Rep Admin Vlan - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
rep admin vlan
rep admin vlan
Use the rep admin vlan global configuration command to configure a Resilient Ethernet Protocol (REP)
administrative VLAN for REP to transmit hardware flood layer (HFL) messages. Use the no form of this
command to return to the default configuration with VLAN 1 as the administrative VLAN.
Syntax Description
vlan-id
Defaults
The administrative VLAN is VLAN 1.
Command Modes
Global configuration
Command History
Release
12.2(40)SE
Usage Guidelines
If the VLAN does not already exist, this command does not create the VLAN.
To avoid the delay introduced by relaying messages in software for link-failure or VLAN-blocking
notification during load balancing, REP floods packets at the hardware flood layer (HFL) to a regular
multicast address. These messages are flooded to the whole network, not just the REP segment. Switches
that do not belong to the segment treat them as data traffic. Configuring an administrative VLAN for the
whole domain can control flooding of these messages.
If no REP administrative VLAN is configured, the default is VLAN 1.
There can be only one administrative VLAN on a switch and on a segment.
The administrative VLAN cannot be the RSPAN VLAN.
Examples
This example shows how to configure VLAN 100 as the REP administrative VLAN:
Switch (config)# rep admin vlan 100
You can verify your settings by entering the show interface rep detail privileged EXEC command.
Related Commands
Command
show interfaces rep
detail
Cisco ME 3400 Ethernet Access Switch Command Reference
2-310
rep admin vlan vlan-id
no rep admin vlan
The VLAN ID range is from 1 to 4094. The default is VLAN 1; the range to
configure is 2 to 4094.
Modification
This command was introduced.
Description
Displays detailed REP configuration and status for all interfaces or the
specified interface, including the administrative VLAN.
Chapter 2
Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-07
Hide quick links:
Advertisement
Table of Contents
