Advertisement
Advertisement
Table of Contents
Related Manuals for D-Link KVM-221 - KVM / Audio Switch
Summary of Contents for D-Link KVM-221 - KVM / Audio Switch
- Page 1 Wireless Internet Camera Wireless G USB 2.0 Adapter with 3G Mobile Video...
-
Page 2: System Requirements
• Speakers or Headphones • VGA or Better Monitor Package Contents D-Link KVM-221 2 Sets of KVM Cables KVM Switch Quick Install Guide If any of the above items are missing, please contact your reseller. D-Link KVM-1 Quick Install Guide... -
Page 3: Hardware Overview
Mouse Port Keyboard Port Audio Jack KVM Cables Plug the cables from your keyboard, monitor, sound card, and mouse into the KVM switch, and plug the supplied cables from your KVM switch into your computers. D-Link KVM-1 Quick Install Guide... - Page 4 (Computer 1), and plug the cable from PC 2 into your second computer (Computer 2). Connect the audio and VGA cable to your first computer (Computer 1). Connect your audio or VGA cable to your second computer (Computer 2). D-Link KVM-1 Quick Install Guide...
-
Page 5: Hardware Installation
Attach your headphone or speakers to the green audio jack located on the KVM-221. Attach your monitor’s 15-pin VGA connector to the blue VGA port located on the KVM-221. Attach your computer’s keyboard connector keyboard port located KVM-221. D-Link KVM-1 Quick Install Guide... - Page 6 USB mouse port located on the KVM-221. Note: Make sure that all your computers are turned OFF before installing the KVM-221 to avoid mouse and keyboard errors when booting up your computers. D-Link KVM-1 Quick Install Guide...
- Page 7 Plug the KVM-221’s KVM USB cable into an available USB port on the back of your computer case. Note: Repeat these steps to attach the cables connected from the PC 2 port of the KVM-221 to Computer D-Link KVM-1 Quick Install Guide...
- Page 8 Hardware Installation Power ON both of your attached computers after you have completed the KVM-221 installation. Once you’ve completed your KVM-221 installation, your connections may appear similar to the diagram below. D-Link KVM-1 Quick Install Guide...
- Page 9 Scroll Lock + Scroll Lock + M : Resets the mouse and keyboard. Scroll Lock + Scroll Lock + S : Auto-Scan Mode automatically switches between computers every 10 seconds (Monitor Only). Spacebar : Exits Auto Scan Mode. D-Link KVM-1 Quick Install Guide...
-
Page 10: Troubleshooting
• Do not move the mouse or press any mouse buttons when switching from one PC to another. • Try resetting the mouse by unplugging it from the KVM-221 for about 3 seconds and then reconnect. D-Link KVM-1 Quick Install Guide... - Page 11 Check that the green coated audio cable is plugged into the correct audio jack (green colored). • Verify that the speaker works when plugged directly into the computer. • Try using a different set of speakers. D-Link KVM-1 Quick Install Guide...
-
Page 12: Technical Support
Copyright ©00 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link, the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the packaging.