This guide addresses only those items. You should use good judgment to identify potential safety hazards due to attachment of non-Lenovo features or options not covered by this inspection guide.
4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.
Grounding requirements Electrical grounding of the device is required for operator safety and correct system function. Proper grounding of the electrical outlet can be verified by a certified electrician. Safety notices (multilingual translations) The safety notices in this section are provided in the following languages: •...
• Damage caused by liquid spilled into the system • Damage caused by the improper insertion of a personal-computer card (PC card) or the installation of an incompatible card • Improper disc insertion or use of an external optical drive •...
Chapter 4. Removing a FRU or CRU Service tools The following table lists tools for servicing Lenovo computers. Tools with a cross mark are needed for serving the product models as described by this publication. Prepare them before you service the product.
Step 1. Press the button and slide down to remove the left and right game controllers. Figure 2. Remove the game controller Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Game controller Hardware Maintenance Manual...
Replace the controller guide L and R The current controller guides can be replaced with new ones (Part No: 5B40S22291). This CRU includes a left controller guide, a right controller guide, and six screws. Make sure the device has been shut down and the following FRU (or CRU) has been removed before servicing the device.
Number of screws M2 x L3 Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Controller guide L and R Remove the lower case Make sure the device has been shut down and the following FRU (or CRU) has been removed before servicing the device.
Figure 6. Pry up the latches and remove the lower case Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Lower case Disconnect the battery pack cable Make sure the following FRU (or CRU) has been removed.
Figure 8. Remove the LCD bracket Number of screws Screw specifications M1.6 x L3 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: LCD bracket Remove the SSD cable holder graphite Make sure the following FRU (or CRU) has been removed.
Figure 9. Remove the SSD cable holder graphite Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement parts: SSD cable holder graphite Remove the solid-state drive (SSD) Make sure the following FRU (or CRU) has been removed.
Figure 11. Remove the SSD mylar Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Solid-state drive (SSD) Solid-state drive (SSD) mylar Remove the speaker with antenna Make sure the following FRUs (CRUs) have been removed.
Figure 14. Remove the speaker with antenna Number of screws Screw specifications M1.6 x L5 Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Wi-Fi card mylar Speaker with antenna Remove the microphone cable Make sure the following FRUs (CRUs) have been removed.
Detach the microphone cable connector and release the cable from the cable guide. Then, remove the microphone cable. Figure 15. Remove the microphone cable Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Microphone cable Remove the battery pack bracket Make sure the following FRUs (CRUs) have been removed.
Figure 17. Remove the battery pack bracket Screw specifications Number of screws M1.6 x L5 Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Battery pack bracket Remove the fan Make sure the following FRUs (CRUs) have been removed.
Number of screws M1.6 x L5 Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Remove the heat sink Make sure the following FRUs (CRUs) have been removed. “Remove the game controller” on page 26 “Remove the lower case”...
Figure 20. Remove the heat sink Screw specifications Number of screws M2 x L2.5 Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Heat sink Remove the audio board Make sure the following FRUs (CRUs) have been removed.
Screw specifications Number of screws M1.6 x L3 Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Audio board Remove the power board cable Make sure the following FRUs (CRUs) have been removed. “Remove the game controller” on page 26 “Remove the lower case”...
Remove the power board cable. Figure 23. Remove the power board cable Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Power board cable Remove the system board and the system board cable Make sure the following FRUs (or CRUs) have been removed.
Page 46
Turn over the system board and then remove the system board cable from the system board. Figure 26. Remove the system board cable Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: Hardware Maintenance Manual...
The Golden Key U1 tool is prepared by running the U1 Update software on a FAT32-formatted USB thumb drive. Go to https://support.lenovo.com/us/en/solutions/ht102004 for detailed instructions on how to create and use a Golden Key U1 tool. Remove the pogo pin FPC cable L Make sure the following FRUs (or CRUs) have been removed.
Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: Pogo pin FPC cable L Remove the battery pack Make sure the following FRU (or CRU) has been removed. “Remove the game controller” on page 26 “Remove the lower case”...
Figure 29. Remove the pogo pin FPC cable R Screw specifications Number of screws M1.6 x L3 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: Pogo pin FPC cable R Removable tape Remove the microphone board Make sure the following FRUs (or CRUs) have been removed.
Page 50
“Remove the game controller” on page 26 “Remove the lower case” on page 28 “Disconnect the battery pack cable” on page 29 “Remove the LCD bracket” on page 30 “Remove the SSD cable holder graphite” on page 30 “Remove the solid-state drive (SSD)” on page 31 “Remove the speaker with antenna”...
“Remove the pogo pin FPC cable R” on page 43 “Remove the microphone board” on page 43 Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: LCD module Chapter 4 Removing a FRU or CRU...