Model: SH-R80P
Quick Start Guide / Warranty Card
<Prohibited Actions>
- Do not charge device while it is wet with water or other liquids
(drinking water, sweat, sea water, etc.).
- Do not charge device where exposed to water (bathroom, etc.).
TINSEA206AFZZ
1
2
5
10
11
12
6
7
8
9
13
14
15
Part Names
1. Front Camera
10. Sub microphone
2. Earpiece
11. nanoSIM/microSD Tray
3. Volume Up/Down key
12. 3.5mm Earphone Jack
4. Power Key
13. Speaker
5. Fingerprint Sensor (in-screen)
14. USB Type-C Connector
6. Mobile Light
15. Microphone
7. Rear Camera
16. microSD Card
8. NFC
17. nanoSIM Card
9. Wireless charging position
Note: * Please purchase nanoSIM Card and microSD Card separately.
3
* Since parts that generate magnetism are used in the Earpiece, Speaker, Camera, and
Vibrator, please check that no metal pieces (cutter blades, needles) are attached before use.
You may cause injury.
4
* It is recommended that you charge the battery for at least 30 minutes before starting up
your device for the first time.
Important Information
Please read before proceeding
The device must have security features to prevent unauthorized persons from manipulating this
device by making arbitrary changes to the software.
The device itself is designed for use in Singapore. If the device is to be used overseas, it may
violate the laws and regulations of the destination country, so please check before using. This
device supports roaming in the Singapore band and throughout Asia, but please check the
information issued by the respective telecommunications carriers regarding roaming charges.
DO NOT place sharp objects on top of the device, as they may scratch the screen.
DO NOT drop your device or subject it to severe impacts.
Bending the body and pushing the display or keys with extreme force could damage the device.
DO NOT use a pen or any sharp object to tap the screen.
DO NOT expose the device to dirty or dusty environments.
Use this device in the temperature range of 5 °C ~ 35 °C and humidity: 35% ~ 85%.
Charge device in ambient temperature 5 °C ~ 35 °C; Internal Battery may leak/overheat and
performance may deteriorate outside this range.
DO NOT place the device on an uneven or unstable surface.
DO NOT insert any foreign objects into the device.
DO NOT expose the device to strong magnetic or electrical field.
DO NOT use or store the device in a place where it will be exposed to high temperatures, such as
near an open flame or heat-emitting equipment.
Do not let the product submerged into or get wet with the liquids (seawater, water from a swimming
pool, hot water of hot spring, water containing soap, detergent or bath powder, alcohol, soft drink,
seasoning, etc.) other than tap water. Also, do not use it in a place where it gets wet with pet urine.
If it gets wet, immediately rinse it with tap water.
Refer to the device's rating label and be sure to use a charger that meets the rating. Use only the
Accessory Device provided by the manufacturer.
Prolonged use may cause the temperature of the Device to rise. If the Device appears too hot,
avoid direct contact with the skin as this may cause discomfort or burns.
Disconnect the device from an electrical outlet and power off before cleaning the device.
NEVER attempt to connect or disconnect the charger with wet hands.
Clean the touch screen with a soft cloth. If needed, dampen the cloth slightly before cleaning.
Never use abrasives or cleaning solutions.
DO NOT disassemble the device. Only a certified service technician should perform repair.
Please check with your Local Authority or retailer for proper disposal of electronic products.
For USB connection, users must use a USB 2.0 (or higher version) cable.
16
The charger shall be installed near the equipment and shall be easily accessible.
The temperature of the device might increase while the CPU is busy handling resource consuming
17
activities such as high resolution video decoding. The SW protection mechanism will ensure stop charging
whenever the temperature is over the predefined threshold and prepare for shut down if necessary.
Please rest assured.
Use a wireless hands-free system (headphone, headset) with a low power Bluetooth equipment.
Keep your calls short or send a text message (SMS) instead.
This advice applies especially to children, adolescents and pregnant women.
People having active medical implants should preferably keep the device at least 15 cm away from
the implant.
Actual available capacity of user storage and internal memory is less because of the operating
system, software and other functions which utilize part of this capacity. The available capacity may
change with software updates.
The wet body must not be charged.
The security level of face recognition is lower than other methods of screen lock (Pattern, PIN, Password, etc.).
The recognition rate of face recognition is not 100% accurate.
This device uses an organic EL display (OLED). When displaying the same image on the screen for
a long period of time, an afterimage may be left on the screen. This is not a malfunction. To prevent
afterimages from appearing, do not display the same image continuously for a long period of time.
The specified charger is not waterproof.
During fingerprint recognition, the screen brightness and color settings may change slightly.
The charger means both AC charger and wireless charger in the document.
The charger may become hot during charging. Do not keep the charger in contact with your body.
Do not place objects containing metal between the wireless charger and the device.
The wireless reverse charging feature is available based on Qi-standard, but not all devices are
guaranteed charging.
Waterproof: IPX5 / IPX8
Dustproof: IP6X
Safety Precautions for Battery Use
The device battery can not be removed, please do not disassemble.
There is the danger of explosion if disassemble by unauthorized personnel.
Recycle or dispose used batteries according to the local regulations.
Road and Environmental Safety
Turn off the device in areas with a potentially explosive atmosphere or where flammable objects
exist such as gas stations, fuel depots, and chemical plants among others. Sparks from these
areas could cause explosion or fire and result in injury or even death.
Do not use devices while driving a vehicle. Use hands-free devices as an alternative.
Safety in Aircraft
Do not use the device on board an aircraft. The device's network signals may cause interference to the
navigation system. As a safety measurement, it is prohibited to use devices on board in most countries.
Copyright Information
Copyright
©
SHARP CORPORATION, 2012. All rights reserved.
Android is a trademark of Google LLC.
microSD™ is a trademark of SD Card Association.
USB Type-C™ is a trademark of USB Association.
LTE is a trademark of ETSI
All products use in this device and trademarks mentioned herein are trademarks or registered
trademarks of their respective owners.
Intellectual Property Right Information
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
SHARP CORPORATION is under license.
Wi-Fi®, the Wi-Fi CERTIFIED logo and the Wi-Fi logo are trademarks of Wi-Fi Alliance
All technologies and products used in this device are the intellectual property rights owned by
individual owners.
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO") AND/OR (ii) DECODE AVC VIDEO
THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL
ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC
VIDEO.NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C.SEE HTTP://WWW.MPEGLA.COM
Compliance Information
Band
LTE FDD: B1/B3/B7/B8/B28
LTE TDD: B38
5G: n1/n40/n78
Connection
Wi-Fi IEEE 802.11 a/b/g/n/ac/ax (2.4 GHz/5 GHz /6 GHz)
Bluetooth 5.3
NFC
SIM: Dual SIM
UWB
Contents of Accessories
Quick Start Guide / Warranty Card (This document)
AC charger
USB Cable
Protection Film
Quick Switch Adaptor
SIM Eject Pin
Made in China
Design Company : SHARP CORPORATION
Sales Company : SHARP Singapore Electronics Corporation Pte. Ltd.
438B Alexandra Road. #06-02
Alexandra Technopark
Singapore 119968
Complies with
IMDA Standards
DB00855