NEC VERSABAY IV DRIVE Manual

Download this manual

NEC Versa

VersaBay IV Drive

Congratulations on purchasing an NEC

computer! Use this document if you have one of the following VersaBay IV drives:

CD-ROM drive

CD-RW drive

DVD-ROM drive

Combination DVD/CD-RW drive

Read this document for information about:

NEC VersaBay IV drive features

Removing a device from the VersaBay IV slot

Installing your new drive in the VersaBay IV slot

Finding further information about your NEC VersaBay IV drive

Note

For details on installing any software that ships on CD with your drive, see the sheet(s)

packaged with the CD.

NEC VersaBay IV Drive Features

See the following figures for feature locations on NEC VersaBay IV drives. Features are

described after the figures. (Note: your drive may look slightly different, or have slightly

different features.)

Typical CD-ROM drive features

A – VersaBay IV Drive

B – Drive Status LED

C – Disc Eject Button

Typical DVD-ROM drive, CD-RW drive, or

combination DVD/CD-RW drive features

A – VersaBay IV Drive

B – Disc Eject Button

C – Drive Status LED

VersaBay™ IV drive for your NEC Versa

D – Emergency Eject Hole

E – Device Latch/Eject Button

D – Emergency Eject Hole

E – Device Latch/Eject Button

NEC VersaBay IV Drive 1

notebook

Page 1 For details on installing any software that ships on CD with your drive, see the sheet(s) packaged with the CD. NEC VersaBay IV Drive Features See the following figures for feature locations on NEC VersaBay IV drives. Features are described after the figures. (Note: your drive may look slightly different, or have slightly different features.) Typical CD-ROM drive features A –...
Page 2 Disc Eject Button — ejects the CD tray. Press this button when power is on to insert a CD into or remove a CD from the drive. Status LED — lights during data read operations. Do not eject the CD or turn off the NEC Versa notebook when the indicator is lit.
Page 3 Locate the NEC VersaBay IV release latch to the right of the VersaBay IV slot. Flip the latch to the open position. Align the drive in the NEC VersaBay IV slot and push it in until it fits securely into the bay. Inserting an NEC VersaBay IV drive Press the latch back to the locked position.
Page 4: Further Information
Information in this publication is subject to change without notice. NEC is a registered trademark and Versa is a U.S. registered trademark of NEC Corporation and/or one or more of its subsidiaries. Both are used under license. Microsoft and Windows are registered trademarks of Microsoft Corporation.