Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Panasonic PT-D5000ELS
Summary of Contents for Panasonic PT-D5000ELS
- Page 1 Functional Instructions DLP™Based Projector Commercial Use PT-DZ6710 Model No. PT-DZ6700 PT-DW6300 PT-D6000 PT-D5000 The information of these instructions are shared use with multiple models of DZ6710 series, DZ6700 series, DW6300 series, D6000 series and D5000 series. TQBJ0299-3 NGLISH...
-
Page 2: Table Of Contents
Contents ∗ LAMP POWER ............. 29 Getting Started STANDBY MODE ............29 RS-232C ................. 29 REMOTE2 MODE ............29 Setting up..............3 STATUS ................30 Screen size and throw distance........3 FILTER COUNTER RESET ..........30 Geometric adjustment ............8 NO SIGNAL SHUT-OFF ..........30 Front leg adjusters and throwing angle ...... -
Page 3: Setting Up
Setting up Screen size and throw distance When planning the projector and screen geometry, refer to the figures below and the information on the following pages for reference. After the projector is roughly positioned, picture size and vertical picture positioning can be finely adjusted with the powered zoom lens and lens shifting mechanism. -
Page 4: Projection Distance By Projection Lens
Setting up Projection distance by projection lens PT-DZ6710/PT-DZ6700 16:10 (Unit: m) Lens type Optional lens Standard zoom lens Lens names ET-DLE055 ET-DLE150 ET-DLE250 ET-DLE350 ET-DLE450 Height Through ratio 1.8 - 2.4:1 0.8:1 1.3 - 1.9:1 2.3 - 3.6:1 3.6 - 5.4:1 5.5 - 8.6:1 Fixed 0.673... - Page 5 Setting up PT-DW6300 16:10 (Unit: m) Lens type Optional lens Standard zoom lens Lens names Height ET-DLE055 ET-DLE150 ET-DLE250 ET-DLE350 ET-DLE450 Through ratio 1.8 - 2.4:1 0.8:1 1.4 - 2.0:1 2.4 - 3.8:1 3.8 - 5.7:1 5.6 - 9.0:1 Fixed 0.673 1.077 1.92...
- Page 6 Setting up PT-D6000/PT-D5000 16:10 (Unit: m) Lens type Optional lens Standard zoom lens Lens names Height ET-DLE055 ET-DLE150 ET-DLE250 ET-DLE350 ET-DLE450 Through ratio 1.8 - 2.4:1 0.8:1 1.3 - 2.0:1 2.4 - 3.7:1 3.7 - 5.6:1 5.5 - 8.9:1 Fixed 0.762 1.016 1.79...
-
Page 7: Calculation Formulas For Projection Distance By Lens Types
Setting up Calculation formulas for projection distance by lens types Names Type Through ratio Aspect ratio Projection distance formula • PT-DZ6710/PT-DZ6700 = 0.0395 x SD - 0.0744 16:10 = 0.0529 x SD - 0.0734 Standard zoom lens 1.8 - 2.4:1 = 0.0406 x SD - 0.0745 16:9 = 0.0544 x SD - 0.0734... -
Page 8: Geometric Adjustment
Setting up Geometric adjustment VERTICAL KEYSTONE HORIZONTAL KEYSTONE (Side view) (Top view) Screen Screen VERTICAL ARC HORIZONTAL ARC (Side view) (Top view) L2: Projection distance R2: Radius of the circle (Side view) (Top view) Screen Screen L3: Projection distance R3: Radius of the circle Standard ET-DLE055 ET-DLE150... -
Page 9: Front Leg Adjusters And Throwing Angle
Setting up Front leg adjusters and throwing angle You can screw up/down the front leg adjusters to control the angle of the projector for adjusting the throwing angle. STANDBY(RED)/ STANDBY(RED)/ LAMP LAMP TEMP TEMP FILTER FILTER ON(GREEN) ON(GREEN) NOTE: • Heated air comes out of the air exhaust port. Do not touch the air exhaust port directly. NGLISH - 9... -
Page 10: Connections
Connections Before connection to the projector Read and follow the operating and connecting instructions of each peripheral device. The peripheral devices must be turned off. Use cables that match each peripheral device to be connected. If the input signal is affected by signal jitter, the projected image may have poor image quality and timebase correction is effective. -
Page 11: Connecting Example: Computers
Connections Connecting example: Computers Control Computers Projector 1 Projector 2 Control NOTE: • For the specifications of the RGB signals that can be applied from the computer, see the data sheet of the operating instructions that is provided with the projector. •... -
Page 12: Menu Navigation
Menu Navigation Main menu and Sub-menu The menu options are structured and categorised. You can CLOCK PHASE page 19 navigate through the menu with F G I H buttons. See “Menu (Default: 16) Navigation” on page 12. GEOMETRY page 19 The underlined items are factory default settings. -
Page 13: Test Pattern
Menu Navigation INSTALLATION page 28 DISPLAY OPTION FRONT/FLOOR FRONT/CEILING REAR/FLOOR REAR/CEILING COLOR MATCHING * page 25 HIGH ALTITUDE MODE page 28 3 COLORS 7 COLORS MEASURED COOLING CONDITION page 28 COLOR CORRECTION page 25 FLOOR SETTING USER VERTICAL DOWN SETTING CONTRAST MODE * page 25 CEILING SETTING... - Page 14 Menu Navigation SECURITY NETWORK SECURITY PASSWORD page 35 NETWORK SETUP page 37 HOST NAME DHCP SECURITY PASSWORD CHANGE IP ADDRESS SUBNET MASK DEFAULT GATEWAY STORE page 35 NETWORK CONTROL page 37 DISPLAY SETTING page 35 WEB CONTROL TEXT PJLink CONTROL LOGO1 LOGO2 COMMAND CONTROL...
-
Page 15: Navigating Through The Menu
Menu Navigation Navigating through the menu Displaying the main menu Operating procedure Press the MENU button to display the main menu. 1. Press F G to scroll to the required main menu item and press the ENTER button to select. The selected item is highlighted in orange and the sub- MAIN MENU menu is displayed. -
Page 16: Picture Menu
PICTURE menu COLOR Remote control You can adjust the colour saturation of the projected image. Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value. Lighter Darker See “Navigating through the menu” on page 15. Setting range: -31 to +31 See “Main menu and Sub-menu”... -
Page 17: White Gain
PICTURE menu WHITE GAIN NOISE REDUCTION You can adjust the brightness of white area of the image. Call You can select the automatic noise reduction system strength. up the bar scale by pressing I, H or the ENTER button, and Press I H to cycle through the options. -
Page 18: Position Menu
POSITION menu S1 AUTO Remote control Detects signals which contain S1 signal in input signal, and automatically switch the aspect ratio between 4:3 and 16:9. Effective with S-VIDEO (NTSC) signals. VID AUTO(PRI.) Detects signals which contain video ID or S1 signal in input signal, and automatically switch the aspect ratio See “Navigating through the menu”... -
Page 19: Zoom
POSITION menu Menu items displaying pattern depends on signals Signals from RGB 1 IN/RGB 2 IN/DVI-D IN and SDI (PT-DZ6710 only) DEFAULT H THROUGH H 16:9 H 4:3 H H-FIT H V-FIT H HV-FIT H DEFAULT Signals from S-VIDEO IN VID AUTO H S1 AUTO H VID AUTO(PRI.) H THROUGH H 16:9 H 4:3 H H-FIT H V-FIT H HV-FIT H VID AUTO Signals from other terminals VID AUTO H THROUGH H 16:9 H 4:3 H H-FIT H V-FIT H HV-FIT H VID AUTO... - Page 20 POSITION menu GEOMETRY:KEYSTONE GEOMETRY:CURVED Select KEYSTONE and press the ENTER button to Select CURVED and press the ENTER button to display display the options. the options. VERTICAL KEYSTONE LENS THROW RATIO Press I H to adjust throw ratio of the attached lens. VERTICAL KEYSTONE VERTICAL SUB KEYSTONE HORIZONTAL KEYSTONE...
-
Page 21: Keystone
POSITION menu KEYSTONE (PT-DZ6700/PT-DW6300/PT-D6000/PT-D5000 only) If the projector is aligned non-perpendicularly to the screen, or if the projection screen has an angled surface, you can correct keystone. VERTICAL KEYSTONE VERTICAL SUB KEYSTONE LINEARITY NOTE: • When KEYSTONE setting is set, displayed menu or startup logo might be projected outside of the actual image area. -
Page 22: Advanced Menu
ADVANCED MENU Setting range Remote control Models Vertical Horizontal PT-DZ6710/PT-DZ6700 0 - 599 0 - 959 PT-DW6300 0 - 399 0 - 639 PT-D6000/PT-D5000 0 - 383 0 - 511 See “Navigating through the menu” on page 15. INPUT RESOLUTION See “Main menu and Sub-menu”... -
Page 23: Edge Blending
ADVANCED MENU Adjusting with colour markers EDGE BLENDING You can adjust with colour markers, which indicate the overlapping area. (Not available for PT-D5000) 1. Press G several times until MARKER is displayed. The built-in edge blending feature allows multiple projector 2. -
Page 24: Raster Position
ADVANCED MENU Adjusting brightness around Projection range Edge blending width borderline of the image area (right) You can adjust brightness around borderline of the Bright adjustment image area to minimise the difference between the (right) overlapping area and the image. Select BRIGHT ADJUST and press the ENTER button. -
Page 25: Display Option Menu
DISPLAY OPTION menu COLOR CORRECTION Remote control You can adjust 6 colours and register the result for each of 4 types of signals, VIDEO, S-VIDEO, RGB and YP Deactive Adjust 6 colours, RED, GREEN, USER BLUE, CYAN, MAGENTA and See “Navigating through the menu” on page 15. YELLOW. -
Page 26: Auto Setup
DISPLAY OPTION menu AUTO SETUP ON-SCREEN DISPLAY OSD POSITION You can change the AUTO SETUP feature for specific signals. Press I H to cycle through the options and press the ENTER You can change the displaying position of the main button to perform the AUTO SETUP. -
Page 27: Back Color
Displays solid blue. SIDE BY SIDE LOGO1 Displays user defined image. LOGO2 Displays PANASONIC logo. (PT-DZ6710/PT-DZ6700/PT-DW6300 only) You can project the image and another source of image at the NOTE: same time in double window style. 1. Press the ENTER button. -
Page 28: Projector Setup Menu
PROJECTOR SETUP menu HIGH ALTITUDE MODE Remote control If you use the projector at high elevation, the HIGH ALTITUDE MODE setting needs to be ON to set the fan speed high. Press I H to select the required option. The fan speed is low. The fan speed is high. -
Page 29: Lamp Select
PROJECTOR SETUP menu LAMP SELECT LAMP POWER You can select a lamp lighting pattern for using environment. (Not available for PT-D5000) Press I H to cycle through options, and the ENTER button. The luminance of the projection lamp can be changed depending on user’s needs or the viewing conditions. -
Page 30: Status
PROJECTOR SETUP menu STATUS FILTER COUNTER RESET You can see the status of the projector about the following After you replaced the Auto Cleaning Filter (ACF), items. REMAINING FILTER of STATUS need to be reset to "0". 1. Press the ENTER button. 2. -
Page 31: Date And Time
PROJECTOR SETUP menu DATE AND TIME INITIALIZE You can set the time zone and correct the time and date of You can reset the settings to the factory defaults by the internal clock. selected mode. 1. Select the required mode to initialise. 2. -
Page 32: Test Pattern
TEST PATTERN Remote control See “Navigating through the menu” on page 15. See “Main menu and Sub-menu” on page 12. TEST PATTERN You can use 7 test patterns to adjust the signal image. 1. Display an input signal image. 2. Press the MENU button to display the main menu. 3. -
Page 33: Signal List
SIGNAL LIST Displaying the signal list and the status Remote control 1. Select SIGNAL LIST in the main menu. 2. Press the ENTER button. Display the REGISTERED SIGNAL LIST. 3. Select the required signal data. 4. Press the ENTER button. Displays the REGISTERED SIGNAL STATUS. -
Page 34: Managing The Sub Memory List
SIGNAL LIST Managing the sub memory list Displaying the sub memory list and restoring the settings You can restore the sub memory data when using 1. Press I or H while the menu is cleared from the screen signals from the same input source. Sub memory data after adjustment. -
Page 35: Security Menu
Unless you perform the correct password operation, all Displays user defined image over the LOGO1 of the button controls will be disabled except the POWER image. STANDBY and SHUTTER buttons. Displays PANASONIC logo over the LOGO2 image. Deactive TEXT CHANGE Active... -
Page 36: Menu Lock
SECURITY menu MENU LOCK CONTROL DEVICE SETUP CONTROL PANEL You can lock the MENU button function and the password will be asked to display the menu every time. You can disable the control panel buttons on the projector body. Press I or H to switch the option. Deactivate the MENU LOCK system. -
Page 37: Network Menu
NETWORK menu NETWORK CONTROL Remote control You can switch on/off the projector network controlling method. 1. Select the required item to change. 2. Press the ENTER button. 3. Use I H to change the settings. 4. Select STORE and press the ENTER button. The confirmation screen will be displayed. -
Page 38: Technical Information
Technical Information Network connection You can control the projector from a computer with web browser, for adjusting the menu settings, displaying status of the projector and transmission of E-mail messages if there is a problem with the projector. Computer Projector LAN cable (straight) LAN cable (straight) LAN switch... -
Page 39: Accessing With The Web Browser
See “NETWORK STATUS” on page 37. 3. Enter your user name and password. The factory default settings are “user1” (user privileges) or “admin1” (administrator privileges) for the user name and panasonic (lowercase) for the password. 2. Enter User name and Password. Administrator account Current setting Enter the current user name. -
Page 40: Projector Control
Technical Information Projector Control User account New setting Basic control Enter new user name. User name Click the Basic control tab on the top. Enter new password. Password Enter the new password again. Password(Retype) Indicates projecting status. Even when the screen is cleared by pressing the ON SCREEN button of the remote control, the 3. -
Page 41: Ping Test
Technical Information Ping test Web browser buttons Remote control buttons Click the Ping test tag on the top. FUNCTION (Assignable functions SUB MEMORY/SYSTEM in the menu) DAYLIGHT VIEW/FREEZE/ See “FUNCTION BUTTON” on SIDE BY SIDE page 30. *1. See the operation instruction booklet that is provided with the projector. - Page 42 Technical Information E-mail set up Items Description Click the E-mail set up tag on the top. When all E-MAIL ADDRESS 1/E-MAIL ADDRESS 2 options are filled, click Submit. Register the recipient E-mail address. E-MAIL ADDRESS 1/ Available to register up to 2 E-mail E-MAIL ADDRESS 2 address.
-
Page 43: Projector Status
Technical Information STATUS Parameter Description Trouble has occurred in the Projector status MAIN CPU BUS microcomputer circuitry. Consult your Click the Projector status tab on the top. dealer. Trouble has occurred in the fan or its PROJECTOR TYPE Displays the type of projector. drive circuit. -
Page 44: Pjlink Tm Protocol
NAME ? Projector name query The name set for PROJECTOR NAME in NETWORK menu. INF1 ? Manufacturer name query “Panasonic” is returned. INF2 ? Model name query “DZ6710, DZ6700, DW6300, D6000 or D5000 is returned. INF0 ? Other information query Information such as version number is returned. -
Page 45: Serial Terminal
Technical Information Serial terminal The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connecter. Connection Single projector Connecting terminals on projector Computer... -
Page 46: Basic Format
Technical Information Basic format I 1 I 2 (2 bytes) Semicolon Colon (1byte) (1byte) 2 ID characters Parameter (2 bytes) (undefined length) Start ZZ, 01 to 64 and 0A to 0Z 3 command characters (1 byte) ID designate (3 bytes) (1 byte) NOTE: •... -
Page 47: Remote 2 In Terminal
Technical Information REMOTE 2 IN terminal Using the REMOTE 2 IN terminal provided on the connection terminals of the main unit, it is possible to operate the projector from a control panel etc. furnished in a distant location where infrared remote control signal cannot be received. -
Page 48: Side By Side Function Signal Combination Table
Technical Information SIDE BY SIDE function signal combination table (PT-DZ6710/PT-DZ6700/PT-DW6300 only) Side by Side function signal combination table Main image RGB1 RGB2 DVI-D VIDEO S-VIDEO Still Movie Still Movie Still Movie Sub image Still RGB1 Movie Still RGB2 Movie VIDEO S-VIDEO Still DVI-D... -
Page 49: Trademark Acknowledgements
Technical Information Trademark acknowledgements ® ® Microsoft and Microsoft logos, Windows, Windows XP, and Windows Vista are the registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Other types of names such as company names and product names appearing in this instruction manual are ®... -
Page 50: Index
Index ADVANCED MENU ............22 LAMP POWER ..............29 AI ..................17 LAMP RELAY ..............29 ASPECT ................. 18 LAMP SELECT ............... 29 AUTO SETUP ..............26 LOAD ALL USERS DATA ..........31 AUTO SIGNAL ............... 25 Menu ..............15 BACK COLOR .............. - Page 51 Index Serial ............... 46 Basic format ............ 46 Cable specifications ..........45 Communication settings ............46 Control commands ............45 Pin assignments Serial terminal ..............45 SERVICE PASSWORD ..........31 SHARPNESS ..............17 SHIFT ................18 SIDE BY SIDE ..............27 ............
- Page 52 Printed in Japan P0209-5069F...