hit counter script
Linksys SRW224P - 10/100 - Gigabit Switch User Manual
  1. Manuals
  2. Brands
  3. Linksys Manuals
  4. Switch
  5. SRW224P - 10/100 - Gigabit Switch
  6. User manual
Linksys SRW224P - 10/100 - Gigabit Switch User Manual

Linksys SRW224P - 10/100 - Gigabit Switch User Manual

Business series wireless-g access point with power over ethernet and rangebooster
Hide thumbs Also See for SRW224P - 10/100 - Gigabit Switch:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
USER GUIDE
Wireless-G Access Point
with Power Over Ethernet
BUSINESS SERIES
and Rangebooster
Model No. WAP200

Advertisement

Table of Contents
loading

Related Manuals for Linksys SRW224P - 10/100 - Gigabit Switch

Summary of Contents for Linksys SRW224P - 10/100 - Gigabit Switch

  • Page 1 USER GUIDE Wireless-G Access Point with Power Over Ethernet BUSINESS SERIES and Rangebooster Model No. WAP200...
  • Page 2 Wireless-G Access Point with Power Over Ethernet and Rangebooster Copyright and Trademarks Specifications are subject to change without notice. Linksys, Cisco and the Cisco Logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2008 Cisco Systems, Inc.

  • Page 3: Table Of Contents

    Wireless-G Access Point with Power Over Ethernet and Rangebooster Table of Contents Chapter 1: Introduction Welcome What’s in this User Guide? Chapter 2: Planning Your Wireless Network Network Topology Roaming Network Layout Example of a simple wireless network Chapter 3: Getting to Know the Wireless-G Access Point The LEDs The Ports Antennas and Positions...
  • Page 4 Wireless-G Access Point with Power Over Ethernet and Rangebooster The Administration - Log Tab The Administration - Factory Default Tab The Administration - Firmware Upgrade Tab The Administration - Reboot Tab The Administration - Config Management Tab The Status - Local Network Tab The Status - Wireless Tab The Status - System Performance Tab Appendix A: Troubleshooting...
  • Page 5 Wireless-G Access Point with Power Over Ethernet and Rangebooster List of Figures Figure 2-1: Example of a Simple Wireless Network Figure 3-1: Front Panel Figure 3-2: Back View Figure 3-3: Desktop Placement and Antenna Setup Figure 4-1: Connect the Ethernet Cable Figure 4-2: Connect the Power Figure 4-3: Stand Figure 4-4: Mounting Dimensions...
  • Page 6 Wireless-G Access Point with Power Over Ethernet and Rangebooster Figure 6-20: Security Monitor - Basic Settings Figure 6-21: Security Monitor - Event Log Figure 6-22: Administration - Management Figure 6-23: Administration - Log Figure 6-24: Administration - Factory Default Figure 6-25: Administration - Firmware Upgrade Figure 6-26: Administration - Reboot Figure 6-27: Administration - Config Management Figure 6-28: Status - Local Network...

  • Page 7: Chapter 1: Introduction Welcome

    Wireless-G Access Point with Power Over Ethernet and Rangebooster Chapter 1: Introduction Welcome access point: a device that allows wireless-equipped Thank you for choosing the Wireless-G Access Point with Power Over Ethernet and Rangebooster. This Access computers and other devices to communicate with each Point will allow you to network wirelessly better than ever.

  • Page 8: What's In This User Guide

    Wireless-G Access Point with Power Over Ethernet and Rangebooster What’s in this User Guide? This user guide covers the steps for setting up and using the Wireless-G Access Point. • Chapter 1: Introduction This chapter describes the Wireless-G Access Point’s applications and this User Guide. •...
  • Page 9 • Appendix H: Regulatory Information This appendix supplies the Access Point’s regulatory information. • Appendix I: Contact Information This appendix provides contact information for a variety of Linksys resources, including Technical Support. Chapter 1: Introduction What’s in this User Guide?

  • Page 10: Chapter 2: Planning Your Wireless Network

    Linksys also provides products to allow wireless adaptors to access wired network through a bridge such as the wireless access point, or wireless router. An integrated wireless and wired network is called an infrastructure infrastructure: a wireless network that is bridged to a wired network.

  • Page 11: Network Layout

    To link your wired network with your wireless network, connect the Access Point’s Ethernet network port to any switch or router with Power over Ethernet (PoE)—or a PoE injector, such as the Linksys WAPPOE or WAPPOE12. Note that the 12 VDC on the WAPPOE12 is for the splitter output. Both PoE Injectors provide 48 VDC power output.

  • Page 12: Example Of A Simple Wireless Network

    The above diagram shows a typical infrastructure wireless network setup. The wireless Access Points are connecting to a Linksys switch that provides power to the Access Points. Each Access Point can connect multiple wireless devices to the network. This network will provide connectivity among wireless network devices and PCs that have a wired connection to the switch.

  • Page 13: Chapter 3: Getting To Know The Wireless-G Access Point

    Wireless-G Access Point with Power Over Ethernet and Rangebooster Chapter 3: Getting to Know the Wireless-G Access Point The LEDs The Access Point's LEDs, where information about network activity is displayed, are located on the front panel. Figure 3-1: Front Panel Power Green.

  • Page 14: The Ports

    Wireless-G Access Point with Power Over Ethernet and Rangebooster The Ports The Access Point’s port are located on the back of the device. port: the connection point on a computer or networking device used for plugging in cables or adapters Figure 3-2: Back View Reset Button There are two ways to reset the Access Point to the factory default configuration.

  • Page 15: Antennas And Positions

    The Access Point’s antennas are located on the back of the device. The Access Point can be placed on a desktop or wall-mounted. When placed on a desktop, the Access Point can be stacked with other Linksys Business Series products.

  • Page 16: Chapter 4: Connecting The Wireless-G Access Point

    Wireless-G Access Point with Power Over Ethernet and Rangebooster Chapter 4: Connecting the Wireless-G Access Point Overview hardware: the physical aspect of computers, telecommunications, and This chapter explains how to place and connect the Access Point. other information technology devices. Depending on your application, you might want to set up the device first before mounting the device.

  • Page 17: Placement Options

    Wireless-G Access Point with Power Over Ethernet and Rangebooster Placement Options There are three ways to place the Wireless-G Access Point. The first way is to place it horizontally on a surface, so it sits on its four rubber feet. The second way is to stand the Access Point vertically on a surface. The third way is to mount it on a wall.

  • Page 18: Chapter 5: Setting Up The Wireless-G Access Point

    There are three ways to connect to your Access Point for the first time. 1. If you have a 48VDC Power Injector (e.g. Linksys WAPPOE), power up your Access Point first, then connect the Injector’s cable to your PC. Configure your PC to have the static IP address on the same subnet as the Access Point’s default IP address (192.168.1.245).

  • Page 19: Navigating The Utility

    Wireless-G Access Point with Power Over Ethernet and Rangebooster 3. Although it is not recommended, you can connect your PC wirelessly to the Access Point when the DHCP server is connected on the LAN side. It is not recommended, because you can easily lose your connection through configuration changes.
  • Page 20 Wireless-G Access Point with Power Over Ethernet and Rangebooster • Advanced Wireless Settings. Use this screen to configure the Access Point’s more advanced wireless settings. • VLAN & QoS. Use this screen to configure VLAN and QoS settings. AP Mode Use this screen to configure the Access Point mode.
  • Page 21 Wireless-G Access Point with Power Over Ethernet and Rangebooster Status You will be able to view status information for your local network, wireless networks, and network performance. • Local Network. This screen displays system information, including software & hardware version, MAC address, and IP address on the LAN side of the Access Point.

  • Page 22: Chapter 6: Configuring The Wireless-G Access Point

    Host Name. This is the host name assigned to the Access Point. This host name will be published to your DNS server if the Access Point is configured to acquire the IP address through DHCP. In that case, Linksys recommends to follow the company policy on the host name assignment. The default name is Linksys.

  • Page 23: The Setup - Time Tab

    Wireless-G Access Point with Power Over Ethernet and Rangebooster • Subnet Mask. The Subnet Mask must be the same as that set on the LAN that your Access Point is connected to. The default is 255.255.255.0. • Default Gateway. Your ISP will provide you with the Default Gateway Address, which is the ISP server’s IP address.

  • Page 24: The Wireless - Basic Wireless Settings Tab

    32 alphanumeric characters, and may be any keyboard character. Make sure this setting is the same for all devices in your wireless network. The default SSID name is linksys-g. SSID Broadcast. This option allows the SSID to be broadcast on your network. You may want to enable this function while configuring your network, but make sure that you disable it when you are finished.

  • Page 25: The Wireless - Wireless Security Tab

    Wireless-G Access Point with Power Over Ethernet and Rangebooster Change these settings as described here and click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Help information is available on the right side of the screen. The Wireless - Wireless Security Tab Change the Access Point’s wireless security settings on this screen.

  • Page 26: Figure 6-6: Wireless - Wireless Security (Wpa-Personal)

    Wireless-G Access Point with Power Over Ethernet and Rangebooster Default Transmit Key. Select the key to be used for data encryption. WEP Encryption. Select a level of WEP encryption, 64 bits (10 hex digits) or 128 bits (26 hex digits). Passphrase.

  • Page 27: Figure 6-8: Wireless - Wireless Security (Wpa2-Personal Mixed)

    Wireless-G Access Point with Power Over Ethernet and Rangebooster WPA2-Personal Mixed This security mode supports the transition from WPA-Personal to WPA2-Personal. You can have client devices that use either WPA-Personal or WPA2-Personal. The Access Point will automatically choose the encryption algorithm used by each client device.

  • Page 28: Figure 6-10: Wireless - Wireless Security (Wpa2-Enterprise)

    Wireless-G Access Point with Power Over Ethernet and Rangebooster WPA2-Enterprise This option features WPA2 used in coordination with a RADIUS server for client authentication. (This should only be used when a RADIUS server is connected to the Access Point.) RADIUS Server IP Address. Enter the RADIUS server’s IP address. RADIUS Server Port.

  • Page 29: Figure 6-12: Wireless - Wireless Security (Radius)

    Wireless-G Access Point with Power Over Ethernet and Rangebooster RADIUS This security mode is also known as Dynamic WEP with IEEE 802.1X. A RADIUS server is used for client authentication and WEP is used for data encryption. The WEP key is automatically generated by the RADIUS server.

  • Page 30: The Wireless - Wireless Connection Control Tab

    Wireless-G Access Point with Power Over Ethernet and Rangebooster The Wireless - Wireless Connection Control Tab This screen allows you to configure the Connection Control List to either permit or block specific wireless client devices connecting to (associating with) the Access Point. Wireless Connection Control Select SSID.

  • Page 31: The Wireless - Advanced Wireless Settings Tab

    Wireless-G Access Point with Power Over Ethernet and Rangebooster The Wireless - Advanced Wireless Settings Tab This screen allows you to configure the advanced settings for the Access Point. Linksys recommends to let your Access Point automatically adjust the parameters for maximum data throughput.

  • Page 32: The Wireless - Vlan & Qos Tab

    Wireless-G Access Point with Power Over Ethernet and Rangebooster Fragmentation Threshold. This specifies the maximum size a data packet can be before splitting and creating a new packet. It should remain at its default setting of 2346. A smaller setting means smaller packets, which will create more packets for each transmission.
  • Page 33 Wireless-G Access Point with Power Over Ethernet and Rangebooster The following options are VLAN global settings for the Access Point. Default CoS (Priority). Select Enabled if you want to assign a default CoS value to each SSID. This option is automatically enabled when the VLAN option is enabled.

  • Page 34: The Ap Mode Tab

    IMPORTANT: For the AP Client and Wireless Bridge modes, the remote access point must be a second Linksys Wireless-G Access Point. For the Wireless Repeater mode, the remote wireless bridge must be a second Linksys Wireless-G Access Point or Wireless-G Router.

  • Page 35: Figure 6-18: Wireless Repeater Mode

    Wireless-G Access Point with Power Over Ethernet and Rangebooster Wireless Repeater. When set to Wireless Repeater mode, the Wireless Repeater is able to talk to up a remote access point within its range and retransmit its signal. Click Site Survey to select the access point that will have its signal repeated by this Access Point or enter the MAC address of the access point manually.

  • Page 36: Figure 6-19: Wireless Bridge Mode

    Wireless-G Access Point with Power Over Ethernet and Rangebooster Wireless Bridge. This mode connects physically separated wired networks using multiple access points. Wireless clients will not be able to connect to the access point in this mode. Enter the MAC address(es) of the access point(s) that will bridge to this access point.

  • Page 37: The Security Monitor - Basic Settings Tab

    This feature works together with Linksys Business Series wireless client adapters. A client utility will be provided with the client card, which will allow you to download information from the Access Point. The current version will support wireless Access Points and wireless clients detection and classification.

  • Page 38: The Security Monitor - Event Log Tab

    Wireless-G Access Point with Power Over Ethernet and Rangebooster The Security Monitor - Event Log Tab Configure the event logging options for security monitor. E-mail Notification Recipient To. Enter the e-mail address that the alarm notifications should be sent to. Alarm Type.
  • Page 39 Wireless-G Access Point with Power Over Ethernet and Rangebooster • Duplicate SSID in use. Indicates an unauthorized AP has the same SSID value as an authorized AP. SYSLOG Notification Logviewer IP Address. Enter the IP address of the system that will store the system log. Alarm Type.

  • Page 40: The Administration - Management Tab

    Wireless-G Access Point with Power Over Ethernet and Rangebooster Security Monitor Server This is a special Syslog server that can record all security monitor events instead of selected events. Server IP Address. Enter the IP address of the server. The Administration - Management Tab On this screen you can configure the password, Web Access, and SNMP settings.
  • Page 41 Wireless-G Access Point with Power Over Ethernet and Rangebooster SNMP SNMP is a popular network monitoring and management protocol. It provides network administrators with the ability to monitor the status of the Access Point and receive notification of any critical events as they occur on the Access Point.

  • Page 42: The Administration - Log Tab

    Wireless-G Access Point with Power Over Ethernet and Rangebooster The Administration - Log Tab On this screen you can configure the log settings and alerts of particular events. You can have logs that keep track of the Access Point’s activities. Email Alert E-Mail Alert.

  • Page 43: The Administration - Factory Default Tab

    Before you upgrade the Access Point’s firmware, note all of your custom settings. After you upgrade its firmware, you will have to re-enter all of your configuration settings. To upgrade the Access Point’s firmware: 1. Download the firmware upgrade file from the Linksys website, www.linksys.com. 2. Extract the firmware upgrade file on your computer.

  • Page 44: The Administration - Reboot Tab

    Wireless-G Access Point with Power Over Ethernet and Rangebooster 3. On the Firmware Upgrade screen, enter the location of the firmware upgrade file in the field provided, or click the Browse button to find the file. 4. Click the Upgrade button, and follow the on-screen instructions. Help information is available on the right side of the screen.

  • Page 45: The Status - Local Network Tab

    Wireless-G Access Point with Power Over Ethernet and Rangebooster The Status - Local Network Tab The Local Network screen displays the Access Point’s current status information for the local network. Information Hardware Version. This is the version of the Access Point’s current hardware. Software Version.

  • Page 46: The Status - Wireless Tab

    Wireless-G Access Point with Power Over Ethernet and Rangebooster The Status - Wireless Tab The Wireless screen displays the Access Point’s current status information for the wireless network(s). Wireless Network MAC Address. The MAC Address of the Access Point’s wireless interface is displayed here. Mode.

  • Page 47: The Status - System Performance Tab

    Wireless-G Access Point with Power Over Ethernet and Rangebooster The Status - System Performance Tab The System Performance screen displays the Access Point’s status information for its current settings and data transmissions. System Performance Wired Name. This indicates that the statistics are for the wired network, the LAN. IP Address.
  • Page 48 Wireless-G Access Point with Power Over Ethernet and Rangebooster Bytes Received. This shows the number of bytes received for each wireless network. Bytes Sent. This shows the number of bytes sent for each wireless network. Error Packets Received. This shows the number of error packets received for each wireless network. Drop Received Packets.

  • Page 49: Appendix A: Troubleshooting

    This appendix provides solutions to problems that may occur during the installation and operation of the Wireless-G Access Point with Power Over Ethernet. Read the descriptions below to help solve your problems. If you can't find an answer here, check the Linksys website at www.linksys.com. Frequently Asked Questions Can the Access Point act as my DHCP Server? No.
  • Page 50 Wireless-G Access Point with Power Over Ethernet and Rangebooster What IEEE 802.11g features are supported? The product supports the following IEEE 802.11g functions: • CSMA/CA plus Acknowledge protocol • OFDM protocol • Multi-Channel Roaming • Automatic Rate Selection • RTS/CTS feature •...
  • Page 51 Can Linksys wireless products support file and printer sharing? Linksys wireless products perform the same function as LAN products. Therefore, Linksys wireless products can work with NetWare, Windows NT/2000, or other LAN operating systems to support printer or file sharing.
  • Page 52 Wireless-G Access Point with Power Over Ethernet and Rangebooster What is a MAC Address? The Media Access Control (MAC) address is a unique number assigned by the manufacturer to any Ethernet networking device, such as a network adapter, that allows the network to identify it at the hardware level. For all practical purposes, this number is usually permanent.

  • Page 53: Appendix B: Wireless Security

    Wireless-G Access Point with Power Over Ethernet and Rangebooster Appendix B: Wireless Security Linksys wants to make wireless networking as safe and easy for you as possible. The current generation of Linksys products provide several network security features, but they require specific action on your part for implementation.
  • Page 54 This includes hackers. So, don’t broadcast the SSID. Wireless networking products come with a default SSID set by the factory. (The Linksys default SSID is “linksys”.) Hackers know these defaults and can check these against your network. Change your SSID to something unique and not something related to your company or the networking products you use.
  • Page 55 These security recommendations should help keep your mind at ease while you are enjoying the most flexible and convenient technology Linksys has to offer. Appendix B: Wireless Security Security Threats Facing Wireless Networks...

  • Page 56: Appendix C: Upgrading Firmware

    The Access Point's firmware is upgraded through the web-based utility’s Administration - Firmware Upgrade tab. Follow these instructions: 1. Download the firmware upgrade file from the Linksys website, www.linksys.com. 2. Extract the firmware upgrade file on your computer. 3. Open the Access Point’s web-based utility.

  • Page 57: Appendix D: Windows Help

    Wireless-G Access Point with Power Over Ethernet and Rangebooster Appendix D: Windows Help Almost all wireless products require Microsoft Windows. Windows is the most used operating system in the world and comes with many features that help make networking easier. These features can be accessed through Windows Help and are described in this appendix.

  • Page 58: Appendix E: Glossary

    This glossary contains some basic networking terms you may come across when using this product. For more advanced terms, see the complete Linksys glossary at http://www.linksys.com/glossary. Access Point - A device that allows wireless-equipped computers and other devices to communicate with a wired network.
  • Page 59 Wireless-G Access Point with Power Over Ethernet and Rangebooster DMZ (Demilitarized Zone) - Removes the Router's firewall protection from one PC, allowing it to be “seen” from the Internet. DNS (Domain Name Server) - The IP address of your ISP's server, which translates the names of websites into IP addresses.
  • Page 60 Passphrase - Used much like a password, a passphrase simplifies the WEP encryption process by automatically generating the WEP encryption keys for Linksys products. Ping (Packet INternet Groper) - An Internet utility used to determine whether a particular IP address is online.
  • Page 61 Wireless-G Access Point with Power Over Ethernet and Rangebooster RJ-45 (Registered Jack-45) - An Ethernet connector that holds up to eight wires. Roaming - The ability to take a wireless device from one access point's range to another without losing the connection.
  • Page 62 Wireless-G Access Point with Power Over Ethernet and Rangebooster TKIP (Temporal Key Integrity Protocol) - a wireless encryption protocol that provides dynamic encryption keys for each packet transmitted. Topology - The physical layout of a network. TX Rate - Transmission Rate. Upgrade - To replace existing software or firmware with a newer version.

  • Page 63: Appendix F: Specifications

    Wireless-G Access Point with Power Over Ethernet and Rangebooster Appendix F: Specifications Model WAP200 Standards IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u, IEEE802.3af (Power Over Ethernet), 802.1p (QoS priority), 802.1q (VLAN), 802.1X (Security Authentication), 802.11i - Ready (Security WPA2), 802.11e - Ready (Wireless QoS), 802.11F (Wireless Roaming) Ports 10/100 Base-T Ethernet, 12 VDC Power...
  • Page 64 Wireless-G Access Point with Power Over Ethernet and Rangebooster DHCP DHCP Client Operating Modes Access Point Access Point Mode, point-to-point Bridge Mode, point-to-multipoint Bridge Mode, Repeater Mode Wireless Spec/Modulation Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM Channels Operating Channels: 11 North America, 13 Most of Europe (ETSI and Japan) # of Internal Ant.
  • Page 65 Wireless-G Access Point with Power Over Ethernet and Rangebooster Wireless Security Monitor Scan and Classify wireless devices in the network. Reports new clients and APs joining the network and suspicious network events. (working together with 200 Business series client cards) Quality of Service 4 queues WMM Wireless priority...

  • Page 66: Appendix G: Warranty Information

    Your exclusive remedy and Linksys' entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates.

  • Page 67: Appendix H: Regulatory Information

    Wireless-G Access Point with Power Over Ethernet and Rangebooster Appendix H: Regulatory Information FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 68 Wireless-G Access Point with Power Over Ethernet and Rangebooster Industry Canada Statement This device complies with Industry Canada ICES-003 and RSS210 rules. Déclaration d’Industrie Canada Cet appareil est conforme aux normes NMB003 et RSS210 d'Industrie Canada. Industry Canada Statement Operation is subject to the following two conditions: 1.
  • Page 69 User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products. Consumers are required to comply with this notice for all electronic products bearing the following symbol:...
  • Page 70 Wireless-G Access Point with Power Over Ethernet and Rangebooster Appendix H: Regulatory Information...
  • Page 71 Wireless-G Access Point with Power Over Ethernet and Rangebooster Appendix H: Regulatory Information...
  • Page 72 Wireless-G Access Point with Power Over Ethernet and Rangebooster Appendix H: Regulatory Information...
  • Page 73 Wireless-G Access Point with Power Over Ethernet and Rangebooster For more information, visit www.linksys.com. Appendix H: Regulatory Information...

  • Page 74: Appendix I: Contact Information

    Can't find information about a product you want to buy on the web? Do you want to know more about networking with Linksys products? Give our advice line a call at: 800-546-5797 (LINKSYS) Or fax your request in to:...

This manual is also suitable for:

Wap200e - wireless-g access pointWap200Linksys business seriesLinksys wap200rf

Table of Contents