Page 2
INSTRUCTION MANUAL FOR WINE COOLER MODEL NO. JG45B Thanks for buying our wine cooler, Hope our advanced product will give your wine a different joyful taste. Before use, please read and follow all safety rules and operating instructions.
Page 3
WARNING! To prevent damaging the door gasket, make sure to have the door all the way opened when pulling shelves out of the rail compartment. The appliance must be positioned so that the plug is accessible. Release the electric ...
Page 4
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or injury when using your appliance, WARNING follow these basic precautions: • Read all instructions before using the Wine cooler • DANGER or WARNING: Risk of child entrapment. Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous .
Page 5
INSTALLATION INSTRUCTIONS Before Using Your Wine cooler Remove the exterior and interior packing. • • Before connecting the Wine cooler to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. •...
Page 6
Installing the handle 1. Open the door and carefully pull out the door gasket only at the area where the handle is to be installed. 2. You will be able to see two screws inside the door. 3. Insert the screw cover in the arrow direction (only for full glass door and slim stainless-steel door).
Page 7
ANTI-TIP BRACKET INSTALLATION INSTRUCTIONS WARNING: Please use the anti-tip bracket and following below instruction when FREE-STANDING to avoid the unit TIPPING cause dangerous! Back of the 1. Anti-tip bracket parts list: (FigⅡ①) A: Anti-tip bracket (1pc) B: Hexagon bolt (1pc) C: Hexagon nut (1pc) D: Self-tapping screw (2pcs) E:Expansion screw(1 pc)
Page 8
(2pcs) align Loc C and secure the bracket into wood floor. Move the unit to the align to the bracket Loc A, used B: Hexagon bolt (1pc) and C: Hexagon nut (1pc) to fix. 3.CONCRETE FLOOR installation: (FigⅡ④) After confirm the installed location, choose any hold of Loc D to secure the bracket into the concrete floor Using a concrete bit, drill Φ8mm pilot hold 45~55mm deep.
Page 9
Setting The Temperature Controls When pressing “ ” or “ ” button, the system will be entering the set up mode in the upper or lower • compartment automatically. The LED will flashing and display the setting temperature. Press once the button, the temperature will decrease or increase 1 ℃. When exceeding the minimum value that can be established, it will jump to the highest adjustable temperature value automatically.
Page 10
Shelves Instruction Do not cover shelves with aluminum foil or any other material as this will impede air fl ow inside the cabinet and can adversely affect the interior cabinet temperature. To remove the shelves: 1. Fully extend the shelf. 2.
Page 11
How to change the door opening This appliance has reversible doors but is delivered with a right hinged door. The left hand hinge kit comes with the unit (in the box), should you wish to reverse the hinge on your unit. 1.Lower Hinge(Right) 3.Door Axis 2.Screws...
Page 12
Storage diagram According to the actual configuration of your product, please check the relative Storage diagram. Total: 44 bottles (Max) The most energy-saving configuration requires food box not to be positioned in the product. Installation specifications for built-in purposes ...
Page 13
CARE AND MAINTENANCE Cleaning Your Wine Cooler Turn off the power, unplug the appliance, and remove all items including shelves and rack. • Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 •...
Page 14
PROBLEMS WITH YOUR WINE COOLER/BEVERAGE COOLER? You can solve many common Wine cooler/beverage cooler problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE...