Table of Contents
Advertisement
Appendix B
Appendix B: VPN Tunnel
Overview
This appendix describes an example of how to set up a
VPN tunnel between two VPN Routers. Refer to "Chapter 3:
Advanced Configuration" for more information.
Instructions
1.
Open your web browser, and enter
Address field. Press Enter.
2.
On the login screen, enter the password you have set
up for the Router (the default is admin). Press Enter.
3.
Click the
Security > VPN tab.
4.
For the Select Tunnel Entry setting, select an entry
number.
5.
For the VPN Tunnel setting, select
6.
Enter a Tunnel Name. This name should be unique for
this particular tunnel.
7.
For the Local Secure Group setting, select
Then complete the IP and Mask fields (refer to your
local network's IP address scheme).
8.
For the Remote Secure Group setting, select
Then enter the IP address of the remote computer on
the other end of the tunnel.
9.
For the Remote Security Gateway setting, select
Addr. Then enter the Internet IP address of the remote
VPN Router.
10.
Select the Encryption and Authentication methods for
the tunnel you want to create. Make sure both ends of
the tunnel use the same methods.
11.
For the Perfect Forward Secrecy (PFS) setting, select
Enabled. Then complete the Pre-shared Key and Key
Lifetime fields.
Save Settings.
12.
Click
13.
To test your connection, click
EtherFast Cable/DSL VPN Router with 4-Port Switch
192.168.1.1 in the
Enable.
Subnet.
IP Addr.
IP
Connect.
VPN Tunnel
21
Advertisement
Table of Contents
