Cisco 7906G - Unified IP Phone VoIP Administration Manual page 129
Unified ip phone cisco unified communications manager 6.1
Hide thumbs
Also See for 7906G - Unified IP Phone VoIP:
- Administration manual (260 pages) ,
- User manual (112 pages) ,
- User giude (90 pages)
Table of Contents
Advertisement
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Table 4-16
Network Configuration Menu Options (continued)
Option
Description
Log Server
Indicates the IP address and port of the remote
logging machine to which the phone sends log
messages. These log messages help in
debugging the peer to peer image distribution
feature.
Note
CDP: PC Port
Indicates whether CDP is enabled on the PC port
(default is enabled).
(applies to
7911G only)
Enable CDP on the PC port when Cisco VT
Advantage/Unified Video Advantage (CVTA) is
connected to the PC port. CVTA does not work
without CDP interaction with the phone.
Note
Note
LLDP: PC Port
Enables and disables Link Layer Discovery
Protocol (LLDP) on the PC port. Use this setting
to force the phone to use a specific discovery
protocol, which should match the protocol
supported by the switch. Settings include:
•
•
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
OL-14585-01
The remote logging setting does not
affect the sharing log messages sent to
the phone log.
When CDP is disabled in Cisco Unified
Communications Manager, a warning is
displayed, indicating that disabling CDP
on the PC port prevents CVTA from
working.
The current PC and switch port CDP
values are shown on the Settings menu.
Enabled—default
Disabled
Device Configuration Menu
To Change
Use Cisco Unified
Communications Manager
Administration, and choose
Device > Phone > Phone
Configuration.
Use Cisco Unified
Communications Manager
Administration, and choose
Device > Phone.
Use Cisco Unified
Communications Manager
Administration, and choose
Device > Phone > Phone
Configuration
4-37
Advertisement
Table of Contents
Troubleshooting
