Table of Contents
Advertisement
Product Overview
Figure 6: Rear Panel of a C9200 Switch
1
2
3
RFID Tag
The switch has a built-in, front-facing, passive RFID tag that uses UHF RFID technology and requires an
RFID reader with compatible software. It provides auto-identification capabilities for asset management and
tracking. The RFID tags are compatible with the Generation 2 GS1 EPC Global Standard and are ISO 18000-6C
compliant. They operate in the 860- to 960-MHz UHF band. For more information, see
Identification (RFID) on Cisco Catalyst 9000 Family Switches White
StackWise Ports
StackWise ports are used to connect switches in StackWise stacking configurations. The switch ships with a
0.5-meter StackWise cable that you can use to connect the StackWise ports. For more information on StackWise
cables, see
Caution
Use only approved cables, and connect only to similar Cisco equipment. Equipment might be damaged if
connected to nonapproved Cisco cables or equipment.
Power Supply Modules
The switch has a field replaceable main AC power supply module and a redundant hot-swappable field
replaceable AC power supply module. The switch is powered through one or two internal power supply
modules. In switches with PoE capability, the redundant power supply can also be used for extra PoE power.
RJ-45 console port
Modular fan modules on
C9200 switches
Power supply module
slots
Connecting to the StackWise Ports, on page
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
4
Blue Beacon LED
5
MGMT (RJ-45
10/100/1000 management
port)
6
StackWise-160 port
connector slots with stack
blanks installed
Paper.
29.
RFID Tag
Radio Frequency
9
Advertisement
Table of Contents
