Related Manuals for Motorola Avigilon NVR6-PRM-PLUS-FORM-H-200TB
Summary of Contents for Motorola Avigilon NVR6-PRM-PLUS-FORM-H-200TB
- Page 1 Avigilon NVR6 Premium Plus Form H User Guide NVR6-PRM-PLUS-FORM-H-200TB NVR6-PRM-PLUS-FORM-H-240TB NVR6-PRM-PLUS-FORM-H-280TB NVR6-PRM-PLUS-FORM-H-360TB NVR6-PRM-PLUS-FORM-H-400TB...
- Page 2 Copyright © 2024, Avigilon Corporation. All rights reserved. AVIGILON, the AVIGILON logo, AVIGILON CONTROL CENTER, and ACC are trademarks of Avigilon Corporation. Microsoft and Windows are trademarks of the Microsoft group of companies. Dell is a trademark of Dell Inc. Other names or logos mentioned herein may be the trademarks of their respective owners.
-
Page 3: Table Of Contents
Contents Introduction Before You Start Overview Front View Back View Package Contents Installation Connect Cables Install the Shelf-Mount Adjustable Rail Kit Install the Bezel Configure the Operating System Activate the ACC Software and Connect to Avigilon Cloud Services Activate ACC Software and Feature Licenses Connect to Avigilon Cloud Services (Optional) Reactivating a License Upgrading the NVR6 Premium Plus Form H to Unity Video... - Page 4 Power Status Indicators UID Status Indicator Health Status Indicators Network Status Indicators Health and Thermal Status Indicators for Hard Drives Hard Drive RAID Status Indicators Rear View Network Status Indicators UID Status Indicator Power Status Indicators For More Information Additional Documentation...
-
Page 5: Introduction
Introduction The Avigilon Network Video Recorder (NVR6 Premium Plus Form H) is preloaded with Avigilon Control Center (ACC) software and is configured for exceptional performance and reliability. The Network Video Recorder can be easily integrated into any existing Avigilon surveillance system or act as the base of a new site. Before You Start Avigilon recommends the use of an uninterruptible power supply (UPS) system to protect your video surveillance system hardware. -
Page 6: Overview
Overview Front View Figure 1: Front view of NVR6 Premium Plus Form H with front bezel installed Figure 2: Front view of NVR6 Premium Plus Form H with front bezel removed 1. Bezel Protects against unauthorized physical access to the hard drives. For more information, see Install the Bezel on page 2. -
Page 7: Back View
Back View Figure 3: Back view of NVR6 Premium Plus Form H 1. Four (4) 1 GbE Ethernet Base-T ports Accepts Ethernet connections to multiple networks and includes LED indicators of the connections. 2. UID LED indicator Identifies a recorder deployed in a rack with other equipment. 3. -
Page 8: Package Contents
Package Contents Ensure the package contains the following: Avigilon NVR6 Premium Plus Form H Recorder Self-Mount Adjustable Rail Kit Bezel with Kensington slot Kensington lock included in a separate kit Power cables 2 x C13 / C14 2 x Region specific NA: NEMA 5-15P / C13 UK: BS 1363 / C13 EU: SCHUKO / C13... -
Page 9: Installation
Installation NOTE Before you start, obtain the serial number and default user name, DNS name, and password for the iLO and OOBM account from the iLO label, which is displayed on the top panel of the front cage. IMPORTANT Avigilon recommends changing the default iLO password (eight characters) after initial login to protect your recorder from unauthorized remote access. -
Page 10: Install The Bezel
Install the Bezel The bezel can be installed on the front of the NVR6 Premium Plus Form H recorder to help protect the hard drives against unauthorized access. 1. Align and insert the right end of the bezel until it clicks into place. 2. -
Page 11: Configure The Operating System
Configure the Operating System Configure the preloaded Windows Server 2022 operating system. Activate the ACC Software and Connect to Avigilon Cloud Services After you have deployed your NVR6 Premium Plus Form H recorder, activate your ACC software and feature licenses and connect to Avigilon Cloud Services. Activate ACC Software and Feature Licenses You can activate, deactivate, and reactivate product or feature licenses. -
Page 12: Upgrading The Nvr6 Premium Plus Form H To Unity Video
1. In the New Task menu , click Site Setup. 2. Click the site name, then click 3. Click Reactivate Licenses…. If you have Internet access: a. Click Reactivate Licenses. b. Click OK to confirm your changes. If you do not have Internet access: a. -
Page 13: Troubleshooting
Troubleshooting Network Configuration By default, the NVR6 Premium Plus Form H acquires an IP address on the network through DHCP. If you need to set up the NVR6 Premium Plus Form H to use a static IP address or any specific network configuration, see the Windows Help and Support files for more information. -
Page 14: Operating System Recovery By External Usb
4. On the Avigilon Recovery window, select Recover. Allow up to half an hour for the recovery to complete. 5. After system reboot, complete the Windows setup process. For more information about setting up the Windows operating system, see Logging into Windows Server for the First Time on page 6. -
Page 15: Maintenance
Maintenance Updating Drivers, Software and Firmware As a best practice, Avigilon recommends that you install the latest firmware, drivers, and system software before using the server for the first time. Update your system with Intelligent Provisioning, which is accessible by pressing F10 during the server boot process. -
Page 16: Downloading The Active Health System Log
1. If not done, connect a monitor to the recorder. 2. Press the UID button on the front of the recorder to display it. 3. Press the UID button again to close the summary. Downloading the Active Health System Log NOTE Before you start, make sure the iLO Service Port and USB flash drives options are enabled in the iLO web interface. -
Page 17: Replacing Hard Drives
Replacing Hard Drives Guidelines When replacing hard drives, observe the following general guidelines: The system automatically sets all device numbers. If only one drive is used, install the drive in the drive bay with the lowest device number. For example: Figure 4: Front hard drive view of NVR6 Premium Plus Form H Figure 5: Center hard drive bay view of NVR6 Premium Plus Form H Figure 6: Rear hard drive view of NVR6 Premium Plus Form H... -
Page 18: Powering Down The Recorder
CAUTION Do not operate the system for long periods with the front drive cages extended. When the front drive cages are extended while the system is powered on, monitor the status of the front drive temp sensor (08-HD Max) in iLO. If the iLO temp sensor (08-HD Max) reading is reporting an N/A value, monitor how long the drive cages have been out of the chassis. -
Page 19: Powering Up The Recorder
WARNING To reduce the risk of personal injury, electric shock or damage to the equipment, disconnect the power cord to remove power from the server. Pressing the power and standby button does not shut off system power completely. Portions of the power supply and some internal circuitry remain active until AC power is removed. -
Page 20: Replacing Front Hard Drives
1. Remove the bezel. a. Align and insert the right end of the bezel until it clicks into place. b. Push the left end of the bezel into the front of the unit until it clicks into place. c. Adjust the Kensington cable and insert the T-bar into the security slot on the bezel. d. -
Page 21: Replacing Center Hard Drives
7. Pull the release lever to disengage the drive from the backplane, and then slide the drive out of the bay. 8. To replace the hard drive, reverse the above steps. Replacing Center Hard Drives To replace a hard drive stored in the middle of the recorder, complete the following steps: 1. - Page 22 5. Extend drive cage 1 to access drive cage 2: 6. Determine the status of the hard drive LED. Hard Drive RAID Status Indicators on page For more information, see 7. Wait until the Activity LED stops flashing. 8. To open the release lever, press the latch. Replacing Center Hard Drives...
-
Page 23: Replacing Rear Hard Drives
9. Pull the release lever to disengage the drive from the backplane, and then slide the drive out of the bay. 10. To replace the hard drive, reverse the above steps. Replacing Rear Hard Drives To replace a hard drive stored in the rear of the recorder, complete the following steps: 1. -
Page 24: Led Indicators
LED Indicators The following tables describe what the LEDs on the recorder indicate. For more information on the location of the Overview on page LED indicators, see Front View NOTE When the power status, UID status, system health and network status LED indicators are flashing simultaneously, a power fault has occurred. -
Page 25: Health Status Indicators
LED Indicator Description (iLO web interface) is initiated. 8 flashes per second: The manual reboot of the remote server management tool (iLO web interface) is in progress. Steady blue The Server Health Summary is enabled. Health Status Indicators indicator on the front of the recorder provides the following system health states: LED Indicator Description Flashing red... -
Page 26: Hard Drive Raid Status Indicators
LED Indicator Description WARNING Do any of the following: Review ACC Client Site Health. Replace the drive as soon as possible. Steady green All the hard drives in the front, center or rear cage are working. Hard Drive RAID Status Indicators Each hard drive has its own set of LED indicators to show its activity and status. -
Page 27: Rear View
LED Indicator Description Capacity expansion Logical drive extension Erasing Spare part activation Rear View Network Status Indicators The indicators on the rear of the recorder provides the following network connection states: OOBM port 1 Gbps Ethernet ports 10Gbps SFP+ Ethernet port 1. -
Page 28: Power Status Indicators
Power Status Indicators The power button indicator on the front of the recorder provides the following power and system state information: LED Indicator Description The power supply is not connected, power supply failure, the power supply is in standby mode, or the facility power is off. Steady green The power supply unit is working. -
Page 29: For More Information
For More Information For additional product documentation and software and firmware upgrades, visit support.avigilon.com. Technical Support Contact Avigilon Technical Support at support.avigilon.com/s/contactsupport. Additional Documentation Windows Upgrade and Recovery Guide for Avigilon For More Information...