Advertisement
MOUNT
AIR CLEANER
Fit the air cleaner into the prepared duct opening
so that the flange on the air cleaner frame fits tightly
against the finished wall surface. Tack frame to wall
surface. Use sheetmetal screws to fasten the air cleaner
to the duct and
supporting
frame.
Overly tightened
mounting
screws may distort the frame and make it
difficult
to secure
the grille with the door latches.
SECURE AIR CLEANER
TO DUCT OPENING
WITH SCREWS
(AT ARROWS)
FIG. 10—FASTEN
AIR
CLEANER
TO DUCT
WITH
SHEETMETAL SCREWS.
WIRING
CAUTION
l. All wiring must comply with applicable codes
and ordinances.
2. Disconnect
power
source
to prevent electric
shock and damage to equipment. Use this device
only
with
a
120V,
60
Hz
power
source.
. When
making external circuit connections
to
the line voltage leadwires of this device, use
only
Underwriters
Laboratories
Inc.
listed
connectors.
Install the proper disconnect means as required by
local codes.
The only wiring required to the F52 is a constant
source of power. No interconnection to the fan system
is required for proper operation. The sail switch on the
air cleaner
automatically
energizes
the high voltage
power supply when the system fan is running.
Page
WIRING
COMPARTMENT
F52
ELECTRONIC
AIR CLEANER
A
120V, 60 HZ; 220, 240V 50 HZ POWER SUPPLY. PROVIDE
DISCONNECT
MEANS
AND OVERLOAD
PROTECTION
AS REQUIRED.
4456А
FIG. 11-МІНІМС
THE
F52 CONSISTS
OF SIMPLY
HOOKING
IT
TO
A
POWER
SOURCE.
FINAL ASSEMBLY
ATTACH CELL HANDLES
Plastic handles, found in the literature package, must
be attached to the electronic cells. Depending on where
the unit is located, one side of the cell or the other may
prove to be a more convenient location for the cell
handle.
1. Install the sliding end of the handle in the rec-
tangular slot on the end of the cell. Hold the handle
sideways, insert it into the slot, and rotate it 90 degrees
to line up the other tab with the square hole.
2. Insert
the other tab into the square
hole and
lock in place by bending back the wedge
part and
inserting it into the tab.
ROTATE
90 DEGREES
g^
ves
FOLD TAB
TO LOCK HANDLE
IN PLACE
РА
Advertisement
