Table of Contents
Advertisement
3
Turn the balance wheel toward you until the
tip of the shuttle hook aligns with the edge of
the race shelf.
1
2
1 Shuttle race
2 Shuttle
3 Edge of the shuttle race
4 Tip of the shuttle hook
• Be sure to turn the balance wheel toward
you. Turning the balance wheel away from
you may damage the machine.
4
Remove the shuttle.
Grasp the shuttle, and then pull it out.
1 Shuttle
5
Use the cleaning brush or a vacuum cleaner to
remove any lint and dust from the race and its
surrounding area.
1
2
1 Cleaning brush
2 Shuttle race
• Do not apply oil to the shuttle.
3
4
1
6
Check that the edge of the race shelf is
positioned as in step
shuttle so that the projection on the shuttle
aligns with the spring.
2
1
1 Projection
2 Spring
Insert the tabs on the needle plate cover into
7
the needle plate, and then slide the cover back
on.
CAUTION
●
Never use a shuttle that is scratched,
otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new
shuttle (part code: XC3153-051), contact
your nearest authorized service center.
●
Be sure that the shuttle is correctly
installed, otherwise the needle may
break.
3
, and then insert the
1
2
Maintenance
125
- Quick Links:
- Winding/Installing the Bobbin
Hide quick links:
Advertisement
Table of Contents
