hit counter script
HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Maintenance And Service Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Laptop
  5. 2530p - EliteBook - Core 2 Duo 2.13 GHz
  6. Maintenance and service manual

HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Maintenance And Service Manual

Hp elitebook 2530p notebook pc - maintenance and service guide
Hide thumbs Also See for 2530p - EliteBook - Core 2 Duo 2.13 GHz:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Setup Manual
HP EliteBook 2530p Notebook PC
Maintenance and Service Guide

Advertisement

Table of Contents
loading

Related Manuals for HP 2530p - EliteBook - Core 2 Duo 2.13 GHz

Summary of Contents for HP 2530p - EliteBook - Core 2 Duo 2.13 GHz

  • Page 1 HP EliteBook 2530p Notebook PC Maintenance and Service Guide...
  • Page 2 © Copyright 2008 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel and Core are trademarks of Intel Corporation in the U.S. and other countries. Java is a US trademark of Sun Microsystems, Inc.
  • Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 4 Safety warning notice...

  • Page 5: Table Of Contents

    Table of contents 1 Product description ............................1 2 External component identification ........................ 5 Top components ........................... 5 Pointing devices ........................5 Lights ........................... 6 Buttons, switches, and fingerprint reader ................8 Keys ........................... 10 Display ..........................11 Front components ..........................12 Rear components ..........................
  • Page 6 Electrostatic discharge damage ................ 39 Packaging and transporting guidelines ..........40 Workstation guidelines ..............40 Equipment guidelines ............... 41 Unknown user password ....................42 Component replacement procedures ....................43 Service tag ......................... 44 Computer feet ........................45 Battery ..........................46 SIM ............................
  • Page 7 6 Specifications .............................. 105 Computer specifications ........................105 12.1-inch, WXGA display specifications ................... 106 Hard drive specifications ........................107 DVD-ROM Drive specifications ......................108 DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive specifications ........ 109 System DMA specifications ......................110 System interrupt specifications ......................111 System I/O address specifications ....................
  • Page 8 RJ-45 (network) ..........................144 Universal Serial Bus ......................... 145 10 Power cord set requirements ........................146 Requirements for all countries and regions ..................146 Requirements for specific countries and regions ................147 11 Recycling ..............................148 Battery .............................. 148 Display .............................. 149 Index .................................

  • Page 9: Product Description

    Product description Category Description Product Name HP EliteBook 2530p Notebook PC Processors Intel® LV Core™2 Duo, soldered uFBGA ● SL9600 2.13-GHz, 1066MHZ front side bus (FSB) with 6-MB cache ● SL9400 1.86-GHz, 1066MHz FSB with 6-MB cache ● SL9300 1.6-GHz, 1066MHz FSB with 6-MB cache Intel ULV Core2 Duo, soldered uFBGA ●...
  • Page 10 Category Description Hard drives Customer-accessible Supports the following SATA primary drives: NOTE: The 4.57-cm (1.80-inch) primary hard drive must be installed in the hard drive bay. Installation of this drive in the optical drive bay is not supported. ● 160-GB, 5400-rpm ●...
  • Page 11 Category Description S4/S5 wake on LAN on AC power NIC power-down technology Wireless LAN Integrated WLAN options by way of mini-slot which supports WLAN only: Support for 2 dual-band 2.4-/5.0-GHz WLAN antennae cabled to mini-slot Support for the following WLAN options: ●...
  • Page 12 Category Description Spill-resistant keyboard Windows Vista® Start button Durable key caps Power requirements 65-W Smart AC adapter with localized cable plug support (3-wire plug with ground pin) 9-cell, 83.0-Wh Li-ion battery with fuel gauge 6-cell, 55.0-Wh Li-ion battery with fuel gauge 3-cell, 31.0-Wh Li-ion battery Security Supports Kensington security lock...

  • Page 13: External Component Identification

    External component identification Top components Pointing devices Component Description Left TouchPad button* Functions like the left button on an external mouse. TouchPad* Moves the pointer and selects or activates items on the screen. Left pointing stick button* Functions like the left button on an external mouse. Pointing stick* Moves the pointer and selects or activates items on the screen.

  • Page 14: Lights

    Lights Component Description ● Power lights (2)* On: The computer is on. ● Blinking: The computer is in the Sleep state (Windows Vista) or Standby (Windows XP). ● Off: The computer is off or in Hibernation. ● Wireless lights (2)† Blue: An integrated wireless device, such as a wireless local area network (WLAN) device, the HP Mobile Broadband Module, and/or a Bluetooth device, is on.
  • Page 15 Component Description ● Battery light Amber: A battery is charging. ● Turquoise: A battery is close to full charge capacity. ● Blinking amber: A battery that is the only available power source has reached a low battery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly.

  • Page 16: Buttons, Switches, And Fingerprint Reader

    Buttons, switches, and fingerprint reader Component Description ● Power button When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button to shut down the computer. ● When the computer is in the Sleep state (Windows Vista) or Standby (Windows XP), press the button briefly to exit the Sleep state or Standby.
  • Page 17 Component Description Presentation button Starts the presentation feature. TouchPad on/off button Turns the TouchPad on or off. Volume mute button Mutes and restores speaker sound. Volume scroll zone Adjusts speaker volume. Slide your finger to the left to decrease volume and to the right to increase volume. You can also press and hold the minus (–) sign to decrease volume, or press and hold the plus (+) sign to increase volume.

  • Page 18: Keys

    Keys Component Description Displays system information when pressed in combination with key. Executes frequently used system functions when pressed in combination with a function key or the key. Windows logo key Displays the Windows Start menu. Windows applications key Displays a shortcut menu for items beneath the pointer. Embedded numeric keypad keys Can be used like the keys on an external numeric keypad.

  • Page 19: Display

    Display Component Description Ambient light sensor Automatically adjusts the display brightness based on the lighting conditions in your environment. Webcam light (select models only) On: The integrated camera is in use. Webcam (select models only) Records audio and video and captures still photographs. Keyboard light Illuminates the keyboard in low-light conditions when the keyboard light button is pressed.

  • Page 20: Front Components

    Front components Component Description ● Wireless light Blue: An integrated wireless device, such as a wireless local area network (WLAN) device, the HP Mobile Broadband Module, and/or a Bluetooth device, is on. ● Amber: All wireless devices are off. ● Power light On: The computer is on.

  • Page 21: Rear Components

    Rear components Component Description RJ-45 (network) jack Connects a network cable. Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Rear components...

  • Page 22: Right-Side Components

    Right-side components NOTE: Refer to the illustration that most closely matches your computer. Component Description ExpressCard slot Supports optional ExpressCards. SD Card Reader Supports the Secure Digital (SD) Memory Card and MultiMediaCard (MMC) optional digital card formats. 1394 port Connects an optional IEEE 1394 or 1394a device, such as a camcorder.

  • Page 23: Left-Side Components

    Left-side components NOTE: Refer to the illustration that most closely matches your computer. Component Description Power connector Connects an AC adapter. RJ-11 (modem) jack Connects a modem cable. Powered USB port Provides power to an external device if used with a powered USB cable.

  • Page 24: Bottom Components

    Bottom components Component Description Battery release latches (2) Release the battery from the battery bay. Battery bay Holds the battery. SIM slot (select models only) Contains a wireless subscriber identity module (SIM). The SIM slot is located inside the battery bay. Broadband wireless module compartment Contains an HP Mobile Broadband Module (select models only).
  • Page 25 Component Description Speaker Produces sound. Memory module compartment Contains an expansion memory module slot and a WLAN module (select models only). NOTE: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region.

  • Page 26: Wireless Antennae (Select Models Only)

    Wireless antennae (select models only) Component Description WLAN antennae (2)* Send and receive wireless signals to communicate with wireless local area networks (WLAN). WWAN antennae (2)* Send and receive wireless signals to communicate with wireless wide-area networks (WWAN). *The antennae are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennae free from obstructions.

  • Page 27: Illustrated Parts Catalog

    Illustrated parts catalog Serial number location The service tag, affixed to the bottom of the computer, provides information that may be needed when troubleshooting system problems. The service tag provides the following information: (1) Product name: This is the product name affixed to the front of the computer. (2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product.
  • Page 28 Chapter 3 Illustrated parts catalog...

  • Page 29: Computer Major Components

    Computer major components Item Description Spare part number 12.1-inch, WXGA AntiGlare display assembly (See Display components on page 27 for display assembly component spare part number information.) Computer major components...
  • Page 30 Item Description Spare part number With webcam 492576-001 Without webcam 492575-001 Switch cover (includes display lid switch board and cable and LED board and cable) 492556-001 Keyboard with pointing stick (includes keyboard cable and pointing stick cable) ● For use in Brazil 506677-201 ●...
  • Page 31 Item Description Spare part number Memory modules (2, PC2-6400, 800-MHz, DDR2) 4-GB 492572-001 2-GB 492571-001 1-GB 492570-001 Top cover (includes TouchPad board and cable, TouchPad button board and cable, and TouchPad bracket) With fingerprint reader 492557-001 Without fingerprint reader 514059-001 Speaker 481109-001 ExpressCard assembly...
  • Page 32 Item Description Spare part number DVD-ROM Drive 492558-001 (16) Base enclosure (includes display latch switch, battery release latch, and rubber feet) 492547-001 (17) Hard drives (2, include bezel and bracket) Primary hard drive NOTE: The 4.57-cm (1.80-inch) primary hard drive must be installed in the hard drive bay. Installation of this drive in the optical drive bay is not supported.
  • Page 33 Item Description Spare part number ● Broadcom 4322AGN WiFi Adapter for use in Afghanistan, Albania, Algeria, Andorra, 487330-002 Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark,...
  • Page 34 Item Description Spare part number ● Broadcom 4312G WiFi Adapter for use in Afghanistan, Albania, Algeria, Andorra, 459263-002 Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark,...

  • Page 35: Display Components

    Display components Item Description Spare part number Display bezel (includes HP logo and computer model number label) For use with models that include a webcam 495022-001 For use with models that do not include a webcam 495019-001 Display bezel adhesive (not illustrated) 497013-001 Display Hinge Kit (includes left and right hinges and brackets) 481098-001...
  • Page 36 Item Description Spare part number With webcam 496490-001 Without webcam 495020-001 Chapter 3 Illustrated parts catalog...

  • Page 37: Mass Storage

    Mass storage Item Description Spare part number Primary hard drive NOTE: The 4.57-cm (1.80-inch) primary hard drive must be installed in the hard drive bay. Installation of this drive in the optical drive bay is not supported. 160-GB, 5400-rpm hard drive 503732-001 120-GB, 5400-rpm hard drive 492560-001...
  • Page 38 Item Description Spare part number Secondary hard drive system connector board (required for installation of secondary hard 495028-001 drive) Optical drive DVD-ROM Drive 492558-001 DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive 492559-001 Chapter 3 Illustrated parts catalog...

  • Page 39: Plastics Kit

    Plastics Kit Item Description Spare part number Plastics Kit: 492577-001 ExpressCard slot insert Bluetooth module compartment cover (includes one captive screw, secured by a C-clip) Broadband wireless module compartment cover (includes one captive screw, secured by a C-clip) Hard drive bay cover (includes 2 captive screws, secured by C-clips) NOTE: The 4.57-cm (1.80-inch) primary hard drive must be installed in the hard drive bay.

  • Page 40: Miscellaneous Parts

    Miscellaneous parts Description Spare part number 65-W Smart AC Adapter 463958-001 Cable Kit, includes Bluetooth, LED, and modem cables 492555-001 Optical drive bay insert assembly, includes additional USB port 498455-001 Power cord 490371-001 Rubber Kit (includes all rubber/mylar computer components) 492578-001 Screw Kit 492579-001...

  • Page 41: Sequential Part Number Listing

    Sequential part number listing Spare part Description number 459263-001 Broadcom 4312G WiFi Adapter (802.11b/g WLAN module) for use in the United States and Canada 459263-002 Broadcom 4312G WiFi Adapter (802.11b/g WLAN module) for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia,...
  • Page 42 Spare part Description number 487330-002 Broadcom 4322AGN WiFi Adapter (802.11a/b/g/n WLAN module) for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,...
  • Page 43 Spare part Description number 492568-001 492570-001 1-GB, PC2-6400, 800-MHz, DDR2 memory module 492571-001 2-GB, PC2-6400, 800-MHz, DDR2 memory module 492572-001 4-GB, PC2-6400, 800-MHz, DDR2 memory module 492573-001 Microphone 492574-001 6.35-cm (2.50-inch) secondary hard drive cage assembly (includes additional USB port) 492575-001 12.1-inch, WXGA AntiGlare display assembly (without webcam) 492576-001...
  • Page 44 Spare part Description number 506677-071 Keyboard with pointing stick for use in Spain 506677-081 Keyboard with pointing stick for use in Denmark 506677-091 Keyboard with pointing stick for use in Norway 506677-111 Keyboard with pointing stick for use in Switzerland 506677-121 Keyboard with pointing stick for use in French Canada 506677-131...

  • Page 45: Removal And Replacement Procedures

    Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Flat-bladed screwdriver ● Magnetic screwdriver ● Phillips P0 and P1 screwdrivers ● Torx T8 screwdriver Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures.

  • Page 46: Cables And Connectors

    Cables and connectors CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer. Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the cables during removal and insertion.

  • Page 47: Grounding Guidelines

    Grounding guidelines Electrostatic discharge damage Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD contains enough power to alter device parameters or melt silicon junctions.

  • Page 48: Packaging And Transporting Guidelines

    Packaging and transporting guidelines Follow these grounding guidelines when packaging and transporting equipment: ● To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging. ● Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.

  • Page 49: Equipment Guidelines

    Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times.

  • Page 50: Unknown User Password

    Unknown user password If the computer you are servicing has an unknown user password, follow these steps to clear the password: NOTE: These steps also clear CMOS. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 51: Component Replacement Procedures

    Component replacement procedures This chapter provides removal and replacement procedures. There are as many as 60 screws, in 9 different sizes, that must be removed, replaced, or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement.

  • Page 52: Service Tag

    Service tag The service tag, affixed to the bottom of the computer, provides information that may be needed when troubleshooting system problems. The service tag provides the following information: (1) Product name: This is the product name affixed to the front of the computer. (2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product.

  • Page 53: Computer Feet

    Computer feet The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare part number 492578-001. There are 4 rubber feet that attach to the base enclosure in the locations illustrated below. Component replacement procedures...

  • Page 54: Battery

    Battery Description Spare part number 9-cell, 83.0-Wh Li-ion battery 492550-001 6-cell, 55.0-Wh Li-ion battery 492549-001 3-cell, 31.0-Wh Li-ion battery 492548-001 Before disassembling the computer, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 55: Sim

    NOTE: This section applies only to computer models with WWAN capability. NOTE: If there is a SIM inserted in the SIM slot, it must be removed before disassembling the computer. Be sure that the SIM is reinserted in the SIM slot after reassembling the computer. Before removing the SIM, follow these steps: Shut down the computer.

  • Page 56: Bluetooth Module

    Bluetooth module Description Spare part number Bluetooth module 483113-001 Before removing the Bluetooth module, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.
  • Page 57 Remove the Bluetooth module (3). Reverse the above procedure to install the Bluetooth module. Component replacement procedures...

  • Page 58: Expansion Memory Module

    Expansion memory module Description Spare part number Memory modules (PC2-6400, 800-MHz, DDR2) 4-GB 492572-001 2-GB 492571-001 1-GB 492570-001 Before removing the memory module, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 59 Remove the memory module (2) by pulling the module away from the slot at an angle. NOTE: The memory module is designed with a notch (3) to prevent incorrect insertion into the memory module slot. Reverse this procedure to install the memory module. Component replacement procedures...

  • Page 60: Wlan Module

    WLAN module Description Spare part number ● Intel WiFi Link 5100ABGN (802.11a/b/g/n WLAN module): For use in Antigua & Barbuda, 480985-001 Argentina, Aruba, the Bahamas, Barbados, Bermuda, Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, Uruguay, the United States, Venezuela, and Vietnam ●...
  • Page 61 Description Spare part number ● Broadcom 4312G WiFi Adapter (802.11b/g WLAN module): For use in Afghanistan, Albania, 459263-002 Algeria, Andorra, Angola, Antigua & Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia & Herzegovina Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor,...
  • Page 62 Lift the front edge of the memory module compartment cover (2), swing it back, and remove the cover (3). The memory module compartment cover is included in the Plastics Kit, spare part number 492577-001. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE: The black WLAN antenna cable is connected to the WLAN module “Main”...

  • Page 63: Primary Hard Drive

    Primary hard drive NOTE: The 4.57-cm (1.80-inch) primary hard drive must be installed in the hard drive bay. Installation of this drive in the optical drive bay is not supported. NOTE: All primary hard drive spare part kits include a hard drive bracket. Description Spare part number 160-GB, 5400-rpm hard drive...
  • Page 64 Loosen the 2 Phillips 2.0×6.0 captive screws (1) that secure the hard drive bracket, and remove the hard drive bracket (2). Remove the Phillips screw that secures the connector board to the base enclosure(3). Tilt the primary hard drive up toward you (1) to disengage it from the compartment. Grasp the edges of the connector board, and disconnect the hard drive (2) from the connector board.
  • Page 65 Pull the edges of the protective rubber gasket out and away from the hard drive (1), and remove the gasket (2). If it is necessary to replace the primary hard drive connector board, release the ZIF connectors (1) to which the primary hard drive connector board cable is attached, and disconnect the cable (2).

  • Page 66: Wwan Module

    WWAN module Description Spare part number HP un2400 Mobile Broadband Module 483377-002 CAUTION: The WWAN module and the WLAN module are not interchangeable. CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region.
  • Page 67 Remove the two Phillips PM2.0×4.0 screws that secure the module to the computer (2). Remove the WWAN module (3) by pulling the module away from the slot at an angle. NOTE: WWAN modules are designed with a notch (4) to prevent incorrect insertion. Reverse this procedure to install the WWAN module.

  • Page 68: Optical Drive

    Optical drive Description Spare part number Optical drives DVD-ROM Drive 492558-001 DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive 492559-001 Before removing the optical drive, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 69 Remove the optical drive bracket (2). Reverse this procedure to reassemble and install an optical drive. Component replacement procedures...

  • Page 70: Switch Cover And Keyboard

    Switch cover and keyboard Description Spare part number Switch cover (includes display lid switch board and cable) 492556-001 Keyboard with pointing stick (includes keyboard cable and pointing stick cable) ● For use in Brazil 506677-201 ● For use in the Czech Republic 506677-221 ●...
  • Page 71 Before removing the switch cover and keyboard, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
  • Page 72 Release the switch cover (1) by sliding it to the right, and then lifting it (2) as far as the LED board cable and the power button board cable allow. Lift the rear edge of the keyboard and swing it up and forward until it rests upside down on the palm rest.
  • Page 73 Release the ZIF connector (3) to which the pointing stick cable is attached, and disconnect the pointing stick cable (4) from the system board. Remove the keyboard. Disconnect the LED board cable (1) and the power button board cable (2) from the system board.

  • Page 74: Rtc Battery

    RTC battery NOTE: Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all passwords and CMOS settings to be cleared. Description Spare part number RTC battery 481089-001 Before removing the RTC battery, follow these steps: Shut down the computer.

  • Page 75: Secondary Hard Drive

    Secondary hard drive NOTE: The 6.35-cm (2.50-inch) secondary hard drive must be installed in the optical drive bay. Installation of this drive in the hard drive bay is not supported. (This option is not available when the optical drive is installed.) Description Spare part number 320-GB, 7200-rpm hard drive...
  • Page 76 Remove the 5 Mylar screw covers (1), the 4 Phillips screws (2), and the 2 Phillips PM2.0×6.0 screws (3) that secure the secondary hard drive cradle assembly to the computer. Turn the computer right-side up, and open the display as far as possible. Disconnect the secondary hard drive cradle assembly USB cable from the system board.
  • Page 77 Remove the secondary hard drive cradle assembly (3) from the optical drive bay. Remove the four Phillips PM3.0×4.0 secondary hard drive screws that secure the secondary hard drive to the cradle assembly. Tilt the hard drive up and away from the connector board (1), and disconnect the hard drive from the connector board (2).
  • Page 78 Remove the hard drive from the cradle assembly (3). If it is necessary to replace the secondary hard drive connector board, remove the two Phillips screws that secure the connector board to the cradle assembly (1). Remove the secondary hard drive connector board (2). If it is necessary to replace the secondary hard drive system connector board, remove the two Phillips screws that secure the connector board to the cradle assembly (1).
  • Page 79 Remove the secondary hard drive system connector board (4). Reverse the above procedure to reassemble and install the secondary hard drive. Component replacement procedures...

  • Page 80: Primary Memory Module

    Primary memory module Description Spare part number Memory modules (PC2-6400, 800-MHz, DDR2) 4-GB 492572-001 2-GB 492571-001 1-GB 492570-001 Before removing the primary memory module, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 81: Display Assembly

    Display assembly Description Spare part number 12.1-inch, WXGA AntiGlare display assembly With a webcam 492576-001 Without a webcam 492575-001 Display bezel (includes HP logo and computer model number label) For use with models that include a webcam 495022-001 For use with models that do not include a webcam 495019-001 Display bezel adhesive 497013-001...
  • Page 82 Disconnect the wireless antenna cables from the WWAN module (3), and feed them down through the hole (4). Turn the computer right side up, and open the display . Thread the WLAN (1) and WWAN (2) cables out through the top cover, and release the cables from the top cover clips (3).
  • Page 83 Remove the two Mylar screw covers (1) and the four Torx T8M2.0×6.0 screws (2) that secure the display assembly to the computer. Turn the computer right-side up, with the front toward you. Open the computer. CAUTION: The display assembly will be unsupported when the following screws are removed. To prevent damage to the display assembly, support it before removing the screws.
  • Page 84 If it is necessary to replace the display bezel, remove the four rubber screw covers (1) and the four Torx T8M2.5×6.0 screws (2) that secure the display bezel to the display assembly. NOTE: The rubber screw covers on the display bezel top edge are thicker than the rubber screw covers on the display bezel bottom edge.
  • Page 85 Remove the display panel (3). Remove the two Phillips PM2.0×4.0 screws (1) that secure each display hinge to the display panel. Remove the display hinges (2). If it is necessary to replace the display panel cable, turn the display panel upside down, with the display panel bottom edge toward you.
  • Page 86 Remove the display panel cable (3). If it is necessary to replace the microphones (1), remove the microphones from the display enclosure (2). Reverse this procedure to reassemble and install the display assembly. Chapter 4 Removal and replacement procedures...

  • Page 87: Top Cover

    Top cover Description Spare part number Top cover (includes TouchPad board and cable, TouchPad button board and cable, and TouchPad bracket) With fingerprint reader 492557-001 Without fingerprint reader 514059-001 Before removing the top cover, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 88 Remove the following screw covers and screws: (1) Four rubber screw covers. The rubber screw covers are included in the Rubber Kit, spare part number 481106-001. (2) Six Torx T8M2.5×6.0 screws. (3) One Phillips PM2.0×5.0 screw. (4) One Torx T8M2.0×5.0 screw. Turn the computer right-side up, with the front toward you.
  • Page 89 Lift the rear edge of the top cover (1) and swing it up and forward until it rests at an angle. Lift the front edge of the top cover (2) until it disengages from the base enclosure. Remove the top cover. Reverse this procedure to install the top cover.

  • Page 90: Led Board

    LED board Description Spare part number LED board (includes cable and Mylar cover) 499209-001 Before removing the LED board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.
  • Page 91 Release the LED board (3) from the clips built into the base enclosure. Remove the LED board and cable. Reverse the above procedure to install the LED board. Component replacement procedures...

  • Page 92: Speaker

    Speaker Description Spare part number Speaker 481109-001 Before removing the speaker, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 93: Bluetooth Module Cable

    Bluetooth module cable NOTE: The Bluetooth module cable is included in the Cable Kit, spare part number 492555-001. Before removing the system board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 94: System Board

    System board Description Spare part number System board (includes processor, replacement thermal material, and replacement thermal material cleaning kit) With LV SL9600 processor 513947-001 With LV SL9400 processor 492552-001 With LV SL9300 processor 492551-001 With ULV SU9400 processor 513946-001 With ULV SU9300 processor 492553-001 Before removing the system board, follow these steps: Shut down the computer.
  • Page 95 Remove the system board: Release the ZIF connector to which the front LED board cable is attached and disconnect the front LED board cable (1) from the system board. Disconnect the speaker cable (2) from the system board. Remove the three Torx8 T8M2.5×6.0 screws (3) that secure the system board to the base enclosure.

  • Page 96: Expresscard Assembly

    ExpressCard assembly Description Spare part number ExpressCard assembly 492567-001 Before removing the PC Card assembly, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.
  • Page 97 Turn the system board rightside up, with the rear toward you. Remove the ExpressCard assembly. Reverse this procedure to install the ExpressCard assembly. Component replacement procedures...

  • Page 98: Modem Module

    Modem module Description Spare part number Modem modules NOTE: The modem module spare part kits do not include a modem module cable. The modem module cable is included in the Cable Kit, spare part number 492555-001. For use in all countries and regions except Australia and New Zealand 461750-001 For use only in Australia and New Zealand 461750-011...
  • Page 99 Remove the modem module . Reverse this procedure to install the modem module. Component replacement procedures...

  • Page 100: Fan

    Description Spare part number Fan (includes thermal material) 492568-001 NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the right side and rear panel of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist.
  • Page 101 Lift the fan up (3) to remove. Reverse this procedure to install the fan. Component replacement procedures...

  • Page 102: Heat Sink

    Heat sink Description Spare part number Heat sink (includes replacement thermal material and replacement thermal material cleaning kit) 492582–001 Before removing the heat sink, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 103 Remove the heat sink (2). NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink and system board each time the heat sink is removed. Thermal paste and pads are located on the heat sink (1) and on system board components (2). Replacement thermal material is included with all heat sink and system board spare part kits.

  • Page 104: Computer Setup

    Computer Setup Starting Computer Setup Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is not working or will not load. NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your computer.

  • Page 105: Using Computer Setup

    Using Computer Setup Navigating and selecting in Computer Setup The information and settings in Computer Setup are accessed from the File, Security, Diagnostics, and System Configuration menus. To navigate and select in Computer Setup, follow these steps: Turn on or restart the computer, and then press while the “Press the ESC key for Startup Menu”...

  • Page 106: Restoring Factory Settings In Computer Setup

    Restoring factory settings in Computer Setup NOTE: Restoring defaults will not change the hard drive mode. To return all settings in Computer Setup to the values that were set at the factory, follow these steps: Turn on or restart the computer, and then press while the “Press the ESC key for Startup Menu”...

  • Page 107: Computer Setup Menus

    Computer Setup menus The menu tables in this section provide an overview of Computer Setup options. NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by your computer. File menu Select To do this ●...

  • Page 108: Security Menu

    Security menu NOTE: Some of the menu items listed in this section may not be supported by your computer. Select To do this Setup BIOS Administrator Password Set up a BIOS administrator password. ● User Management (requires a BIOS administrator password) Create a new BIOS user account.

  • Page 109: Diagnostics Menu

    Diagnostics menu Select To do this ● System Diagnostics menu F1 System Information—Displays the following information: ◦ Identification information for the computer and the batteries in the system. ◦ Specification information for the processor, cache and memory size, system ROM, video revision, and keyboard controller version.

  • Page 110: System Configuration Menu

    System Configuration menu NOTE: Some of the listed System Configuration options may not be supported by your computer. Select To do this Language Change the Computer Setup language. ● Boot Options Set a Startup Menu delay (in seconds). ● Enable/disable Custom Logo (disabled by default). ●...
  • Page 111 Select To do this NOTE: Availability of the options above varies by computer model. ● Enable/disable secondary battery fast charge (enabled by default). ● Enable/disable HP QuickLook 2 (enabled by default). ● Enable/disable Virtualization Technology (select models only; disabled by default). ●...
  • Page 112 Select To do this Port Options (all are enabled by default) NOTE: All port options are enabled by default. ● Enable/disable the Smart Card slot. ● Enable/disable the ExpressCard slot. ● Enable/disable the serial port. ● Enable/disable the parallel port. ●...

  • Page 113: Specifications

    Specifications Computer specifications Metric U.S. Dimensions Depth 21.43 cm 8.44 in Width 28.23 cm 11.11 in Height (front to rear) 2.52 to 3.40 cm 0.99 to 1.34 in Weight Equipped with DVD-ROM Drive, 9-cell battery, and WLAN 1.79 kg 3.95 lbs module Equipped with DVD-ROM Drive, 6-cell battery, and WLAN 1.64 kg...

  • Page 114: 12.1-Inch, Wxga Display Specifications

    12.1-inch, WXGA display specifications Metric U.S. Dimensions Height 16.9 cm 6.7 in Width 26.2 cm 10.3 in Diagonal 30.8 cm 12.1 in Number of colors Up to 16.8 million Contrast ratio 250:1 (typical) Brightness 180 nits (typical) Pixel resolution Pitch 0.279 ×...

  • Page 115: Hard Drive Specifications

    Hard drive specifications 250-GB* 200-GB* 160-GB* 120-GB* 80-GB* Dimensions Height 9.5 mm 9.5 mm 9.5 mm 9.5 mm 9.5 mm Width 70 mm 70 mm 70 mm 70 mm 70 mm Weight 102 g 102 g 102 g 102 g 102 g Interface type SATA...

  • Page 116: Dvd-Rom Drive Specifications

    DVD-ROM Drive specifications Applicable disc DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18), CD-ROM (Mode 1 and 2), CD Digital Audio, CD-XA ready (Mode 2, Form 1 and Form 2), CD-I (Mode 2, Form 1 and Form 2), CD-RW, Photo CD (single and multisession), and CD-Bridge Access time Random <...

  • Page 117: Dvd±Rw And Cd-Rw Supermulti Double-Layer Combo Drive Specifications

    DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive specifications Applicable disc Read: Write: CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-R and CD-RW CD-ROM, CD-ROM XA, MIXED MODE DVD+R, DVD+RW, DVD-R, DVD-RW, CD, CD-I, CD-I Bridge (Photo-CD, Video DVD-RAM CD), Multisession CD (Photo-CD, CD- EXTRA, Portfolio, CD-R, CD-RW), CD- R, CD-RW, DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD-R, DVD-RW,...

  • Page 118: System Dma Specifications

    System DMA specifications Hardware DMA System function DMA0 Not applicable DMA1* Not applicable DMA2* Not applicable DMA3 Not applicable DMA4 Direct memory access controller DMA5* Available for ExpressCard DMA6 Not assigned DMA7 Not assigned *ExpressCard controller can use DMA 1, 2, or 5. 110 Chapter 6 Specifications...

  • Page 119: System Interrupt Specifications

    System interrupt specifications Hardware IRQ System function IRQ0 System timer IRQ1 Standard 101-/102-Key or Microsoft® Natural Keyboard IRQ2 Cascaded IRQ3 Intel 82801DB/DBM USB2 Enhanced Host Controller—24CD IRQ4 COM1 IRQ5* Conexant AC—Link Audio Intel 82801DB/DBM SMBus Controller—24C3 Data Fax Modem with SmartCP IRQ6 Diskette drive IRQ7*...

  • Page 120: System I/O Address Specifications

    System I/O address specifications I/O address (hex) System function (shipping configuration) 000 - 00F DMA controller no. 1 010 - 01F Unused 020 - 021 Interrupt controller no. 1 022 - 024 Opti chipset configuration registers 025 - 03F Unused 02E - 02F 87334 “Super I/O”...
  • Page 121 I/O address (hex) System function (shipping configuration) 202 - 21F Unused 220 - 22F Entertainment audio 230 - 26D Unused 26E - 26 Unused 278 - 27F Unused 280 - 2AB Unused 2A0 - 2A7 Unused 2A8 - 2E7 Unused 2E8 - 2EF Reserved serial port 2F0 - 2F7...

  • Page 122: System Memory Map Specifications

    System memory map specifications Size Memory address System function 640 KB 00000000-0009FFFF Base memory 128 KB 000A0000-000BFFFF Video memory 48 KB 000C0000-000CBFFF Video BIOS 160 KB 000C8000-000E7FFF Unused 64 KB 000E8000-000FFFFF System BIOS 15 MB 00100000-00FFFFFF Extended memory 58 MB 04800000-07FFFFFF Super extended memory 58 MB...

  • Page 123: Screw Listing

    Screw listing This section provides specification and reference information for the screws and screw locks used in the computer. All screws listed in this section are available in the Screw Kit, spare part number 492579-001.

  • Page 124: Phillips Pm 2.0×4.0 Screw

    Phillips PM 2.0×4.0 screw Color Quantity Length Thread Head diameter Black 4.0 mm 2.0 mm 4.5 mm Where used: 1 screw that secures the Bluetooth module to the Bluetooth module compartment cover Where used: 2 screws that secure the WLAN module to the base enclosure 116 Chapter 7 Screw listing...
  • Page 125 Where used: 2 screws that secure the WWAN board to the base enclosure Where used: 2 screws that secure the optical drive bracket to the optical drive Where used: 4 screws that secure the display hinges to the display panel Phillips PM 2.0×4.0 screw 117...
  • Page 126 Where used: One screw that secures the top cover to the base enclosure Where used: One screw that secures the speaker to the base enclosure Where used: 2 screws that secure the modem module to the system board 118 Chapter 7 Screw listing...
  • Page 127 Where used: One screw that secures the fan to the system board Phillips PM 2.0×4.0 screw 119...

  • Page 128: Torx T8M2.0×5.0 Screw

    Torx T8M2.0×5.0 screw Color Quantity Length Thread Head diameter Black 5.0 mm 2.0 mm 4.5 mm Where used: 2 screws that secure the optical drive to the computer Where used: 2 screws that secure the display assembly to the computer 120 Chapter 7 Screw listing...
  • Page 129 Where used: 4 screws that connect the bezel to the display assembly Where used: One screw that secures the top cover to the base enclosure Where used: One screw that secures the top cover to the base enclosure Torx T8M2.0×5.0 screw 121...
  • Page 130 Where used: One screw that secures the primary hard drive to the computer Where used: Two screws that secure the ExpressCard assembly to the system board 122 Chapter 7 Screw listing...

  • Page 131: Torx T8M2.0×6.0 Captive Screw

    Torx T8M2.0×6.0 captive screw Color Quantity Length Thread Head diameter Black 6.0 mm 2.0 mm 5.0 mm Where used: 2 captive screws that secure the hard drive bracket to the primary hard drive (screws secured by C-clips) Torx T8M2.0×6.0 captive screw 123...

  • Page 132: Phillips Pm2.5×4.0 Screw

    Phillips PM2.5×4.0 screw Color Quantity Length Thread Head diameter Black 6.0 mm 2.0 mm 5.0 mm Where used: 2 screws that secure the display panel to the display enclosure Where used: One screw that secures the primary memory module shield to the top cover 124 Chapter 7 Screw listing...

  • Page 133: Phillips Pm2.5×6.0 Captive Screw

    Phillips PM2.5×6.0 captive screw Color Quantity Length Thread Head diameter Black 6.0 mm 2.5 mm 5.0 mm Where used: (1) One captive screw that secures the Bluetooth module cover to the computer (screw is secured by a C-clip) (2) One captive screw that secures the memory module compartment cover to the computer (screw is secured by a C-clip) (3) One captive screw that secures the broadband wireless module compartment cover to the computer (screw is secured by a C-clip)

  • Page 134: Phillips Pm2.5×6.0 Screw

    Phillips PM2.5×6.0 screw Color Quantity Length Thread Head diameter Black 6.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the switch cover to the base enclosure Where used: 4 screws that secure the optical bay hard drive to the computer 126 Chapter 7 Screw listing...
  • Page 135 Where used: 4 screws that secure the optical bay hard drive to the hard drive bracket Where used: 2 screws that secure the hard drive to the connector board Phillips PM2.5×6.0 screw 127...

  • Page 136: Torx T8M2.5×6.0 Screw

    Torx T8M2.5×6.0 screw Color Quantity Length Thread Head diameter Black 6.0 mm 2.5 mm 5.0 mm Where used: 6 screws that secure the top cover to the base enclosure Where used: 2 screws that secure the top cover to the base enclosure 128 Chapter 7 Screw listing...
  • Page 137 Where used: 3 screws that secure the system board to the base enclosure Torx T8M2.5×6.0 screw 129...

  • Page 138: Torx T8M2.5×9.0 Captive Screw

    Torx T8M2.5×9.0 captive screw Color Quantity Length Thread Head diameter Black 9.0 mm 2.5 mm 5.0 mm Where used: 4 captive screws that secure the heat sink to the system board (screws secured by C- clips) 130 Chapter 7 Screw listing...

  • Page 139: Phillips Pm2.5×11.0 Captive Screw

    Phillips PM2.5×11.0 captive screw Color Quantity Length Thread Head diameter Black 11.0 mm 2.5 mm 5.0 mm Where used: 5 captive screws that secure the keyboard to the computer (screws secured by C-clips) Phillips PM2.5×11.0 captive screw 131...

  • Page 140: Backup And Recovery

    Backup and recovery Backup and recovery in Windows Vista Overview To protect your information, use the Backup and Restore Center to back up individual files and folders, back up your entire hard drive (select models only), or create system restore points. In case of system failure, you can use the backup files to restore the contents of your computer.

  • Page 141: Backing Up Your Information

    Backing up your information Recovery after a system failure is as complete as your most current backup. You should create your initial backup immediately after software setup. As you add new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup. You can back up your information to an optional external hard drive, a network drive, or discs.

  • Page 142: Performing A Recovery

    Performing a recovery In case of system failure or instability, the computer provides the following tools to recover your files: ● Windows recovery tools: You can use the Backup and Restore Center to recover information you have previously backed up. You can also use Windows Startup Repair to fix problems that might prevent Windows from starting correctly.

  • Page 143: Using F11

    Using f11 CAUTION: Using completely erases hard drive contents and reformats the hard drive. All files you have created and any software installed on the computer are permanently removed. The recovery tool reinstalls the operating system and HP programs and drivers that were installed at the factory.

  • Page 144: Backup And Recovery In Windows Xp

    Backup and recovery in Windows XP Overview To protect your information, use the Windows® Backup utility (select models only) to back up files and folders or create recovery points. In case of system failure, you can use the backup files to restore your computer.

  • Page 145: Backing Up Your Information

    Backing up your information Recovery after a system failure is as complete as your most current backup. You should create your initial backup immediately after software setup. As you add new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup. You can back up individual files or folders to an optional external hard drive or to a network drive.

  • Page 146: Performing A Recovery

    Performing a recovery In case of system failure or instability, the computer provides the following tools to recover your files: ● Windows recovery tools (select models only): You can use the Windows Backup utility to recover information you have previously backed up. ●...

  • Page 147: Connector Pin Assignments

    Connector pin assignments Audio-in (microphone) Signal Audio signal in Audio signal in Ground Audio-in (microphone) 139...

  • Page 148: Audio-Out (Headphone)

    Audio-out (headphone) Signal Audio out, left channel Audio out, right channel Ground 140 Chapter 9 Connector pin assignments...

  • Page 149: External Monitor

    External monitor Signal Red analog Green analog Blue analog Not connected Ground Ground analog Ground analog Ground analog +5 VDC Ground Monitor detect DDC 2B data Horizontal sync Vertical sync DDC 2B clock External monitor 141...

  • Page 150: Ieee 1394 (Firewire)

    IEEE 1394 (FireWire) Signal Twisted-pair B, differential signals Twisted-pair B, differential signals Twisted-pair A, differential signals Twisted-pair A, differential signals 142 Chapter 9 Connector pin assignments...

  • Page 151: Modem)

    RJ-11 (modem) Signal Unused Ring Unused Unused Unused RJ-11 (modem) 143...

  • Page 152: Network)

    RJ-45 (network) Signal Transmit + Transmit - Receive + Unused Unused Receive - Unused Unused 144 Chapter 9 Connector pin assignments...

  • Page 153: Universal Serial Bus

    Universal Serial Bus Signal +5 VDC Data - Data + Ground Universal Serial Bus 145...

  • Page 154: 10 Power Cord Set Requirements

    10 Power cord set requirements The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC or from 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased.

  • Page 155: Requirements For Specific Countries And Regions

    Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia EANSW Austria Belgium CEBC Canada Denmark DEMKO Finland FIMKO France Germany Italy Japan METI The Netherlands KEMA Norway NEMKO The People's Republic of China South Korea Sweden SEMKO Switzerland Taiwan...

  • Page 156: 11 Recycling

    11 Recycling Battery When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal. 148 Chapter 11 Recycling...

  • Page 157: Display

    Display WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. CAUTION: The procedures in this chapter can result in damage to display components. The only components intended for recycling purposes are the liquid crystal display (LCD) panel and the backlight.
  • Page 158 Perform the following steps to disassemble the display assembly: Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel disengages from the display assembly.
  • Page 159 Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). Remove all screws (1) that secure the display panel assembly to the display enclosure. Remove the display panel assembly (2) from the display enclosure. Turn the display panel assembly upside down. Remove all screws that secure the display panel frame to the display panel.
  • Page 160 Remove the display panel frame (2) from the display panel. Remove the screws (1) that secure the backlight cover to the display panel. Lift the top edge of the backlight cover (2) and swing it outward. Remove the backlight cover. Turn the display panel right-side up.
  • Page 161 Remove the backlight cables (1) from the clip (2) in the display panel. Turn the display panel upside down. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. Remove the backlight frame from the display panel.
  • Page 162 Remove the backlight from the backlight frame. Disconnect the display panel cable (1) from the LCD panel. Remove the screws (2) that secure the LCD panel to the display rear panel. Release the LCD panel (3) from the display rear panel. Release the tape (4) that secures the LCD panel to the display rear panel.

  • Page 163: Index

    Index Symbols/Numerics battery wireless button 103 1394 port, identifying 14 removal 46 WWAN device radio 103 spare part numbers 24, 46 built-in device options 103 battery bay 16 business card slot, identifying 12 AC adapter, spare part battery light, identifying 7, 12 buttons number 32, 33 battery release latches,...
  • Page 164 restoring factory settings 98 drives Security menu 100 preventing damage 38 graphics, product description 1 System Configuration drives, boot order 102 grounding equipment and menu 102 Dual Core CPU 103 methods 41 using 97 DVD-ROM Drive computer specifications 105 spare part number 24 hard disk test 101 connector, power 15 specifications 108...
  • Page 165 keyboard light button, microphone jack network jack 144 identifying 11 pin assignments 139 RJ-11 143 keyboard light, identifying 11 model name 1 RJ-45 jack 144 keypad keys, identifying 10 modem jack Universal Serial Bus (USB) keys pin assignments 143 port 145 esc 10 modem module plastic parts 37...
  • Page 166 chipset 1 Security menu 100 diskette drive 2 SATA (Serial Advanced System Configuration docking 3 Technology Attachment) devices menu 102 Ethernet 2 AHCI (Advanced Host external media cards 3 Controller Interface) 102 removal 47 graphics 1 IDE (Integrated Drive spare part number 47 hard drives 2 Electronics) 102 SIM slot, identifying 16...
  • Page 167 system date and time 99 Windows Vista operating system System Diagnostics menu 101 DVD 135 system DMA 110 wireless antenna, system fan 102 disconnecting 54 system IDs 100 wireless button, identifying 8 system information 99 wireless light, identifying 6, 12 system memory map 114 wireless, product description 3 WLAN antennae, identifying 18...

Table of Contents