HP 245161-B22 - 10642 42U Rack Shock Pallet Installation Instructions
Ballast rack option kit
Hide thumbs
Also See for 245161-B22 - 10642 42U Rack Shock Pallet:
- Reference manual (75 pages) ,
- Best practices manual (48 pages) ,
- Installation instructions (4 pages)
Advertisement
Quick Links
HP Ballast Rack
Option Kit
Installation Instructions
© Copyright (2004-2006) Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
July 2006 (Third Edition)
Part Number 142559-003
About this device
The HP Ballast Rack Option Kit provides additional stability
with single-rack installations.
Kit contents
This kit contains the following items:
Ballast assembly (2)
M6 screws (10)
Cage nuts (10)
This kit may contain extra hardware for your convenience.
Required tools
The following tools are required for installation:
Cage nut insertion tool (included in your original rack
hardware kit)
One of the following screwdrivers:
Flathead screwdriver
T-25 Torx driver
Rack considerations
This symbol indicates that the
component exceeds the recommended
weight for one individual to
20.41 kg
handle safely.
45 lb
WARNING:
personal injury or damage to the
equipment, observe local occupational
health and safety requirements and
guidelines for manual
material handling.
WARNING: To reduce the risk of personal
injury or damage to the equipment,
be sure that:
The leveling feet are extended to the
floor.
The full weight of the rack rests on the
leveling feet.
The stabilizing feet are attached to the
rack if it is a single-rack installation.
The racks are coupled together in
multiple-rack installations.
Only one component is extended at a
time. A rack may become unstable if
more than one component is extended
for any reason.
To reduce the risk of
Advertisement
Related Manuals for HP 245161-B22 - 10642 42U Rack Shock Pallet
Summary of Contents for HP 245161-B22 - 10642 42U Rack Shock Pallet
-
Page 1: Kit Contents
About this device HP Ballast Rack Option Kit The HP Ballast Rack Option Kit provides additional stability with single-rack installations. Installation Instructions Kit contents This kit contains the following items: Ballast assembly (2) M6 screws (10) Cage nuts (10) This kit may contain extra hardware for your convenience. Required tools The following tools are required for installation: Cage nut insertion tool (included in your original rack... - Page 2 Installing the ballast rack Insert the M6 screws into one side of the ballast assembly to secure it to the rack. option kit HP recommends installing a single ballast assembly as close to the bottom of the rack as possible. Occasionally, more than one ballast rack option kit might be necessary.