Table of Contents
Advertisement
Cutting the thread
When you have finished sewing, cut the threads.
1
When you wish to finish the stitching and the
sewing machine is stopped, press
(needle position button) once to raise the
needle.
1
1 Needle position button
The needle is raised.
2
Raise the presser foot lever.
1 Presser foot lever
Pull the fabric to the left side of the machine,
3
and then pass the threads through the thread
cutter to cut them.
1
1 Thread cutter
1
■ Using the thread cutter button
(Only for models equipped with the thread
cutter button)
1
When you wish to finish the stitching, press
(thread cutter button) once.
1
1 Thread cutter button
The threads are cut and the needle is raised.
Raise the presser foot lever.
2
1 Presser foot lever
CAUTION
●
Do not press the thread cutter button
after the threads have already been cut,
otherwise the needle may break, the
threads may become tangled or damage
to the machine may occur.
Note
● Do not press the thread cutter button if there
is no fabric under the presser foot or while
the machine is sewing, otherwise damage to
the machine may occur.
● When cutting thread thicker than #30,
nylon thread or other special thread, use the
thread cutter on the side of the machine.
1
Sewing
55
- Quick Links:
- Winding/Installing the Bobbin
Hide quick links:
Advertisement
Table of Contents
