Table of Contents
Advertisement
Chapter 5
Configuring the Router
Current interface summary
Interface
GigabitEthernet0/0
GigabitEthernet0/1
GigabitEthernet0/2
SSLVPN-VIF0
Any interface listed with OK? value "NO" does not have a valid configuration
Select one of the available interfaces for connecting the router to the management network:
Step 9
Enter interface name used to connect to the management network from the above interface
summary: gigabitethernet0/1
Step 10
Respond to the following prompts as appropriate for your network:
Configuring interface GigabitEthernet0/1:
Configure IP on this interface? [yes]: yes
IP address for this interface [10.10.10.12]:
Subnet mask for this interface [255.0.0.0] : 255.255.255.0
Class A network is 10.0.0.0, 24 subnet bits; mask is /24
The system creates the following configuration command script:
hostname myrouter
enable secret 5 $1$t/Dj$yAeGKviLLZNOBX0b9eifO0 enable password cisco123 line vty 0 4
password cisco snmp-server community public !
no ip routing
!
interface GigabitEthernet0/0
shutdown
no ip address
!
interface GigabitEthernet0/1
no shutdown
ip address 10.10.10.12 255.255.255.0
!
interface GigabitEthernet0/2
shutdown
no ip address
!
end
Respond to the following prompts. Select 2 to save the initial configuration:
Step 11
[0] Go to the IOS command prompt without saving this config.
[1] Return back to the setup without saving this config.
[2] Save this configuration to nvram and exit.
Enter your selection [2]: 2
Building configuration...
Use the enabled mode 'configure' command to modify this configuration.
Press RETURN to get started! RETURN
The system displays the user prompt:
myrouter>
The facility prompts you to save the configuration. Enter yes to save the configuration and return to the
Step 12
user EXEC prompt
Use this configuration? {yes/no} : yes
OL-19084-02
IP-Address
unassigned
10.10.10.12
unassigned
unassigned
.
(Router>)
Performing the Initial Configuration on the Router
OK? Method Status
YES NVRAM
administratively down down
YES DHCP
up
YES NVRAM
administratively down down
NO
unset
up
Cisco 1900 Series Hardware Installation
Protocol
up
5-5
Hide quick links:
Advertisement
Table of Contents
