Resetting The 802.1X Authentication Configuration To The Default Values; Displaying 802.1X Statistics And Status - Cisco IE-3000-8TC Software Configuration Manual
Software configuration guide
Hide thumbs
Also See for IE-3000-8TC:
- Command reference manual (802 pages) ,
- Administration manual (496 pages) ,
- Message manual (98 pages)
Table of Contents
Advertisement
Chapter 12
Configuring IEEE 802.1x Port-Based Authentication
Command
Step 3
no dot1x pae
Step 4
end
Step 5
show authentication interface-id
or
show dot1x interface interface-id
Step 6
copy running-config startup-config
To configure the port as an 802.1x port access entity (PAE) authenticator, which enables 802.1x on the
port but does not allow clients connected to the port to be authorized, use the dot1x pae authenticator
interface configuration command.
This example shows how to disable 802.1x authentication on the port:
Switch(config)# interface gigabitethernet1/2
Switch(config-if)# no dot1x pae authenticator
Resetting the 802.1x Authentication Configuration to the Default Values
Beginning in privileged EXEC mode, follow these steps to reset the 802.1x authentication configuration
to the default values. This procedure is optional.
Command
Step 1
configure terminal
Step 2
interface interface-id
Step 3
dot1x default
Step 4
end
Step 5
show authentication interface
interface-id
or
show dot1x interface interface-id
Step 6
copy running-config startup-config
Displaying 802.1x Statistics and Status
To display 802.1x statistics for all ports, use the show dot1x all statistics privileged EXEC command.
To display 802.1x statistics for a specific port, use the show dot1x statistics interface interface-id
privileged EXEC command.
To display the 802.1x administrative and operational status for the switch, use the show dot1x all
[details | statistics | summary] privileged EXEC command. To display the 802.1x administrative and
operational status for a specific port, use the show dot1x interface interface-id privileged EXEC
command.
For detailed information about the fields in these displays, see the command reference for this release.
OL-13018-03
Purpose
Disable 802.1x authentication on the port.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Purpose
Enter global configuration mode.
Enter interface configuration mode, and specify the port to be configured.
Reset the 802.1x parameters to the default values.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Cisco IE 3000 Switch Software Configuration Guide
Displaying 802.1x Statistics and Status
12-59
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
