Page 1
DAILY REFERENCE GUIDE THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. You can download the Safety Instructions and the In order to receive a more complete assistance, please Use and Care Guide, by visiting our website docs.whirlpool.eu and following register your appliance on: www.whirlpool.eu/register...
Page 2
FIRST TIME USE SALT, RINSE AID AND DETERGENT ADVICE REGARDING THE FIRST TIME USE FILLING THE RINSE AID DISPENSER After installation, remove the stoppers from the racks and the reta- Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be filled when the RINSE AID REFILL indicator light in the control ining elastic elements from the upper rack.
Page 3
ECO program data is measured under laboratory conditions according to European Standard EN 50242. Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com Pre-treatment of the dishes is not needed before any of the programs.
Page 4
OPTIONS AND FUNCTIONS OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled. DELAY TABLET The start time of the program may be delayed for a period...
Page 5
DAILY USE 1. CHECK WATER CONNECTION The machine will switch off automatically during certain Check that the dishwasher is connected to the water extended periods of inactivity, in order to minimise electri- supply and that the tap is open. city consumption. If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the di- 2.
Page 6
LOADING THE RACKS UPPER RACK LOWER RACK For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids Load delicate and light dishes: glasses, cups, saucers, low salad bowls. should ideally be placed at the sides to avoid interferences with the spray arm.
Page 7
CARE AND MAINTENANCE CLEANING THE SPRAY ARMS CLEANING THE FILTER ASSEMBLY Regularly clean the filter assembly so that the filters do not clog and On occasions, food residue may become encrusted onto the spray that the waste water flows away correctly. The filter assembly consists arms and block the holes used to spray the water.
Page 8
• After-Sales Service; phone number see in warranty The phone number is listed booklet. in the warranty booklet or on the • download from website: docs.whirlpool.eu website: www.whirlpool.eu • use QR code IEC 436...