Safety Recommendations; Safety With Electricity - Cisco CISCO1841 - 1841 Integrated Services Router Hardware Installation Manual
1800 series integrated services routers
Hide thumbs
Also See for CISCO1841 - 1841 Integrated Services Router:
- Quick start manual (28 pages) ,
- Configuration manual (198 pages)
Table of Contents
Advertisement
Safety Recommendations
Safety Recommendations
Follow these guidelines to ensure general safety:
•
•
•
•
•
•
Safety with Electricity
Warning
This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit. Statement 1028
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001
Warning
Read the installation instructions before connecting the system to the power source. Statement 1004
Follow these guidelines when working on equipment powered by electricity:
•
•
•
•
•
•
•
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
2-2
Keep the chassis area clear and dust-free during and after installation.
If you remove the chassis cover, put it in a safe place.
Keep tools and chassis components away from walk areas.
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll up
your sleeves.
Wear safety glasses when working in conditions that might be hazardous to your eyes.
Do not perform any action that creates a hazard to people or makes the equipment unsafe.
Locate the emergency power-off switch in the room in which you are working. Then, if an electrical
accident occurs, you can quickly turn off the power.
Disconnect all power before doing the following:
Installing or removing a chassis
–
Working near power supplies
–
Look carefully for possible hazards in your work area, such as moist floors, ungrounded power
extension cables, frayed power cords, and missing safety grounds.
Do not work alone if hazardous conditions exist.
Never assume that power is disconnected from a circuit. Always check.
Never open the enclosure of the router's internal power supply.
If an electrical accident occurs, proceed as follows:
Use caution; do not become a victim yourself.
–
Turn off power to the device.
–
If possible, send another person to get medical aid. Otherwise, assess the victim's condition and
–
then call for help.
Determine if the person needs rescue breathing or external cardiac compressions; then take
–
appropriate action.
Chapter 2
Preinstallation Requirements
OL-6425-03
- Quick Links:
- Hardware Features
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
