Table of Contents
Advertisement
Universal Client Access
Universal Client Access
When Universal Client Access is enabled, it allows wireless client association over the backhaul radio.
Generally, backhaul radio is a 5-GHz radio for most of the mesh access points except for 1522 where backhaul
can be 2.4 GHz. This means that a backhaul radio can carry both backhaul traffic and client traffic.
When Universal Client Access is disabled, only backhaul traffic is sent over the backhaul radio and client
association is only over the second radio(s).
Note
Universal Client Access is disabled by default. After this feature is enabled, all mesh access points reboot.
This feature is applicable to mesh access points with two or more radios (1552, 1524SB, 1522, Indoor APs
in mesh mode) excluding the 1524PS.
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
118
Mesh Alarm Criteria
Max Hop Count................................. 4
Recommended Max Children for MAP.............. 10
Recommended Max Children for RAP.............. 20
Low Link SNR.................................. 12
High Link SNR................................. 60
Max Association Number........................ 10
Association Interval.......................... 60 minutes
Parent Change Numbers......................... 3
Parent Change Interval........................ 60 minutes
Mesh Multicast Mode.............................. In-Out
Mesh Full Sector DFS............................. enabled
Mesh Ethernet Bridging VLAN Transparent Mode..... enabled
Connecting the Cisco 1500 Series Mesh Access Points to the Network
OL-27593-01
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
