Page 2
SCHNEIDER ELECTRONICS GMBH-GERMANY 1. CAUTION CA UTION: Use of controls, adjustments or procedures other than those specified herein may result in hazardous radiation exposure. CA UT ION : T O RE DUCE TH E RIS K OF CA U T ION ELECTR ICA L SHOCK, DO NOT RE MOVE COVER (OR BACK).
Page 3
SCHNEIDER ELECTRONICS GMBH-GERMANY IMPORTANT SAFETY INSTRUCTIONS CAUTION: Read all of these instructions. Sa ve these instructions for later use . Follo w all W arnings and Instructions marked on the audio equipment. 1. Read Instructions-All the safety and operating instructionsshouldbe read before the productis operated. 2.
Page 4
SCHNEIDER ELECTRONICS GMBH-GERMANY PROTECTION AND LOCATION OF YOUR SET Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall outlet and refer servicing to qualified service personnel.
Page 5
SCHNEIDER ELECTRONICS GMBH-GERMANY OPERATION OF YOUR SET 18. This television set should be operated only from the type of power source indicated on the marking label.If you are not sure of the type of power supply at your home, consult your television dealer or local power company. For television sets designed to operate from battery power, refer to the operating instructions.
Page 6
PRODUCT SPECIFICATION RELEASE Model: Panasonic TH-32D310M/V59S.PB781 Version:1.0 Issued On: 2015-12-03 Basic Information Media Format LCD TV Product Type Music MP3/WMA V59S.PB781 Chassis Picture JPEG、BMP、PNG H.264、MPEG4、 OSD Language English/French/Arabian/Portuguese/Persian MPEG2、MKV w/o Video Divx PAL BG/DK/I ; SECAM TV System File PAL、NTSC、SECAM...
Page 7
Surround Sound Sound Scene DD (Dolby Digital ) Mechanical dimension ID Picture...
Page 8
Optional Accessories Operation Manual English(Default) Wall Mount WMB233 Remote Control and batteries Panasonic ATV RCU,with two batteries) Integrated Packaging Base Stand 1pc 1.5m VDE power cord AC power cord 1pc 1.5m BS power cord Adapt Cable Wire For AV Or YPBPR...
Page 9
Alignment Procedur VERSION V1.0 PREPARED BY : Tanner DATE : 2016-2-2 APPROVED BY : DATE :...
Page 18
MSD V59 Upgrade Instruction V2.0 upgrade bin file ................................ 2 一、 USB upgrade procedures for TV set ........................ 3 二、USB upgrade procedures for AD Board ........................ 3 三、ISP upgrade method ............................. 4 ...
MSD V59 Upgrade Instruction V1.0 upgrade bin file Different Board may need software with different name, for example, VST59.A1A which use the chipset TSUMV59XU only recognize software with the name of "bin_V59.bin" The names for other board is as below: T.VST59.A1A T.VST59.91A T.VST59S.21A A/D Board T.VST59.A5A T.VST59S.81A T.VST29.A2B TSUMV59XU TSUMV59XUS Chip TSUMV59XE TSUMV59XES bin_v59.bin bin_v59S.bin Name .bin is the extend file name. Note:...
一、 USB upgrade procedures for TV set 1. Copy the software to the root directory of your USB memory stick. Plug the USB memory stick to the USB port. 2. Select "Software Update(USB)" on the OSD and follow the instructions. TV will switch-off automatically when upgrading finishes. 3.
三、ISP upgrade method 1、Hardware tools 1.1 USB Cable 1.2 Serial port board B.CNSISP7A [you Debug_board_driver need to install the driver: (XP) 1.3 4PIN converted cable ...
Page 22
2、Connect Connection as shown below Please note that there are two plugs on the board "",you should connect the 4-pin cable to the correct plug on the board "" 3、Driver and Upgrading Applications USB_Board_Driver 和 ISP_Tool_4528 Install USB_Board_Driver,Please c B.CNSISP7A 3.1 To onnect ...
Page 24
When you see some dialog window as below, select "Continues" ...
Page 25
Successfully installed [Note: you must connect USB tool before installation] ...
Page 26
3.2 Check if the installation was successful Open 'Device Manager', if you find the device like Mstar USB Serial Port (Com10), you have installed the driver successfully. Note: If you can not find that,just unplug the USB cable and connect again. Please allow the 'Found New Hardware Wizard' to search for driver by itself. ...
Page 27
4、 Decompress ISP_Tool_4528.rar and you will get ISPISP_Tool.exe 4.1 Run ISPISP_Tool.exe, Click the button "config", set the parameter as below:ISP 0x92, IIC:OXB2 Click “connect” to enter ISP Mode. 4.2.1 Click “connect” to enter ISP Mode. If it connect successfully, it will shown “Device Type” as the picture below...
Page 28
If it fail to connect, it will show “Can’t find the Device Type” 4.2.2 Note: If it fail to connect, please check: 1、whether power is on. 2、whether you have installed the driver successfully and you can find the device in the device manager 3、whether the cable connection is correct. ...
Page 29
Switch to “Read” page, click “Read” then select the upgrade “bin” file. Switch to “Auto” page, set the parameter as below: click “Run” to start the upgrading. ...
Page 30
When upgrading it looks like: When it finishes, it looks like: You will find a 'Pass' in green ,if not re‐connect the power of the board, and upgrade again. ...
Page 31
Power Tree 0Ω 500mA USB_5V 1x USB2.0 5V_M 130mA 1V8_DDR 130mA WPM3407C TSUMV59XX 150mA 1V2_core 500mA Core 1.2A DC-DC 3V3_STB 200mA INNER POWER Max:2500mA 5V_STB 400mA 3A DC/DC 2180mA 3V3_STB 200mA TUNER 1000mA WPM3407C PANEL 1300mA OB6220 Block Diagrm DP&DM U SB LVD S Panel(D8bit)
Page 39
TP.VST59S.PB781 3MV59AX7 PCB_NAME PCB_NAME1 A15286 PCB_TIME MARK MARK MARK MARK MARK MARK V59XES NC/0ohm-0402-± 5%-1/16W NC/0ohm-0402-± 5%-1/16W V59XUS NC/18.8×13.8×5- -THD 0.1g, CAUTION S/N1 S/N2 COLD High Voltage Manufacture_Info...
Page 40
Trouble shooting diagram Terms: IR: Infrared Receiver RC: Remote Control IR logic: IR blink with RC action LVDS: Low Voltage Differential Signal, output from processor and input for panel O/C: Open Cell, panel with source board BL: Back Light, light source for panel module LB: LED (Light Emitting Diode) Bar, light source for BL module VBL: Voltage for Back Light (before Boost) VLED: Voltage for LED (after Boost)
Page 41
1.No power No power LED, RC or Key can not turn on TV. Power LED no light/no change.
Page 42
2.No Display / Black Panel Back light is OK, sound is OK, but no picture.
Page 43
3.No back light Power LED logic OK, sound OK, but no picture(Different from No Display).
Page 44
4.No sound One or all signal source without sound.
Page 45
5.Signal source no function One or several source no function.
Page 48
Optional reserve material list E3-32D160YU-NG0W/TH-32D310M/32D1600/3MV59AX7/CSFGTA/DM Child Description Unit M8-32D310M-LPPX1 Module 1 PC 67-734000-0G0 RAW SUPPORT 32D1400_VESA 32D1400 BLACK 0 1 PC 02-SH959S-C001000 IC MAIN SINGLE CHIP ANALOG TV SOLUTION W 1 PC 56-478810-CUNG RAW SUPPORT V59.PB781 32D1600 BLACK 0 0...