Advertisement
Quick Links
Advertisement
Related Manuals for AEG LFR6184N2B
Summary of Contents for AEG LFR6184N2B
- Page 1 LFR6184N2B User Manual Washing Machine USER MANUAL...
- Page 2 18. ENVIRONMENTAL CONCERNS..............39 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
- Page 3 ENGLISH SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
- Page 4 1.2 General Safety This appliance is for washing domestic-type, machine- • washable laundry only. This appliance is designed for single household • domestic use in an indoor environment. This appliance may be used in, offices, hotel guest • rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
- Page 5 ENGLISH approved by AEG (see more details in chapter "Accessories - Stacking kit"). 2. SAFETY INSTRUCTIONS 2.1 Installation 2.2 Electrical connection The installation must comply WARNING! with relevant national Risk of fire and electric regulations. shock. • Remove all the packaging and the •...
- Page 6 • Do not use an extension hose if the has been discontinued: motor and inlet hose is too short. Contact the motor brushes, transmission between Authorised Service Centre for the motor and drum, pumps, shock replacement of the inlet hose.
- Page 7 ENGLISH 3. PRODUCT DESCRIPTION 3.1 Special features programme duration in 30 seconds. The washing programme is tailored to Your new washing machine meets all the laundry load and the type of fabric modern requirements for an effective without consuming more time, energy treatment of laundry with low water, and water than necessary.
- Page 8 4. TECHNICAL DATA Dimension Width/ Height/ Total depth 59,6 cm /84,7 cm /60,2 cm Electrical connection Voltage 230 V Overall power 2000 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against mois‐...
- Page 9 ENGLISH WARNING! WARNING! It is possible to see Do not put cardboard, wood water flowing from the or equivalent materials drain hose. This is below the appliance feet to because the washing adjust the level. machine has been tested at the factory. 4.
- Page 10 2. Position it toward left or right The red sector in the window «A» shows depending on the position of the this fault. water tap. 45º 45º 20º 20º If this occurs, close the water tap and contact the authorized service centre to replace the hose.
- Page 11 ENGLISH 5. Without the plastic hose guide, to a sink spigot - Put the drain hose in the spigot and tighten it with a clamp. Refer to the illustration. Make sure that the drain hose end is not immersed in the water.
- Page 12 If you install the appliance on a plinth WARNING! that is not an accessory supplied by Do not put the tumble dryer AEG, secure the appliance with the fixing under the washing machine. plates. This spare part is available in web Verify the compatible shop or from authorised dealer.
- Page 13 ENGLISH 7. CONTROL PANEL 7.1 Control panel description 11 10 Programme dial Fácil Plancha/Engomar touch button Display Extra Aclar./Enxag. touch button Extra Rápido touch button Centrif. reduction touch button Inicio Diferido touch button Temp. °C touch button Opc. skipping touch button •...
- Page 14 Washing phase indicator. It flashes during prewash and wash phase. Rinsing phase indicator. It flashes during rinse phase. Spinning and draining phase indicator. It flashes during spin and drain phase. The digital indicator can show: • Programme duration (e. g.
- Page 15 ENGLISH the energy consumption in a few cases, The display shows the indicator you may need to activate the appliance The door stays locked and the drum again. turns regularly to reduce creasing. You must drain the water to unlock For more details, refer to Stand-by the door.
- Page 16 This option is not This option increases the available with a programme duration. temperature lower than 40 °C. The related indicator comes on. • Pre-Lav. 8.8 Fácil Plancha/Engomar Use this option to add a pre-wash phase at 30 °C before the washing The appliance carefully washes and phase.
- Page 17 ENGLISH 9. PROGRAMMES 9.1 Programme Chart Washing programmes Programme Programme description Washing programmes Eco 40-60 Low energy cycle for cottons. Decreases temperature and ex‐ tends time to reach good washing results. White and coloured cotton fabrics. Ideal for normal and heavy Algod.
- Page 18 Programme Programme description Maintenance cycle with hot water to clean and freshen the drum Limp. Máquina and to remove residue that may cause odour. Before running this cycle, remove all items from the drum. In the washing phase compartment of the detergent dispenser, put the flap of the com‐...
- Page 19 ENGLISH Programme Default tempera‐ Reference spin Maximum load ture speed Temperature Spin speed range range 40 °C 800 rpm 3 kg Edredón/Edredão 60 °C - Cold 800 rpm - 400 rpm Outdoor 30 °C 1200 rpm 2,5 kg 40 °C - Cold 1200 rpm - 400 rpm 1 kg 1200 rpm...
- Page 20 Options ■ ■ ■ ■ ■ ■ ■ ■ Centrif./Drenar Extra Aclar./Enxag. ■ ■ ■ ■ ■ Fácil Plancha/Engo‐ ■ ■ ■ ■ ■ Extra Rápido ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Inicio Diferido 1) This option is not available with temperature lower than 40 °C.
- Page 21 ENGLISH 9.2 Woolmark Wool Care - Blue The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool garments labelled as «hand wash» provided that the products are washed according to the instructions on the garment label and those issued by the manu‐...
- Page 22 3. Press and hold the Manchas/Pre- If the procedure does not Lav. and Fácil Plancha/Engomar work (due to timeout, wrong buttons for some seconds (within 10 programme dial position or seconds after the switching on. After wrong keys combination),...
- Page 23 ENGLISH 12.3 Filling the detergent and additives 2. Press the lever down to remove the dispenser. 3. To use powder detergent, turn the flap up. Compartment for prewash phase, soak programme or stain remover. Compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch).
- Page 24 The ProSense estimation starts at the end of the countdown. Cancelling the delay start after the countdown has started To cancel the delay start: 1. Touch the Inicio/Pausa button to pause the appliance. The related indicator flashes. 2. Touch the Inicio Diferido button Make sure that the flap does not cause a blockage when you close the drawer.
- Page 25 ENGLISH 12.9 Programme phase ProSense System starts the laundry load detection: indicators 1. The appliance detects the load in the When the programme starts the indicator first 30 seconds, the indicator of the running phase flashes and the flashes, the drum rotates shortly. other phase indicators are steady on.
- Page 26 12.12 Opening the door - 1. Press the On/Off button to deactivate the appliance. Adding garments After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance. While a programme or the delay start operates, the appliance door is locked.
- Page 27 ENGLISH 4. Press the On/Off button a few • After 5 minutes from the end of the seconds to deactivate the appliance. washing programme Press the On/Off button to activate In any case, the appliance the appliance again. empties the water out The display shows the end of the last automatically after set programme.
- Page 28 13.2 Stubborn stains • unsatisfactory washing results, • the wash load to turn grey, For some stains, water and detergent is • greasy clothes, not sufficient. • mould in the appliance. We recommend that you pre-treat these Excessive detergent may cause: stains before you put the items in the •...
- Page 29 ENGLISH 14. CARE AND CLEANING the drain pump" and "Cleaning the inlet WARNING! hose and the valve filter" paragraphs. If Refer to Safety chapters. necessary, please contact the Authorised Service Centre. 14.1 Periodic cleaning 14.3 External cleaning schedule Clean the appliance with mild soap and Periodic cleaning helps to extend the warm water only.
- Page 30 3. Add a small quantity of powder rinse out any left residues. detergent into the empty drum, in order to rinse out any left residues. 14.6 Door seal Occasionally, at the end of a...
- Page 31 ENGLISH Clean the drain pump if: • The appliance does not drain the water. • The drum does not turn. • The appliance makes an unusual noise because of the blockage of the drain pump. • The display shows the alarm code WARNING! •...
- Page 32 180˚ 5. When the bowl is full of water, turn 11. Put the filter back into the special the filter back and empty the guides by turning it clockwise. Make container. sure that you tighten the filter 6. Repeat the steps 4 and 5 until the correctly to prevent leakages.
- Page 33 ENGLISH 45° 20° 2. Remove the inlet hose from the 14.11 Emergency drain appliance by loosening the ring nut. If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain pump' paragraph. If necessary, clean the pump. 14.12 Frost precautions If the appliance is installed in an area where the temperature can reach the...
- Page 34 15.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check. With some problems, the display shows an alarm code and the...
- Page 35 ENGLISH If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. In case of different problem with the washing machine check the table below for possible solutions. Problem Possible solution •...
- Page 36 Problem Possible solution • Increase the detergent quantity or use a different detergent. • Use special products to remove the stubborn stains before The washing results you wash the laundry. are not satisfactory. • Make sure that you set the correct temperature.
- Page 37 ENGLISH Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. Values and programme duration may differ depending on different conditions (e.g. room temperature, water temperature and pressure, load size and type of laundry, supply voltage) and also if you change the default setting of a programme.
- Page 38 Programme Litres hh:mm °C Delicados 0.400 50.0 1:15 35.00 30.0 1200 30°C Lana/Lãs 0.300 60.0 1:05 30.00 30.0 1200 30°C 1) Reference indicator of the spin speed. 2) Suitable for washing heavily soiled textiles. 3) Suitable for washing lightly soiled cottons, synthetic and mixed fabrics.
- Page 39 ENGLISH Clean the filter regularly and, especially, if the alarm code appears on the display. 17.3 Programmes Pro‐ Load Product description grammes Eco 40-60 8 kg White and coloured cottons. Normally soiled garments. 8 kg White cotton and coloured cotton. Algod.
- Page 40 www.aeg.com/shop...