Table of Contents
Advertisement
START/STOP
"START/STOP" button
Foot controller
1
2
22
1 Place the fabric under the presser foot, lower the presser
foot, and then press the "START/STOP" button. This
machine starts sewing.
*
Hold down the "START/STOP" button to sew at a slow
speed.
2. Press the "START/STOP" button to stop this machine.
Note
Do not allow fabric pieces and dust to collect in the foot
controller. Doing so could cause a fire or an electric shock.
1. With this machine turned off, insert the foot controller plug
into its jack on this machine.
1 Foot controller
2 Foot controller jack
2. Turn on this machine, then slowly depress the foot controller
to start sewing.
*
The speed set using the speed range control lever is the
foot controller's maximum sewing speed.
3. Release the foot controller to stop this machine.
*
When the foot controller is being used, the "START/STOP"
button has no effect on the sewing.
Note (For U.S.A. only)
Foot controller: Model J2
This foot controller can be used for this machine model PC-
8500.
- Quick Links:
- Principal Parts
Hide quick links:
Advertisement
Table of Contents
