Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instruction
protection
manual
1.
SAFETY
1.1.
GENERAL POWER TOOL SAFETY
WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all
‰
instructions listed below may result in electric shock, fire and/or serious injury.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
1.2.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
9
DO NOT operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools
8
create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
9
1.3.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify the plug in any way. DO NOT use any adapter plugs with earthed (grounded)
9
power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of
9
electric shock if your body is earthed or grounded.
DO NOT expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
8
1.4.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating a power tool. DO NOT use a power tool while you are
9
tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious
personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes,
9
hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or
9
carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power
9
tool may result in personal injury.
DO NOT overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
8
Dress properly. DO NOT wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery
9
or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
9
Use of dust collection can reduce dust-related hazards.
DO NOT let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless
8
action can cause severe injury within a fraction of a second.
Always wear protective goggles to protect your eyes from injury when using power tools.
9
It is an employer's responsibility to enforce the use of appropriate safety protective equipment by the tool operators and by other
9
persons in the immediate working area.
1.5.
POWER TOOL USE AND CARE
DO NOT force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at
8
the rate for which it was designed.
DO NOT use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is
8
dangerous and must be repaired.
Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any
9
adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to
9
operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition
9
that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
Professional repair only. There are no user replaceable parts.
9
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
9
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and
9
© Jack Sealey Limited
20V SV20 SERIES 1/2"SQ DRIVE IMPACT
WRENCH BODY ONLY 750NM
CP20VPIW.V2
MODEL NO:
Wear ear
Wear
protection
protective
gloves
Original Language Version
CP20VPIW.V2
Issue 2(1)
14/03/24
Advertisement
Related Manuals for Sealey CP20VPIW.V2
Summary of Contents for Sealey CP20VPIW.V2
- Page 1 CP20VPIW.V2 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 DO NOT use a damaged battery. Follow your local regulations relating to disposal of batteries. Use the batteries only with the products specified by Sealey. Installing the batteries to non-compliant products may result in a fire, excessive heat, explosion, or leak of electrolyte.
- Page 3 4.3.3. OVER DISCHARGE PROTECTION When the battery capacity is not enough, the tool stops automatically. In this case, remove the battery from the tool and charge the battery. FIG.3 FIG.4 Original Language Version CP20VPIW.V2 Issue 2(1) 14/03/24 © Jack Sealey Limited...
- Page 4 Tightening when a good finishing is needed. Soft 0 – 1,700/min Tightening when you need fine Assembling furniture. adjustment with small diameter bolt. Tightening with less force to avoid screw thread breakage. Original Language Version CP20VPIW.V2 Issue 2(1) 14/03/24 © Jack Sealey Limited...
- Page 5 DO NOT use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. 7.1. 7.2. Repairs and any other maintenance or adjustment should be performed by authorised service centres, using genuine Sealey replacement parts. Contact Sealey for details of local service centres. WARNING! HAND ARM VIBRATION ‰...
- Page 6 BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.