Table of Contents
Advertisement
The acoustic signals, they continue
operate when the appliance has a
malfunction.
10.2 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option, touch
the Taches/Prélavage and the Rinçage
Plus buttons simultaneously until the
indicator
comes on/goes off on the
display.
You can activate this option:
• After you touch the Départ/Pause button:
all the buttons and the programme dial are
deactivated (except Marche/Arrêt button ).
• Before you touch the Départ/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
10.3 Douceur Plus
Set the Douceur Plus option to optimise the
fabric softener distribution and improve the
fabric softness.
It is suggested when you use the fabric
softener.
This option increases slightly the
programme duration.
To activate/deactivate this option touch the
Température button and the Essorage button
simultaneously until the
on/goes off above the
10.4 Permanent Extra Rinse
With this option you can permanently have an
extra rinse when you set a programme where
it is selectable.
• To activate/deactivate this option touch
the Option button and the Rinçage Plus
button simultaneously the relevant
indicator comes on/goes off.
This option adds two rinses and the
display shows
20
ENGLISH
indicator comes
indicator.
.
10.5 Operating Hours Counter
It is possible to visualise the total operating
time of the appliance in hours, starting from
the first switching on. This value will count
operating time of the cycles (does not include
pauses, delayed start time). To visualise this
value, proceed as follows:
1. Switch the appliance on by pressing
Marche/Arrêt button.
2. Turn the programme knob to the Eco
40-60 programme (1st position
clockwise).
3. Press and hold the Anti-allergie and
Rinçage Plus buttons for some seconds
(within 10 seconds after the switching on.
After these 10 seconds, the key
combination activates and deactivates the
acoustic signals).
4. After 3 seconds the total hours operated
by the appliance are shown in the display:
e.g. 1276 hours, the display shows the
text Hr for 2 seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens and
units).
If the procedure does not work (due to
timeout, wrong programme dial position
or wrong keys combination), switch the
appliance off and repeat sequence from
the beginning.
10.6 Factory Reset
This function allows to restore the factory
default options. To activate this option follow
steps below:
1. Switch the appliance on by pressing
Marche/Arrêt button.
2. Turn the programme knob to the
Synthétiques programme (3rd position
clockwise).
3. Press and hold the Anti-allergie and
Rinçage Plus buttons for some seconds
(within 10 seconds after the switching on.
After these 10 seconds, the key
combination activates and deactivates the
acoustic signals).
4. The display will show
seconds.
for about 5
Advertisement
Table of Contents
