Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
REFER TO INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE
AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1.
INTRODUCTION
P2 R D Prefliter reusable filter element for use in conjunction with cartridge filter systems.
Compatible with the Sealey 9000 half mask and 9001, 9002, 9003 range of filter cartridges and 9009
Filter Retainer.
Type Examination Ref.:
Notified Body:
2.
SAFETY
IMPORTANT: The use limitations of these respirators depend on the type of filter they are used with as well as the conditions of the
environment user work in, contaminant concentration, type of work, etc. For an effective and proper use of the filters, read carefully the
following instructions and keep this document for further consultation.
These filters DO NOT supply oxygen (O
8
Use in adequately ventilated areas. DO NOT use in case of oxygen deficiency.
9
DO NOT use in explosive atmospheres.
8
Filters should NOT be used in fire-fighting or to work with open flames or molten metal since the combustion of the activated carbon
8
contained in the filters can generate high levels of toxic substances.
The right filter must be chosen according to concentration and type of contaminant in each case.
9
DO NOT use as protection against carbon monoxide under any circumstances.
8
DO NOT modify or repair the filter or cover. In case of damage or loss of seal, replace the product with a new one.
8
Filters, combined filters and absorbers require no maintenance or repair.
8
Leave work if respiratory protection is damaged, if you have difficulty breathing and/or if you start to feel nauseous or dizzy.
9
DO NOT use respirators with filters or combined filters or absorbers in closed silos, wells, canals or other closed places without ventilation.
8
DO NOT use in an oxygen enriched atmosphere.
8
DO NOT use in an atmosphere with unknown air quality.
8
Use cleansers also as indicated in the respirator manual
9
DO NOT use if the storage took place under conditions other than those specified by the manufacturer. This may affect the shelf life.
8
DO NOT remove the adapter once installed during use.
8
Ensure the type of filter is the correct one for intended use, and that you have installed both filters of the same type.
9
Inspect the filters and respirator for any signs of damage before each use. If damaged or the item has expired it must be replaced.
9
Only use filters that have been stored correctly in their original packaging as per these instructions.
9
The use of filters must comply with current legislation, regulations about respiratory protection and regulations from various official bodies.
3.
ASSEMBLY
3.1.
BEFORE EACH USE
1. Read instruction for use carefully. 2. Make sure the type of filter is the correct one for intended use. 3. Make sure that you installed
both filters of the same type. 4. Make sure that the filter as well as the respirator do not present any signs of tearing, distortions, dents,
nor dirt Should this be the case, it must be disposed of. 5. Make sure filter is in its original packaging. 6. Filter must be inspected before
its use. In case of contamination, distortion and/or expiration it must be replaced.
3.2.
FITTING THE FILTERS
Match the plastic filter connection with the filter holder on the mask. Press and turn the filter all the way clockwise. Repeat with second filter.
4.
FILTER PROTECTION
MODEL
STANDARD/TYPE/CLASS
9006
EN 14387:2004 + A1:2008 / P2 R D
© Jack Sealey Limited
P2 R D PARTICULATE PREFILTER -
PACK OF 4
9006
MODEL NO:
0082/1694/079/03/22/0186
Apave Sudeurope sas (notified body number 0082)
).
2
PROTECTION
Particles (dusts and aerosols)
Original Language Version
9006
Issue 1
01/05/24
Advertisement
Related Manuals for Sealey WORKSAFE 9006
Summary of Contents for Sealey WORKSAFE 9006
- Page 1 PACK OF 4 9006 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. REFER TO INSTRUCTIONS IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY.
- Page 2 Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk...