Table of Contents
Advertisement
Chapter 2
Catalyst 2350 Switch Cisco IOS Commands
boot manual
Use the boot manual global configuration command on a standalone switch to enable manually booting
the switch during the next boot cycle. Use the no form of this command to return to the default setting.
Syntax Description
This command has no arguments or keywords.
Defaults
Manual booting is disabled.
Command Modes
Global configuration
Command History
Release
12.2(46)EY
Usage Guidelines
The next time you reboot the system, the switch is in boot loader mode, which is shown by the switch:
prompt. To boot up the system, use the boot boot loader command, and specify the name of the bootable
image.
This command changes the setting of the MANUAL_BOOT environment variable. For more
information, see
Related Commands
Command
show boot
OL-19055-01
boot manual
no boot manual
Modification
This command was introduced.
Appendix A, "Catalyst 2350 Switch Boot Loader Commands."
Description
Displays the settings of the boot environment variables.
Catalyst 2350 Switch Command Reference
boot manual
2-15
Advertisement
Chapters
Table of Contents
