hit counter script

Cisco Linksys RT31P2 Administration Manual page 68

Administration guide
Hide thumbs Also See for Linksys RT31P2:
Table of Contents

Advertisement

Ring8 Name
Cfwd Ring Splash
2
Len
Cblk Ring Splash
2
Len
VMWI Ring Splash
Len
VMWI Ring Policy
Ring On No New VM
Notes:
1. Caller number patterns are matched from Ring 1 to Ring 8. The first match (not the closest
match) will be used for alerting the subscriber.
Parameter Name
Ring1 Cadence
Ring2 Cadence
Ring3 Cadence
Ring4 Cadence
Ring5 Cadence
Ring6 Cadence
Ring7 Cadence
Ring8 Cadence
CWT 1 Cadence
CWT2 Cadence
CWT3 Cadence
CWT4 Cadence
CWT5 Cadence
CWT6 Cadence
CWT7 Cadence
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
Name in an INVITE's Alert-Info Header to pick
distinctive ring/CWT 8 for the inbound call
Duration of ring splash when a call is forwarded
(0 – 10.0s)
Duration of ring splash when a call is blocked (0 –
10.0s)
Duration of ring splash when new messages arrive
before the VMWI signal is applied (0 – 10.0s)
The parameter controls when a ring splash is played
when a the VM server sends a SIP NOTIFY message
to the PHONE ADAPTER indicating the status of the
subscriber's mail box. 3 settings are available:
New VM Available – ring as long as there is 1 or more
unread voice mail
New VM Becomes Available – ring when the number
of unread voice mail changes from 0 to non-zero
New VM Arrives – ring when the number of unread
voice mail increases
If enabled, the PHONE ADAPTER will play a ring
splash when the VM server sends SIP NOTIFY
message to the PHONE ADAPTER indicating that
there are no more unread voice mails. Some
equipment requires a short ring to precede the FSK
signal to turn off VMWI lamp
Description
Cadence script for distinctive ring 1
Cadence script for distinctive ring 2
Cadence script for distinctive ring 3
Cadence script for distinctive ring 4
Cadence script for distinctive ring 5
Cadence script for distinctive ring 6
Cadence script for distinctive ring 7
Cadence script for distinctive ring 8
Cadence script for distinctive CWT
(Call Waiting Tone) 1
Cadence script for distinctive CWT 2
Cadence script for distinctive CWT 3
Cadence script for distinctive CWT 4
Cadence script for distinctive CWT 5
Cadence script for distinctive CWT 6
Cadence script for distinctive CWT 7
Str31
Bellcore-r8
Time3
0
Time3
0
Time3
.5
Choice
New VM
Available
Bool
No
Type
Default
CadScript
60(2/4)"
CadScript
60(.3/.2,
1/.2,.3/4)"
CadScript
60(.8/.4,.8/4)
CadScript
60(.4/.2,.3/.2,.8/4)
CadScript
60(.4/.2,.3/.2,.8/4)
CadScript
60(.4/.2,.3/.2,.8/4)
CadScript
60(.4/.2,.3/.2,.8/4)
CadScript
60(.4/.2,.3/.2,.8/4)
CadScript
30(.3/9.7)
CadScript
30(.1/.1, .1/9.7)"
CadScript
30(.1/.1, .1/.1,
.1/9.5)
CadScript
30(.1/.1, .3/.1,
.1/9.3)
CadScript
30(.3/.1,.1/.1,.3/9.
1)
CadScript
30(.1/.1, .3/.1,
.1/9.3)
CadScript
30(.1/.1, .3/.1,
.1/9.3)
68

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rt31p2-naPt31p2Linksys pap2

Table of Contents