Advertisement
Quick Links
Z3/Z3C Series Hardware Installation Guide
About this Guide
This guide provides instruction on how to install and configure your Z3/Z3C series device. This guide also provides
mounting instructions and limited troubleshooting procedures. For more Z-series device installation guides, refer to the
Z-series
installation guides section
Product Overview
The Cisco Meraki Z-Series teleworker gateway is an enterprise class firewall, VPN gateway and router. Each model
offers wireless for connectivity, five gigabit ethernet ports, including a built-in PoE-enabled port for VoIP phones and
other powered devices. Each model is designed to securely extend the power of Meraki cloud managed networking to
almost any location. With a built-in LTE modem, the Z3C simplifies any deployment that requires a backup cellular
uplink, or is positioned in a remote location.
Features
• Managed via Cisco Meraki Dashboard
• Automatic Firmware upgrades
• Automatic WAN Failover to Cellular Uplink
• L3/L7 Stateful Firewall
• 1:1 and 1:Many NAT
• Configurable VLANs / DHCP support
on our documentation website.
1
Advertisement
Related Manuals for Cisco Meraki Z3 Series
Summary of Contents for Cisco Meraki Z3 Series
- Page 1 Product Overview The Cisco Meraki Z-Series teleworker gateway is an enterprise class firewall, VPN gateway and router. Each model offers wireless for connectivity, five gigabit ethernet ports, including a built-in PoE-enabled port for VoIP phones and other powered devices.
- Page 2 • Static Routing • Client VPN endpoint • Meraki AutoVPN and L2TP/IPSec VPN endpoint • Custom Traffic Shaping • Historical Client Usage statistics • Netflow support • Syslog integration • Remote Packet Capture tools Context and Comparisons Max Stateful Firewall Throughput in NAT 200 Mbps 200 Mbps mode...
- Page 3 LAN Interfaces - Dedicated 4x Dedicated GbE RJ45 4x Dedicated GbE RJ45 802.11a/b/g/n/ac Wave 2 (2.4 or 5Ghz) 802.11a/b/g/n/ac Wave 2 (2.4 or 5Ghz) Wireless Radio Information 2x2 MU-MIMO 2x2 MU-MIMO 2 x 2 MU-MIMO with two spatial 2 x 2 MU-MIMO with two spatial Antennas streams streams...
- Page 4 FDD-LTE 2, 4, 5, 13, 17 1, 3, 7, 8, 20 TD-LTE GSM Bands 850, 900, 1800, 1900 900, 1800 Certifications PTCRB (US) RCM (ANZ, APAC), GCF (EU) Tested Orange, Telia, Telecom Italia, Telefonica, Post, BT, STC, Telenor, AT&T, Bell Canada Carriers SingTel Carrier compatibility is generally based on having compatible bands on the modem.
- Page 5 In addition to the Z3/Z3C device, the following are provided: Power Adapter (No Power Cable) Power Adapter (No Power Cable) 2x CAT5 Ethernet Cables 2x CAT5 Ethernet Cables Wall Screws and Anchors Wall Screws and Anchors SIM ejector tool Front Panel Status Indicator The Z3C uses a single LED to inform the user of the device's status.
- Page 6 Power is applied but the appliance is not connected to Solid orange the Meraki Dashboard The appliance is attempting to connect to Meraki Rainbow Colors Dashboard Flashing White Firmware upgrade in progress Fully operational/connected, uplink actively using wired Solid White Fully operational/connected, uplink actively using Solid Purple (Z3C only) cellular failover...
- Page 7 printers, access points, or Ethernet switches. A steady green LED indicates bidirectional connectivity, and flashing green indicates traffic. [Far right Ethernet port] One of the LAN port provides PoE+ for connectivity to computers, printers, access PoE+ Port points, or Ethernet switches, up to 15W of PoE power. A steady green LED indicates bidirectional connectivity, and flashing green indicates traffic.
- Page 8 These 4 ports provide connectivity to computers, printers, access points, or Ethernet switches. LAN ports A steady green LED indicates bidirectional connectivity, and flashing green indicates traffic. One of the LAN port provides PoE+ for connectivity to computers, printers, access points, or Ethernet switches, PoE+ Port up to 15W of PoE power.
- Page 9 Please note that the serial number is located on the product label on the bottom panel of the Z3C Mounting Hardware The supplied wall screws and anchors allow you to mount the gateway on a drywall surface, either vertically or horizontally.
- Page 10 about creating, configuring and managing Meraki networks, refer to our Managing Dashboard Networks document. Additional resources can also be found via: documentation.meraki.com. 1. Login to http://dashboard.meraki.com. If this is your first time, create a new account. 2. Find the network to which you plan to add your Z3/Z3C or create a new network. 3.
- Page 11 Connecting to WAN All Meraki Z3/Z3C devices must have an IP address. This section describes how to configure your local area network before you deploy it. A local management web service, running on the appliance, is accessed through a browser running on a client PC.
- Page 12 2. Open the SIM tray using the SIM card removal tool included in the box 3. Insert a nano SIM card (4FF size) and close the SIM tray 4. Connect the uplink for the Z3C device via a wired connection to connect to the Meraki cloud 5.
- Page 13 If you are still experiencing hardware issues, please contact Cisco Meraki support by logging in to dashboard and using the Help option near the top of the page, then opening and email case or calling using the contact information on that page.
- Page 14 • The equipment is subject to installation and maintenance by specialists with the appropriate qualifications, sufficient specialized knowledge, and skills. • Rules and conditions for the sale of equipment are determined by the terms of contracts concluded by Cisco or...
- Page 15 Cisco partners with equipment buyers. • Disposal of a technical device at the end of its service life should be carried out in accordance with the requirements of all state regulations and laws. • Do not throw in the device with household waste. The technical equipment is subject to storage and disposal in accordance with the organization's disposal procedure.