Configuring Interface Characteristics; Understanding Interface Types - Cisco IE-3000-8TC Software Configuration Manual

Software configuration guide

Hide thumbs Also See for IE-3000-8TC:

Table of Contents

Configuring Interface Characteristics

This chapter defines the types of interfaces on the IE 3000 switch and describes how to configure them.

The chapter consists of these sections:

For complete syntax and usage information for the commands used in this chapter, see the switch

command reference for this release and the Cisco IOS Interface Command Reference, Release 12.2 from

the Cisco.com page under Documentation > Cisco IOS Software > 12.2 Mainline > Command

This section describes the different types of interfaces supported by the switch with references to

chapters that contain more detailed information about configuring these interface types. The rest of the

chapter describes configuration procedures for physical interface characteristics.

These sections describe the interface types:

Understanding Interface Types, page 13-1

Using Interface Configuration Mode, page 13-4

Configuring Ethernet Interfaces, page 13-10

Configuring the System MTU, page 13-17

Monitoring and Maintaining the Interfaces, page 13-18

Port-Based VLANs, page 13-2

Switch Ports, page 13-2

EtherChannel Port Groups, page 13-3

Dual-Purpose Uplink Ports, page 13-4

Connecting Interfaces, page 13-4

C H A P T E R

Cisco IE 3000 Switch Software Configuration Guide

Show Quick Links

Table of Contents