hit counter script

Ip Addresses; Host Names - Cisco WS-C3560-48PS-S Software Configuration Manual

Software configuration guide
Hide thumbs Also See for WS-C3560-48PS-S:
Table of Contents

Advertisement

Chapter 5
Clustering Switches
When the previously active cluster command switch resumes its active role, it receives a copy of the
latest cluster configuration from the active cluster command switch, including members that were added
while it was down. The active cluster command switch sends a copy of the cluster configuration to the
cluster standby group.

IP Addresses

You must assign IP information to a cluster command switch. You can assign more than one IP address
to the cluster command switch, and you can access the cluster through any of the command-switch IP
addresses. If you configure a cluster standby group, you must use the standby-group virtual IP address
to manage the cluster from the active cluster command switch. Using the virtual IP address ensures that
you retain connectivity to the cluster if the active cluster command switch fails and that a standby cluster
command switch becomes the active cluster command switch.
If the active cluster command switch fails and the standby cluster command switch takes over, you must
either use the standby-group virtual IP address or any of the IP addresses available on the new active
cluster command switch to access the cluster.
You can assign an IP address to a cluster-capable switch, but it is not necessary. A cluster member switch
is managed and communicates with other cluster member switches through the command-switch IP
address. If the cluster member switch leaves the cluster and it does not have its own IP address, you then
must assign IP information to it to manage it as a standalone switch.
Note
Changing the cluster command switch IP address ends your CMS session on the switch. Restart your
CMS session by entering the new IP address in the browser Location field (Netscape Communicator) or
Address field (Internet Explorer), as described in the release notes.
For more information about IP addresses, see
Gateway."

Host Names

You do not need to assign a host name to either a cluster command switch or an eligible cluster member.
However, a host name assigned to the cluster command switch can help to identify the switch cluster.
The default host name for the switch is Switch.
If a switch joins a cluster and it does not have a host name, the cluster command switch appends a unique
member number to its own host name and assigns it sequentially as each switch joins the cluster. The
number means the order in which the switch was added to the cluster. For example, a cluster command
switch named eng-cluster could name the fifth cluster member eng-cluster-5.
If a switch has a host name, it retains that name when it joins a cluster. It retains that host name even
after it leaves the cluster.
If a switch received its host name from the cluster command switch, was removed from a cluster, was
then added to a new cluster, and kept the same member number (such as 5), the old host name (such as
eng-cluster-5) is overwritten with the host name of the cluster command switch in the new cluster (such
as mkg-cluster-5). If the switch member number changes in the new cluster (such as 3), the switch retains
the previous name (eng-cluster-5).
78-16156-01
Chapter 4, "Assigning the Switch IP Address and Default
Catalyst 3560 Switch Software Configuration Guide
Planning a Switch Cluster
5-13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents