Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Page 4
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
CONTENTS 1 INSTRUCTIONS FOR SAFETY Adjusting the height of loaded upper basket ............25 AND ENVIRONMENT Height setting with empty basket ..26 General safety ..........4 Intended use ..........4 5 OPERATING THE PRODUCT 27 Children’s safety .......... 5 Keys ..............28 Disposing of packaging material ....
instructions for safety and environment This section contains safety electric shock! instructions that will help to Never touch the plug with • get protected from risk of wet hands! Never unplug by personal injury or property pulling on the cable, always damage.
instructions for safety and environment Children’s safety It must be used to do the • domestic type dishes only. Electrical products are • This appliance is intended • dangerous for the children. to be used in household and Keep children away from the similar applications such as: product when it is in use.
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured water supply connections. from recyclable materials in accordance with our National 3. Drain the remaining water in Environment Regulations.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be...
Installation Aquasafe+ Permitted water temperature: up to 25°C (depends on model) The dishwasher may not be connected to The Aquasafe+ system protects against open warm water devices or flow-through water leaks that may occur at the hose water heaters. inlet.Water contact with the valve box of Do not use old or used water inlet •...
Installation Electrical connection Connect the product to a grounded outlet protected by a fuse complying with the values in the “Technical specifications” table. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
Installation Initial use Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections “Important safety instructions” and “Installation”. To prepare the product to do the • dishes, perform first operation in the shortest programme with detergent while the machine is empty.
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Cleaning, rinsing and drying performance of efficient manner. your dishwasher will increase when water Wipe away any coarse food remnants on softening system is adjusted properly.
Page 16
Installation Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
Preparation If the hardness level of the supply water is We recommend using granular above 90 °dF or if you are using well water, or powder softening salts. Do then it is recommended to use water not use salts that are insoluble purification devices and special filters.
Preparation shortest programme to dissolve and Salt reservoir will fill with water wash away the scattered salt in the when you start the product. machine. Therefore, add the softening salt before starting the Since different salt brands machine. in the market have different particle sizes and since the Before initial use, fill the water water hardness may vary,...
Page 19
Preparation In order to have good washing and drying results, always follow the instructions on the detergent packaging. If you have further questions, we recommend to contact with the producer of the detergent. Do not put solvents into the detergent dispenser. There is risk of explosion! If dishes have been waiting Put the detergent into the detergent...
Preparation Combined tablet detergents Depending on the model, salt indicator and/or rinse aid Combined tablet detergents exhibit water indicator must be enabled again softening and / or rinse aid effect in if they were disabled before. addition to detergent effect. Some types of these detergents also contain special- Rinse aid purpose washing chemicals such as glass...
Page 21
Preparation Placing the dishes into the 3. Turn the rinse aid amount adjuster manually to a position between 1 and dishwasher 6 (4). If there are stains on tableware You can use your dishwasher in the items after washing, level must be optimum way with respect to energy increased and if there is a blue trace consumption and washing and drying...
Page 22
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket /43 EN Dishwasher / User’s Manual...
Preparation Cutlery basket Collapsible lower basket tines (depends on model) Cutlery basket is designed to wash your (depends on model) dishes such as knife, fork, spoon, etc. in a Foldable tines (A) located at the lower cleaner manner. basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc.
Preparation Bringing the tines to the horizontal position by holding them from the tips may cause them to bend. Therefore, it will be appropriate to bring the tines in the middle to horizontal or vertical position by holding them from their stems and pushing in the direction of arrow.
Preparation Collapsible upper basket Collapsable lower basket tines wires (2 pieces) (depends on model) (depends on model) Upper basket of the machine is equipped The two piece foldable wires located at the with tines with gradual folding system (A) lower basket of the machine are designed that you can lay down when you need a for an easier placement of large pieces larger space for large dishes.
Preparation Upper basket rack To lower the basket: Press the latch on the loaded basket (depends on model) adjustment mechanism (right and left) to lower the basket (B). Adjusting the height of the upper basket Repeat the same process to lower the (depends on model) other side of the basket.
Preparation Adjusting the height of loaded upper basket (depends on model) Basket adjustment mechanism on the upper basket of the machine is designed to allow you create wider areas in the upper or lover section of the machine based on your requirements by adjusting the height of the loaded basket in up or down directions without removing it from the machine.
Preparation Height setting with empty basket (depends on model) In this model, the height setting of the upper basket may be changed using the wheels which are mounted at two different heights. Release the latches on both the right and left tracks of the upper basket by pushing them outwards Pull out the basket out completely.
Operating the product Display 5. Function keys Half Load function 2. On/Off key 3. Start/Pause/Cancel key Fast+ Function 4. Time Delay key Super Rinse Function AquaActive Function 6. Programme Selection keys 7. Programme indicator 12. End of Programme indicator 8. Salt ( ) indicator 13.
Operating the product Keys 3. Press Programme Selection keys until the number of the programme you On / Off key selected appears on the Programme It is used to turn on or off the machine. indicator. Use P+ to switch to the next Press On / Off Key to switch ON.
Operating the product Auxiliary functions Fast+ Function It shortens the time of the washing cycle Washing programmes of your dishwasher selected and decreases water consumption are designed to obtain the best cleaning by enabling washing under higher pressure. effect, considering the type of the soil, soiling degree and properties of the dishes AquaActive Function to be washed.
Operating the product Auto Tablet Feature Interior Lighting Auto Tablet is a feature which detects (Depends on the model) the use of combined tablet detergents Some models have interior lighting to automatically. illuminate the interior when the door is opened. Drying performance of these Changing the interior lighting type of detergents is improved...
Page 34
Operating the product Delay function to wash your dishes during on the Display Information Line. Time appropriate hours. Delay indicator will turn off at the You can delay the start of the selected end of the cancellation process and programme until 24 hours. Time Delay delaying process is cancelled.
Operating the product Pay attention not to open the If you turn your machine off door of the machine when it is by using On/Off key at the running. Stop the machine by end of the programme, the pressing Start / Pause / Cancel Child Lock will be deactivated key if you have to open the automatically.
Operating the product regularly by the machine; when the water Adjusting the water hardness is restored E:02 icon will disappear after level is explained in Water a while and the washing programme Softening System section. resumes. Rinse Aid indicator ( ) Overflowing warning Please check the rinse aid indicator on the If the machine intakes too much water or...
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left Lower impeller to remove the upper impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 41
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 42
Troubleshooting • Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling process. Run the prewash programme to remove the salt that spilled inside the machine.
Page 43
Troubleshooting • Kitchen utensils that are already corroded are washed in dishwasher. >>> Rust on a corroded item can migrate to other stainless steel surfaces and cause corrosion on those surfaces as well. Such items should not be washed in dishwashers. Detergent remains in detergent dispenser.
Page 44
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.