Product Overview
2
3
4
5
RFID Tag
The chassis has a built-in,passive RFID tag that uses UHF RFID technology and requires an RFID reader
with compatible software. It provides auto-identification capabilities for asset management and tracking. The
RFID tags are compatible with the Generation 2 GS1 EPC Global Standard and are ISO 18000-6C compliant.
They operate in the 860- to 960-MHz UHF band. For more information, see
(RFID) on Cisco Catalyst 9000 Family Switches White
RJ-45 Console Port LED
Table 14: RJ-45 Console Port LED
Color
Off
Green
StackWise Ports
StackWise ports are used to connect switches in StackWise stacking configurations. The switch ships with a
0.5-meter StackWise cable for modular uplink switch models that you can use to connect the StackWise ports.
For more information on StackWise cables, see
Caution
Power Supply Modules
The switches are powered through one or two internal power supply modules. The switches ship with one
power supply module by default, and the second power supply can be purchased when the switch is ordered
or at a later time.
Following is the list of all the power supply modules supported on Cisco Catalyst 9300 Series Switches. For
information about the modules supported on each switch model, see
page
• PWR-C1-350WAC
• PWR-C1-715WAC
Ground connectors
BEACON LED
CONSOLE (RJ-45 console port)
MGMT (RJ-45 management port)
Use only approved cables, and connect only to similar Cisco equipment. Equipment might be damaged if
connected to nonapproved Cisco cables or equipment.
81.
7
StackPower+ connectors
8
Power supply modules
9
StackWise-1T port connectors
-
-
Paper.
RJ-45 Console Port Status
RJ-45 console is disabled. USB console is active.
RJ-45 console is enabled. USB console is disabled.
Connecting the StackWise Cables, on page
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
Radio Frequency Identification
60.
Power Supply Modules Overview, on
RFID Tag
25