Toro Multi Pro 1750 Software Manual
Turf sprayer
Hide thumbs
Also See for Multi Pro 1750:
- Service manual (353 pages) ,
- Operator's manual (76 pages) ,
- Installation instructions manual (65 pages)
Advertisement
Quick Links
The InfoCenter display shows information about your machine such as the operating status,
various diagnostics and other information about the machine. There are multiple screens on
the display. You can switch between the screens, at any time, by pressing the back button
and then using the up and down directional buttons.
Indicator light
Display
brightness
sensor
Note:
The purpose of each button may change depending on what is required at the time.
Each button is labeled with an icon displaying its current function.
© 2024—The Toro
®
Company
8111 Lyndale Ave So
Bloomington, MN 55044
Multi Pro® 1750 Turf Sprayer
Model No. 41188—417400000 and Up
Navigation
button—up
Back button
Register at
www.Toro.com
G471371s
Navigation
button—
decrease/left
Navigation
button—down
Original Instructions (EN)
Printed in the USA
All rights reserved
3465-405A
Software Guide
Navigation
button—
increase/right
Enter button
*3465-405* A
Advertisement
Related Manuals for Toro Multi Pro 1750
Summary of Contents for Toro Multi Pro 1750
- Page 1 Note: The purpose of each button may change depending on what is required at the time. Each button is labeled with an icon displaying its current function. *3465-405* A © 2024—The Toro ® Company Register at Original Instructions (EN) 8111 Lyndale Ave So www.Toro.com...
- Page 2 InfoCenter Display Icons Menu Tank is empty (less than 10% volume) Scroll up/down Tank volume is low (10% to 29%) Scroll left/right Tank volume is half full (30% to 69%) Previous screen Tank volume is full (70% to 100%) Decrease value Increase the tank volume by 1 gallon Increase value...
- Page 3 Overview of the Menus To access the InfoCenter display menu system, press the back button while at the main screen. This brings you to the main menu. Refer to the following tables for a synopsis of the options available from the menus. Protected under Protected Menus—accessible only by entering PIN Main Menu Menu Item...
- Page 4 Description Faults The Faults menu contains a list of the recent machine faults. Refer to the Service Manual or contact your authorized Toro distributor for more information on the Faults menu and the information contained there. Hours Lists the total number of hours that the machine,...
- Page 5 Note: The factory default PIN code for you machine is either 0000 or 1234. If you changed the PIN code and forgot the code, contact your authorized Toro distributor for assistance. 1. From the Main Menu, scroll down to Settings and press the select button.
- Page 6 Accessing Protected Menus (continued) 2. In Settings, scroll to Enter PIN and press the select button 3. To enter the PIN code, press the up/down navigation buttons until the correct first digit appears, then press the right navigation button to move on to the next digit. Repeat this step until the last digit is entered.
- Page 7 Setting the Boom Sizes 1. Select Machine Settings. 2. Select the boom you would like to update. 3. Use the directional buttons to change the boom size in increments of 1 inch (2.5 cm). Resetting the Default Settings Setting Default Value Test Speed Hill Assist enabled...
- Page 8 The Total and Sub Area Screens These screens display: • Area sprayed (acres, hectares, or 1000 ft • Volume sprayed (US gallon or liters) The area and volume information accumulates until you reset it. Use an individual sub area for each sprayer task at your site. You can use up to 20 sub areas.
- Page 9 Advisories Operator advisories automatically display on the InfoCenter screen when a machine function requires additional action. For example, if you attempt to start the engine while pressing the traction pedal, an advisory displays, indicating that the traction pedal must be in the N position.
- Page 10 Speed sensor calibration—Turn off the booms Calibration out of bounds, using default Service Fault Codes The list below identifies the fault codes that are generated by the Electronic Controller (TEC) to identify an electrical system malfunction that occurred during machine operation. If you see faults listed in the viewer, contact your Authorized Service Dealer.
- Page 11 Diagnostic Inputs and Outputs Diagnostics are used to troubleshoot machine operation issues and ensure that necessary components and circuit wiring are functioning correctly. Pump Parameters Inputs Outputs Pump Switch Main Pump Momentary Rinse Rinse Pump Timed Rinse Throttle Home Timer Boom Parameters Inputs Outputs...