Table of Contents
Advertisement
Steps
1. Align the hard-drive with the mounting points on the caddy and place the hard-drive onto it.
2. Pull the tabs on the right side of the caddy until the hard-drive clicks into place.
3. Place the tabs on the right side of the hard-drive caddy onto the holders on the chassis and push the left side of the caddy
down until it clicks into place.
NOTE:
Use the arrows seen on the caddy as guides to identify the tabs on the tray.
4. Connect the hard-drive data and power cables to the connectors on the hard drive.
Next steps
1. Install the
front
bezel.
2. Install the
side
cover.
3. Follow the procedure in
Disk-drive cage
Removing the hard-drive and optical-drive cage
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
2.5-inch
after working inside your
before working inside your
hard-drive.
computer.
computer.
Removing and installing components
23
Advertisement
Table of Contents
