Setup, cont. Any Mode chosen for Volume/Mute control MUST have its own Volume/Mute function or the Volume/ Mute buttons will do nothing. Setting ALL Volume/Mute Control to any one Mode This.routine.can.set.all.Modes.to.“punch-through”. to.any.one.chosen.Mode.for.Volume/Mute.button. control.without.the.needing.to.change.to.that.Mode. 1... Press.and.hold.the.SETUP button.until.the.red. indicator.turns.on,.then.release.the.button. 2... Press.and.hold.the.MUTE.button.until.the.red. indicator.blinks.off,.then.release.the.button. 3... Press.and.release.the.desired.Mode.button.(TV,. DVD,.etc.)..For.Volume/Mute.control,.the.red.
Troubleshooting Remote does not operate your product. •.. Press.the.mode.button.of.the.product.you.want.to. control. •.. Program.the.remote.with.a.new.code. •.. Install.new.batteries..(You.might.have.to. reprogram.your.remote.after.installing.new. batteries.) •.. Remote.may.not.be.compatible.with.your.product. Remote does not operate some features of your product. •.. Program.remote.with.a.new.code. •.. Remote.may.not.be.able.to.operate.all.features.of. your.product.or.button.names.might.be.different. than.your.product. Red Indicator blinks after you program a product code.