 0.1uF...
  • Page 71 STR-DG500/DG600 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark J400 1-774-411-11 JACK, PIN 6P (MD/TAPE OUT,SA-CD/CD IN, Q793 8-729-119-78 TRANSISTOR 2SC2785-HFE AUX IN) (DG600) Q795 8-729-042-09 TRANSISTOR 2SA1038S-RSE-TP J401 1-793-775-12 JACK, PIN 6P (MULTI CH IN Q801 8-729-140-97 TRANSISTOR 2SB734-34 CENTER,SUB WOOFER,SURROUND,FRONT)
  • Page 72 STR-DG500/DG600 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R520 1-247-847-11 CARBON 4.7K 1/4W R620 1-247-847-11 CARBON 4.7K 1/4W R521 1-240-855-81 CARBON 6.2K 1/4W F R621 1-240-855-81 CARBON 6.2K 1/4W F R522 1-249-419-11 CARBON 1.5K 1/4W R622 1-249-419-11 CARBON...
  • Page 73 STR-DG500/DG600 MAIN OPT3 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R700 1-249-429-11 CARBON 1/4W R763 1-249-414-11 CARBON 1/4W R701 1-247-831-11 CARBON 1/4W R764 1-249-399-11 CARBON 1/4W F R702 1-249-439-11 CARBON 1/4W R765 1-249-399-11 CARBON 1/4W F R703 1-249-421-11 CARBON 2.2K...
  • Page 74 STR-DG500/DG600 OPT3 POWER S VIDEO UP CONVERT Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < RESISTOR > C393 1-162-203-31 CERAMIC 15PF C394 1-126-961-11 ELECT 2.2uF R290 1-247-807-31 CARBON 1/4W C395 1-127-876-11 CERAMIC 0.01uF C396 1-126-963-11 ELECT 4.7uF ************************************************************* C397...
  • Page 75 STR-DG500/DG600 S VIDEO UP CONVERT SB AMP SPEAKER B Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R387 1-249-429-11 CARBON 1/4W R2577 1-247-847-11 CARBON 4.7K 1/4W R388 1-249-412-11 CARBON 1/4W R2578 1-234-182-11 ENCAPSULATED COMPONENT 0.22X2 5W R389 1-249-412-11 CARBON 1/4W...
  • Page 76 STR-DG500/DG600 SPEAKER B SPEAKER C/SB STANDBY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < TERMINAL BOARD > TM502 1-780-217-11 TERMINAL BOARD (2P) (SPEAKERS CENTER) (DG600) TM600 1-780-215-11 TERMINAL BOARD (4P) (SPEAKERS FRONT B) ************************************************************* (DG600) TM602 1-537-240-11 TERMINAL BOARD (CHECKER PIN) (4P) STANDBY BOARD...
  • Page 77 STR-DG500/DG600 STANDBY SVIDEO VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R904 1-249-381-11 CARBON 1/4W F J252 1-794-937-11 CONNECTOR (DIN) 2P (DVD S-VIDEO IN, R921 1-247-871-11 CARBON 1/4W VIDEO 2 S-VIDEO IN) R922 1-247-863-11 CARBON 1/4W J253 1-794-937-11 CONNECTOR (DIN) 2P (VIDEO 1...
  • Page 78 STR-DG500/DG600 VIDEO VIDEO3 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C331 1-127-888-11 CERAMIC 0.1uF < CONNECTOR > C338 1-126-947-11 ELECT 47uF CN201 1-784-922-11 PIN, CONNECTOR 5P < CONNECTOR > < JACK > CNP202 1-564-705-11 PIN, CONNECTOR (SMALL TYPE) 3P CNP203 1-691-765-11 PLUG (MICRO CONNECTOR) 3P J298 1-819-187-11 JACK, PIN 3P (VIDEO 3 IN/PORTABLE AV IN...
  • Page 79 STR-DG500/DG600 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C136 1-107-826-11 CERAMIC CHIP 0.1uF L102 1-216-295-11 SHORT CHIP C137 1-126-964-11 ELECT 10uF C138 1-107-826-11 CERAMIC CHIP 0.1uF < TRANSISTOR > C139 1-126-964-11 ELECT 10uF C140 1-107-826-11 CERAMIC CHIP 0.1uF Q101 8-729-027-23 TRANSISTOR DTA114EKA-T146...
  • Page 80 STR-DG500/DG600 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R167 1-216-864-11 SHORT CHIP ACCESSORIES R168 1-107-826-11 CERAMIC CHIP 0.1uF ************ R169 1-107-826-11 CERAMIC CHIP 0.1uF R172 1-216-864-11 SHORT CHIP 1-468-981-11 REMOTE COMMANDER (RM-AAP012) R173 1-216-864-11 SHORT CHIP (including BATTERY LID) (DG600) 1-479-691-11 STANDARD COMMANDER (RM-AAU005) <...
  • Page 81 STR-DG500/DG600 MEMO...
  • Page 82 STR-DG500/DG600 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2006. 02...

This manual is also suitable for:

Str-dg500Str-dg600

Table of Contents