hit counter script
Sony HCD-SHAKE33 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo System
  5. HCD-SHAKE33
  6. Service manual

Sony HCD-SHAKE33 Service Manual

Hide thumbs Also See for HCD-SHAKE33:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
Ver. 1.4 2014.12
14.12
• HCD-SHAKE33 is the tuner, USB, CD player, Bluetooth, NFC and
amplifier section in SHAKE-33.
• HCD-SHAKE55 is the tuner, USB, CD player, Bluetooth, NFC and
amplifier section in SHAKE-55.
• HCD-SHAKE77 is the tuner, USB, CD player, Bluetooth, NFC and
amplifier section in SHAKE-77.
• HCD-SHAKE44 is the tuner, USB, CD/DVD player, Bluetooth, NFC
and amplifier section in SHAKE-44D.
• HCD-SHAKE66 is the tuner, USB, CD/DVD player, Bluetooth, NFC
and amplifier section in SHAKE-66D.
• HCD-SHAKE88 is the tuner, USB, CD/DVD player, Bluetooth, NFC
and amplifier section in SHAKE-88D.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(US model only)
SHAKE-55
With 4 ohm loads, both channels driven, from
120 – 10,000 Hz; rated 180 watts per channel
minimum RMS power, with no more than 0.7%
total harmonic distortion from 250 milliwatts to
rated output.
SHAKE-33
With 4 ohm loads, both channels driven, from
40 – 600 Hz; rated 180 watts per channel minimum
RMS power, with no more than 0.7% total
harmonic distortion from 250 milliwatts to rated
output.
Amplifi er section
The following are measured at
US model:
AC 120 V, 60 Hz
MX model:
AC 120 V – 240 V, 60 Hz
AEP, UK, RU model:
AC 220 V – 240 V, 50/60 Hz
E51 model:
AC 220 V – 240 V, 50 Hz
Other models:
AC 120 V – 240 V, 50/60 Hz
SHAKE-77/88D
WF (Woofers)/MID (Mid speakers)/TW (Tweeters)
Power Output (rated):
350 W + 350 W (at 4 ohms, 1 kHz,
1% THD)
RMS output power (reference):
600 W + 600 W (per channel at
4 ohms, 1 kHz)
9-890-648-05
Sony Corporation
2014L80-1
©
2014.12
Published by Sony EMCS (Malaysia) PG Tec
HCD-SHAKE33/SHAKE44/SHAKE55/
SHAKE66/SHAKE77/SHAKE88
Photo: HCD-SHAKE77
CD/DVD
Section
SPECIFICATIONS
SW (Subwoofers)
RMS output power (reference):
1,200 W + 1,200 W (per channel at
8 ohms, 100 Hz)
SHAKE-55/66D
WF (Woofers)/TW (Tweeters)
Power Output (rated):
350 W + 350 W (at 4 ohms, 1 kHz,
1% THD)
RMS output power (reference):
600 W + 600 W (per channel at
4 ohms, 1 kHz)
SW (Subwoofers)
RMS output power (reference):
900 W + 900 W (per channel at
10 ohms, 100 Hz)
SHAKE-33/44D
WOOFERS
Power Output (rated):
350 W + 350 W (at 4 ohms, 100 Hz,
1% THD)
RMS output power (reference):
600 W + 600 W (per channel at
4 ohms, 100 Hz)
MID (Mid speakers)/TWEETERS
RMS output power (reference):
500 W + 500 W (per channel at
5 ohms, 1 kHz)
Inputs
AUDIO IN 1/PARTY CHAIN IN L/R
Voltage 2 V, impedance 47 kilohms
AUDIO IN 2 L/R
Voltage 2 V, impedance 47 kilohms
MIC (SHAKE-55/77 only)
Sensitivity 1 mV, impedance 10 kilohms
MIC 1, MIC 2 (SHAKE-44D/66D/88D)
Sensitivity 1 mV, impedance 10 kilohms
(USB) A,
(USB) B port
Type A
HCD-SHAKE33/SHAKE44/SHAKE55/
HCD-SHAKE33/SHAKE55/SHAKE77
HCD-SHAKE44/SHAKE66/SHAKE88
Saudi Arabia Model
South African Model
Model Name Using Similar Mechanism
CD Mechanism Type
Optical Pick-up Name
Outputs
AUDIO OUT/PARTY CHAIN OUT L/R
Voltage 2 V, impedance 1 kilohm
VIDEO OUT (SHAKE-44D/66D/88D)
Max. output level 1 Vp-p, unbalanced,
Sync. negative load impedance
75 ohms
USB section
Supported bit rate
WMA:
48 kbps – 192 kbps, VBR, CBR
AAC:
48 kbps – 320 kbps, VBR, CBR
Sampling frequencies
WMA: 44.1 kHz
AAC: 44.1 kHz
Supported USB device
Mass Storage Class
Maximum current
500 mA
Disc/USB section
Supported bit rate
MPEG1 Layer-3:
32 kbps – 320 kbps, VBR
MPEG2 Layer-3:
8 kbps – 160 kbps, VBR
MPEG1 Layer-2:
32 kbps – 384 kbps, VBR
Sampling frequencies
MPEG1 Layer-3:
32 kHz/44.1 kHz/48 kHz
MPEG2 Layer-3:
16 kHz/22.05 kHz/24 kHz
MPEG1 Layer-2:
HOME AUDIO SYSTEM
32 kHz/44.1 kHz/48 kHz
US Model
HCD-SHAKE33/SHAKE55
AEP Model
UK Model
HCD-SHAKE33
Russian Model
HCD-SHAKE66
E Model
SHAKE66/SHAKE77/SHAKE88
Argentina Model
Mexican Model
Australian Model
HCD-SHAKE77
Malaysia Model
Thai Model
HCD-SHAKE44/SHAKE88
NEW
CDM90-DVBU202//M
CMS-S76RFS7G
Xvid (SHAKE-44D/66D/88D)
Video codec: Xvid video
Bit rate: 4.854 Mbps (MAX)
Resolution/Frame rate:
720 × 480 30 fps
720 × 576 25 fps
Audio codec: MP3
MPEG4 (SHAKE-44D/66D/88D)
File format: MP4 File Format
Video codec:
MPEG4 Simple Profile
(AVC is not compatible.)
Bit rate: 4 Mbps
Resolution/Frame rate:
720 × 576 30 fps
Audio codec: AAC-LC
(HE-AAC is not compatible.)
DRM: Not compatible
Disc player section
System
Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6 μW
* This output is the value measurement
at a distance of 200 mm from the
objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
Frequency response
20 Hz – 20 kHz
– Continued on next page –

Advertisement

Table of Contents
loading

Related Manuals for Sony HCD-SHAKE33

Summary of Contents for Sony HCD-SHAKE33

  • Page 1 Argentina Model Photo: HCD-SHAKE77 Mexican Model HCD-SHAKE33/SHAKE55/SHAKE77 Australian Model • HCD-SHAKE33 is the tuner, USB, CD player, Bluetooth, NFC and amplifier section in SHAKE-33. HCD-SHAKE77 • HCD-SHAKE55 is the tuner, USB, CD player, Bluetooth, NFC and Malaysia Model amplifier section in SHAKE-55.
  • Page 2 Bluetooth 2. A battery-operated AC milliammeter. The Data Precision 245 Other models: SIG, Inc. and any use of such marks by Sony 531 kHz – 1,602 kHz (9 kHz step) digital multimeter is suitable for this job.

  • Page 3: Table Of Contents

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 TABLE OF CONTENTS SERVICING NOTES ..........6-21. Schematic Diagram - 6CH DAMP Board (EXCEPT SHAKE33/SHAKE44) (1/3) - ....... 52 DISASSEMBLY 6-22. Schematic Diagram - 6CH DAMP Board (EXCEPT SHAKE33/SHAKE44) (2/3) - ....... 53 2-1. Overall Case ..............10 6-23.

  • Page 4: Servicing Notes

    (Caution: Some printed circuit boards may not come printed with HCD-SHAKE88: SAF, EA, MY, E4 4-479-323-3[] the lead free mark due to their particular size) HCD-SHAKE88: TH 4-479-323-4[] HCD-SHAKE33 : E2, E51, AR 4-479-422-0[] : LEAD FREE MARK HCD-SHAKE33 : US 4-479-422-1[] Unleaded solder has the following characteristics.
  • Page 5 1. Press [ ] button to turn the power on. Bluetooth device. 2. Press the [CD] (SHAKE33/SHAKE55/SHAKE77) / [DVD/ For example, select “SONY:SHAKE-88D” (or SHAKE-33/ CD] (SHAKE44/SHAKE66/SHAKE88)] button to select CD/ SHAKE-44D/SHAKE-55/SHAKE-66D/SHAKE-77). If DVD function. passkey is required on the Bluetooth device, enter “0000”.
  • Page 6 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 NOTE OF REPLACING THE COMPLETE MOTHERBOARD Playing music from a Bluetooth device BOARD (SHAKE55: US / SHAKE66: MY / SHAKE88: EA) For a Bluetooth device The COMPLETE MOTHERBOARD BOARD for this unit has been changed in the midway of production.
  • Page 7 Note: Push after it inserts it in this hole well. – Top view – CAPACITOR DISCHARGE FOR ELECTRIC SHOCK PREVENTION Switching Regulator Board (Conductor side view) (HCD-SHAKE33/SHAKE44) In checking the Switching Regulator board, make 3 capacitors discharge of C221, C602 and C618 for eletrical shock prevention. 800 /5 W...
  • Page 8 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 Switching Regulator Board (Conductor side view) (HCD-SHAKE55/SHAKE66/SHAKE77/SHAKE88) In checking the Switching Regulator board, make 3 capacitors discharge of C20, C28 and C18 for eletrical shock prevention. 800 /5 W 800 /5 W 800 /5 W PRECAUTION WHEN INSTALLING A NEW OP UNIT/PRECAUTION BEFORE UNSOLDERING THE STATIC ELECTRICITY PREVENTION SOLDER BRIDGE (CDM90-DVBU202//M) When installing a new OP unit, be sure to connect the fl...

  • Page 9: Disassembly

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 SECTION 2 DISASSEMBLY Note: Disassemble the unit in the order as shown below. 2-1. OVERALL CASE (Page 10) 2-2. BACK PANEL SECTION (Page 11) 2-3. LOADING PANEL ASSY (Page 11) 2-4. CDM90-DVBU202//M (Page 12) 2-5. FRONT PANEL SECTION (Page 13) 2-6.

  • Page 10: Overall Case

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 Note: Follow the disassembly procedure in the numerical order given. 2-1. OVERALL CASE 2 two screws (+BVTP 3 8) (BLACK) 3 protector, rear L 1 four screws (+BVTP 3 8) (BLACK) 9 case, overall 6 three screws...

  • Page 11: Back Panel Section

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 2-2. BACK PANEL SECTION 6CH DAMP board rear side MOTHERBOARD board 4 two screws (+BVTP 3 8) (BLACK) 1 CN1002 (3P) 5 two screws (EXCEPT SHAKE33/SHAKE44) (+BVTP 3 8) (BLACK) CN1003 (3P) (SHAKE33/SHAKE44) 6 three screws (+BVTP 3...

  • Page 12: Cdm90-Dvbu202//M

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 2-4. CDM90-DVBU202//M CDM90-DVBU202//M rear side 6 four screws (+BVTP 3 MOTHERBOARD board 9 CDM90-DVBU202//M 1 CN401 (6P) 7 boss 3 wire (flat type) (24 core) Note: When you install the CD (CN302) drive (CDM90-DVBU202//M), please match the position of the boss two places.

  • Page 13: Front Panel Section

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 2-5. FRONT PANEL SECTION 2 wire (flat type) (23 core) (CN109) 1 wire (flat type) (10 core) (CN102) 5 one screw (+PWH 3 8 (SUMITITE)) 7 front panel section 3 wire (flat type) (8 core) (CN105) 4 five screws (+BVTP 3 2-6.

  • Page 14: 4Ch Damp Board (Shake33/Shake44), 6Ch Damp Board (Except Shake33/Shake44)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 2-7. 4CH DAMP BOARD (SHAKE33/SHAKE44), 6CH DAMP BOARD (EXCEPT SHAKE33/SHAKE44) front side bracket, tunnel (M7) bracket, tunnel (M3) 6CH DAMP board REGULATOR, SWITCHING (3H401W) front side 3 two screws 2 four screws (+BVTP 3 (+BVTP 3 2 two screws...

  • Page 15: Regulator, Switching (3H401W) (Shake33/Shake44), Regulator, Switching (Ssnbpr) (Shake55/Shake66), Regulator, Switching (Ssngbr) (Shake77/Shake88)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.4 2-8. REGULATOR, SWITCHING (3H401W) (SHAKE33/ SHAKE44), REGULATOR, SWITCHING (SSNBPR) (SHAKE55/SHAKE66), REGULATOR, SWITCHING (SSNGBR) (SHAKE77/SHAKE88) (SHAKE33/SHAKE44) (EXCEPT SHAKE33/SHAKE44) 1 three screws 1 three screws (+BV3 (3-CR)) (+BV3 (3-CR)) 2 chassis, sub (M7) 2 chassis, sub (M7) 1 three screws...

  • Page 16: Service Optical Device, Wire (Flat Type)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 2-9. SERVICE OPTICAL DEVICE, WIRE (FLAT TYPE) Note 1 : Before disconnecting the wire (fl at type) (24 core) of optical pick-up block, solder the short-land. 2 chuck holder assy (T) 2 Solder the short-land. 1 six claws...

  • Page 17: Test Mode

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 SECTION 3 TEST MODE [PANEL TEST MODE] [COLD RESET] This mode is used to check the fl uorescent indicator tube, LEDs, The cold reset clears all data including preset data stored in the keys, [VOLUME/DJ CONTROL] jog, model, destination and data fl...
  • Page 18 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 [HISTORY MODE] This mode is used to check important data stored in the system when PROTECTOR happen. Procedure: 1. During demo mode, press [OPTIONS] / [X] button and [FLANGER] button for 5 seconds to mode into history mode.
  • Page 19 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 [MODEL & DEST WRITE MODE] [DVD COLOR SYSTEM MODE] This mode is used to set software model & destination. • This mode let you change the color system of the video output This mode only available when no permanent model & destination from PAL to NTSC or vice-versa.
  • Page 20 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 • Execute IOP Measurement • Check Emergency History In order to execute IOP measurement, the following standard To check the emergency history, please follow the following procedures must be followed. procedure. 1. From the Top Menu of Remocon Diagnosis Menu, select 1.
  • Page 21 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 • Parameter of error code To return to the Top Menu of Remocon Diagnosis Menu This is the detail of error code. Press the [0] button on the remote commander. Example of Error code • Check Version Information To check the version information, please follow the following 1.

  • Page 22: Electrical Check

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 SECTION 4 ELECTRICAL CHECK FOCUS BIAS CHECK TUNER SECTION 0 dB = 1 V oscilloscope FM AUTO STOP CHECK (DC range) signal MOTHERBOARD board generator CN302 pin 17 (RFMON) CN302 pin 1 (GND) – Procedure: 1. Connect the oscilloscope to CN302 pin 17 (RFMON) and CN302 pin 1 (GND) on the MOTHERBOARD board.

  • Page 23: Troubleshooting

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 SECTION 5 TROUBLESHOOTING...
  • Page 24 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1...
  • Page 25 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1...
  • Page 26 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1...
  • Page 27 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1...
  • Page 28 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1...
  • Page 29 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.4...
  • Page 30 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1...

  • Page 31: Diagrams

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 SECTION 6 Ver. 1.1 DIAGRAMS 6-1. BLOCK DIAGRAM - RS SERVO, USB Section - IC301 (1/2) VOA/A VOB/B VOC/C VOD/D XTALO 8 X451 X301 XTALI MDI1 (SHAKE33/SHAKE44) (EXCEPT SHAKE33/SHAKE44) AUTO LDO1 Q402 23 DM0 PLAY 24 DP0 AUTO LD(650)

  • Page 32: Block Diagram - Main Section

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 6-2. BLOCK DIAGRAM - MAIN Section - AUDIO PARTY CHAIN OUT J602 (2/2) SIGNAL EXCEPT SHAKE33 SELECTOR OP AMP ANALOG IC602 IC601 STEREO A/D SELECTOR MIC AMP J2201 CONVERTER Q605, Q607 IC2201 MIC 1 IC609 OUT 1...

  • Page 33: Block Diagram - Amp Section (Shake33/Shake44)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 6-3. BLOCK DIAGRAM - AMP Section (SHAKE33/SHAKE44) - SHAKE33/SHAKE44 POWER AMP TB1000 OP AMP +63V IC1009 IC1015 DIGITAL AUDIO MOSFET OP AMP Q1023 PGND GRAY OUT_1 IC612 (1/2) VS 13 RESET FRONT-L 3 +IN_1 SWITCH DIGITAL AUDIO MOSFET...

  • Page 34: Block Diagram - Amp Section (Except Shake33/Shake44)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 6-4. BLOCK DIAGRAM - AMP Section (EXCEPT SHAKE33/SHAKE44) - EXCEPT SHAKE33/SHAKE44 OP AMP POWER AMP +63V TB1000 IC1018 IC1004 IMPEDANCE OP AMP DIGITAL AUDIO MOSFET IC612 WF/MID/TW Q1009 PGND OUT_1 FRONT-L 3 +IN_1 VS 13 LEFT OUT_2 7...

  • Page 35: Block Diagram - Panel, Power Supply Section

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-5. BLOCK DIAGRAM - PANEL, POWER SUPPLY Section - SPM-C-MON VACUUM PROTECTION CONTROL PCONT-DAMP FLUORESCENT FL-SOUT Q576 +3.3V REG. DISPLAY FL-CLK IC002 ND2001 POWER CONTROL FL-LATCH (SHAKE33/SHAKE44) PCONT-BTSTBY PROTECTION PROTECTION CONTROL ND2000 134 FL-BK Q009 +1.2V VIN1...
  • Page 36 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 • Note for Printed Wiring Boards and Schematic Diagrams • Circuit Boards Location Note on Printed Wiring Board: Note on Schematic Diagram: • X : parts extracted from the component side. • All capacitors are in μF unless otherwise noted. (p: pF) •...

  • Page 37: Printed Wiring Board - Motherboard Board (Component Side)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 6-6. PRINTED WIRING BOARD - MOTHERBOARD Board (Component Side) - • See page 36 for Circuit Boards Location. • : Uses unleaded solder. MOTHERBOARD BOARD (COMPONENT SIDE) J602 SHAKE33 VIDEO BOARD SHAKE44 AUDIO IN 1 AUDIO OUT...

  • Page 38: Motherboard Board (Conductor Side)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.4 6-7. PRINTED WIRING BOARD - MOTHERBOARD Board (Conductor Side) - • See page 36 for Circuit Boards Location. • : Uses unleaded solder. MOTHERBOARD BOARD (CONDUCTOR SIDE) SHAKE33 SHAKE44 SHAKE55 SHAKE66 SHAKE77 SHAKE88 SERVICE USE CN502 LED SPEAKER...

  • Page 39: Schematic Diagram - Motherboard Board (1/8)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 6-8. SCHEMATIC DIAGRAM - MOTHERBOARD Board (1/8) - • See page 72 for IC Block Diagrams. >007S MOTHERBOARD BOARD (1/8) DIN1 ARAGON-BCK3 MOTHER- ARAGON-LRCK3 BOARD >001S BOARD DIN3 MOTHERBOARD BOARD (2/8) SRC-RST0 (8/8) DOUT3 (Page 40) (Page 46)

  • Page 40: Schematic Diagram - Motherboard Board (2/8)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 6-9. SCHEMATIC DIAGRAM - MOTHERBOARD Board (2/8) - • See page 72 for IC Block Diagrams. >010S >009S >005S MOTHERBOARD BOARD (8/8) MOTHERBOARD BOARD (3/8) MOTHERBOARD BOARD (1/8) (Page 46) (Page 41) (Page 39) CN851 JL905 MOTHERBOARD BOARD (2/8)

  • Page 41: Schematic Diagram - Motherboard Board (3/8)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-10. SCHEMATIC DIAGRAM - MOTHERBOARD Board (3/8) - • See page 72 for IC Block Diagrams. • See page 79 for IC Pin Function Descriptions. >016S >008S MOTHERBOARD >017S MOTHERBOARD BOARD MOTHERBOARD BOARD (3/8) BOARD MOTHERBOARD (1/8)

  • Page 42: Schematic Diagram - Motherboard Board (4/8)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-11. SCHEMATIC DIAGRAM - MOTHERBOARD Board (4/8) - • See page 72 for IC Block Diagrams. MOTHERBOARD BOARD (4/8) R433 CL413 FE_3.3V_1 CL412 CL415 CL414 Q402 Q401 2SA2119K 2SA2119K AUTO POWER AUTO POWER C420 C423 R431 CTRL...

  • Page 43: Schematic Diagram - Motherboard Board (5/8)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-12. SCHEMATIC DIAGRAM - MOTHERBOARD Board (5/8) - • See page 71 for Waveforms. • See page 72 for IC Block Diagrams. MOTHERBOARD BOARD (5/8) C454 C456 C457 0.1u X451 12MHz >030S 3.3 3.3 3.3 1.1 >029S...

  • Page 44: Schematic Diagram - Motherboard Board (6/8)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 6-13. SCHEMATIC DIAGRAM - MOTHERBOARD Board (6/8) - >034S >036S >033S MOTHERBOARD BOARD (5/8) MOTHERBOARD BOARD (7/8) MOTHERBOARD BOARD (5/8) (Page 43) (Page 45) (Page 43) MOTHERBOARD BOARD (6/8) JC010 JL059 FL+13V C088 EXCEPT 220u SHAKE33 >037S >039S...

  • Page 45: Schematic Diagram - Motherboard Board (7/8)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-14. SCHEMATIC DIAGRAM - MOTHERBOARD Board (7/8) - • See page 72 for IC Block Diagrams. MOTHERBOARD BOARD (7/8) >037S LED+5.2V MOTHERBOARD BOARD (6/8) EVER+13V CN107 (Page 44) D105 D104 CN111 RB520SM-30T2R RB520SM-30T2R DEBUG-RXD(MD-BOOT1) JL196 MD BOOT1...

  • Page 46: Schematic Diagram - Motherboard Board (8/8)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.4 6-15. SCHEMATIC DIAGRAM - MOTHERBOARD Board (8/8) - • See page 71 for Waveforms. • See page 72 for IC Block Diagrams. • See page 79 for IC Pin Function Descriptions. MOTHERBOARD BOARD (8/8) >026S MOTHERBOARD R113 HUB-RST >040S...

  • Page 47: Printed Wiring Board

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.4 6-16. PRINTED WIRING BOARD - 4CH DAMP Board (SHAKE33/SHAKE44) - • See page 36 for Circuit Boards Location. • : Uses unleaded solder. 4CH DAMP BOARD 4CH DAMP BOARD (SHAKE33/SHAKE44) (SHAKE33/SHAKE44) (COMPONENT (CONDUCTOR SIDE) TB1000 TB1001 WOOFERS...

  • Page 48: 4Ch Damp Board (Shake33/Shake44) (1/2)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-17. SCHEMATIC DIAGRAM - 4CH DAMP Board (SHAKE33/SHAKE44) (1/2) - R1000 4CH DAMP BOARD R1001 120k (SHAKE33/ R1002 SHAKE44) R1003 C1000 Q1003 4.7u LTA014EUBFS8TL R1010 R1004 (1/2) PROTECTION SWITCH 120k CL1035 C1004 C1006 22u 35V C1005 22u 35V...

  • Page 49: 4Ch Damp Board (Shake33/Shake44) (2/2)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-18. SCHEMATIC DIAGRAM - 4CH DAMP Board (SHAKE33/SHAKE44) (2/2) - • See page 72 for IC Block Diagrams. >049S 4CH DAMP BOARD 4CH DAMP C1166 (SHAKE33/SHAKE44) R1646 BOARD GVDD 470p CL1074 R1195 (2/2) (SHAKE33/ PGND R1199 R1197...

  • Page 50: Printed Wiring Board - 6Ch Damp Board (Except Shake33/Shake44) (Component Side)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-19. PRINTED WIRING BOARD - 6CH DAMP Board (EXCEPT SHAKE33/SHAKE44) (Component Side) - • See page 36 for Circuit Boards Location. • : Uses unleaded solder. 6CH DAMP BOARD (EXCEPT SHAKE33/ TB1000 TB1001 LEFT SPEAKERS RIGHT SPEAKERS...

  • Page 51: Printed Wiring Board - 6Ch Damp Board (Except Shake33/Shake44) (Conductor Side)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 6-20. PRINTED WIRING BOARD - 6CH DAMP Board (EXCEPT SHAKE33/SHAKE44) (Conductor Side) - • See page 36 for Circuit Boards Location. • : Uses unleaded solder. 6CH DAMP BOARD (EXCEPT SHAKE33/SHAKE44) (CONDUCTOR SIDE) Q1018, Q1047, Q1056 CL1211...

  • Page 52: 6-21. Schematic Diagram - 6Ch Damp Board

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-21. SCHEMATIC DIAGRAM - 6CH DAMP Board (EXCEPT SHAKE33/SHAKE44) (1/3) - R1000 6CH DAMP BOARD R1001 120k (EXCEPT R1002 SHAKE33/ R1003 Q1003 LTA014EUBFS8TL R1010 C1000 R1004 SHAKE44) PROTECTION SWITCH 4.7u 120k (1/3) CL1035 C1004 C1006 100u 35V...

  • Page 53: Schematic Diagram - 6Ch Damp Board

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-22. SCHEMATIC DIAGRAM - 6CH DAMP Board (EXCEPT SHAKE33/SHAKE44) (2/3) - • See page 72 for IC Block Diagrams. >055S >056S 6CH DAMP BOARD 6CH DAMP BOARD (EXCEPT SHAKE33/SHAKE44) (1/3) (EXCEPT SHAKE33/SHAKE44) (1/3) (Page 52) (Page 52)

  • Page 54: Schematic Diagram - 6Ch Damp Board

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-23. SCHEMATIC DIAGRAM - 6CH DAMP Board (EXCEPT SHAKE33/SHAKE44) (3/3) - • See page 72 for IC Block Diagrams. >060S 6CH DAMP BOARD (EXCEPT SHAKE33/ SHAKE44) (2/3) (Page 53) 6 7 8 9 10 6CH DAMP BOARD...

  • Page 55: Printed Wiring Board

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-24. PRINTED WIRING BOARD - STR Board (SHAKE33/SHAKE44) - • See page 36 for Circuit Boards Location. • : Uses unleaded solder. STR BOARD (SHAKE33/SHAKE44) S2103 S2102 BLUETOOTH CONNECTION – PAIRING ENTER CL2124 IC2101 D2107 CL2123 R2103...

  • Page 56: Schematic Diagram - Str Board (Shake33/Shake44)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-25. SCHEMATIC DIAGRAM - STR Board (SHAKE33/SHAKE44) - • See page 72 for IC Block Diagrams. STR BOARD (SHAKE33/SHAKE44) S2101 REC TO USB B CL2123 R2101 S2102 ENTER CN2101 CL2124 C2102 10u 35V CL2101 LED +5V R2102...

  • Page 57: Printed Wiring Board - Str Board (Except Shake33/Shake44) (Component Side)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-26. PRINTED WIRING BOARD - STR Board (EXCEPT SHAKE33/SHAKE44) (Component Side) - • See page 36 for Circuit Boards Location. • : Uses unleaded solder. STR BOARD FL BOARD (EXCEPT SHAKE33/SHAKE44) (EXCEPT SHAKE33/SHAKE44) CN2003 (COMPONENT SIDE) (Page 62) >014P...

  • Page 58: Printed Wiring Board - Str Board (Except Shake33/Shake44) (Conductor Side)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 6-27. PRINTED WIRING BOARD - STR Board (EXCEPT SHAKE33/SHAKE44) (Conductor Side) - • See page 36 for Circuit Boards Location. • : Uses unleaded solder. STR BOARD (EXCEPT SHAKE33/SHAKE44) (CONDUCTOR SIDE) CL2193 CL2102 CL2103 CL2104 CL2123 CL2121...

  • Page 59: Schematic Diagram - Str Board (Except Shake33/Shake44)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-28. SCHEMATIC DIAGRAM - STR Board (EXCEPT SHAKE33/SHAKE44) - • See page 72 for IC Block Diagrams. STR BOARD (EXCEPT SHAKE33/SHAKE44) CN2102 CL2121 POWER KEY CL2102 VOL_BLUE2 CL2103 VOL_GREEN2 CL2104 VOL_RED2 CL2105 VOL_BLUE1 CL2106 VOL_GREEN1 CL2107 VOL_RED1 CL2108 >062S...

  • Page 60: Printed Wiring Board

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 6-29. PRINTED WIRING BOARD - FL Board (SHAKE33/SHAKE44) - • See page 36 for Circuit Boards Location. • : Uses unleaded solder. FL BOARD (SHAKE33/SHAKE44) >006P ND2001 VACUUM FLUORESCENT DISPLAY MOTHERBOARD BOARD CL2031 CN109 CL2029 (Page 37)

  • Page 61: Schematic Diagram - Fl Board (Shake33/Shake44)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-30. SCHEMATIC DIAGRAM - FL Board (SHAKE33/SHAKE44) - FL BOARD (SHAKE33/SHAKE44) ND2001 VACUUM FLUORESCENT DISPLAY CN2002 D2001 IL0353W61B3MKE01 CL2046 LED +5V LEFT WING CL2047 JR2001 LED GND CL2048 LED +5V LED GND CL2050 CL2001 CL2021 LED R-WING...

  • Page 62: Printed Wiring Board - Fl Board (Except Shake33/Shake44) (Component Side)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 6-31. PRINTED WIRING BOARD - FL Board (EXCEPT SHAKE33/SHAKE44) (Component Side) - • See page 36 for Circuit Boards Location. • : Uses unleaded solder. FL BOARD MOTHERBOARD (EXCEPT SHAKE33/SHAKE44) BOARD >007P (COMPONENT SIDE) CN109 (Page 37)

  • Page 63: Printed Wiring Board - Fl Board (Except Shake33/Shake44) (Conductor Side)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 6-32. PRINTED WIRING BOARD - FL Board (EXCEPT SHAKE33/SHAKE44) (Conductor Side) - • See page 36 for Circuit Boards Location. • : Uses unleaded solder. FL BOARD (EXCEPT SHAKE33/SHAKE44) (CONDUCTOR SIDE) CL2001 CL2036 CL2023 CL2021 CL2043 CL2042...

  • Page 64: Schematic Diagram - Fl Board (Except Shake33/Shake44)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-33. SCHEMATIC DIAGRAM - FL Board (EXCEPT SHAKE33/SHAKE44) - • See page 72 for IC Block Diagrams. FL BOARD (EXCEPT SHAKE33/SHAKE44) D2007 D2001 D2006 SMLVN6RGB1U17QYB SMLVN6RGB1U17QYB SMLVN6RGB1U17QYB D2010 SMLVN6RGB1U17QYB D2012 SMLVN6RGB1U17QYB R2030 R2032 R2033 R2034 R2037 R2038...

  • Page 65: Printed Wiring Board

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 6-34. PRINTED WIRING BOARD - MIC Board (SHAKE33/SHAKE44) - • See page 36 for Circuit Boards Location. • : Uses unleaded solder. MIC BOARD (SHAKE33/SHAKE44) J2201 J2202 MIC 1 MIC 2 SHAKE44 SHAKE33/SHAKE44 CN2203 CN2204 RV2206 MIC LEVEL...

  • Page 66: Schematic Diagram

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-35. SCHEMATIC DIAGRAM - MIC Board (SHAKE33/SHAKE44) - MIC BOARD (SHAKE33/SHAKE44) CN2204 CN2201 >029S CL2207 USB B +5V MOTHERBOARD CL2208 JR2204 CL2209 JR2205 BOARD REC/PLAY D- B (5/8) D+ B C2212 C2213 CN451 D2204 D2205 D2206 D2211...

  • Page 67: Printed Wiring Board

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 6-36. PRINTED WIRING BOARD - MIC Board (EXCEPT SHAKE33/SHAKE44) - • See page 36 for Circuit Boards Location. • : Uses unleaded solder. MIC BOARD (EXCEPT SHAKE33/SHAKE44) (COMPONENT SIDE) J2202 J2201 MIC 2 MIC 1 SHAKE55/SHAKE77 CN2204...

  • Page 68: Schematic Diagram - Mic Board (Except Shake33/Shake44)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-37. SCHEMATIC DIAGRAM - MIC Board (EXCEPT SHAKE33/SHAKE44) - MIC BOARD (EXCEPT SHAKE33/SHAKE44) CN2204 CN2201 >030S JC011 JC016 CL2214 USB B +5V MOTHERBOARD CL2215 JR2204 BOARD CL2216 JR2205 REC/PLAY (5/8) D- B D+ B CN451 C2229 C2231...

  • Page 69: 6-38. Printed Wiring Board - Tuner Board

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 6-38. PRINTED WIRING BOARD - TUNER Board - • See page 36 for Circuit Boards Location. • : Uses unleaded solder. TUNER BOARD TUNER BOARD (COMPONENT SIDE) (CONDUCTOR SIDE) ANTENNA FM/AM CN3000 D3000 D3002 CL3001 CL3002 CL3003...

  • Page 70: 6-39. Schematic Diagram - Tuner Board

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 6-39. SCHEMATIC DIAGRAM - TUNER Board - • See page 72 for IC Block Diagrams. TUNER BOARD CL3005 L3004 R3007 2.2nH 3.3 5.5 C3005 C3007 C3008 IC3001 X3000 C3004 MM3404A33URE 0.0022u 12MHz C3003 IC3001 R3003 C3013 C3011 +3.3V REG.

  • Page 71: Printed Wiring Board - Video Board (Shake44/Shake66/Shake88)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6-40. PRINTED WIRING BOARD – VIDEO Board (SHAKE44/SHAKE66/SHAKE88) – • Waveforms • • See page 36 for Circuit Boards Location. : Uses unleaded solder. – MOTHERBOARD Board – IC451 8 (X2) VIDEO BOARD VIDEO BOARD (SHAKE44/SHAKE66/SHAKE88) (SHAKE44/SHAKE66/SHAKE88)
  • Page 72 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 • IC Block Diagrams IC2000 TC62D723FNG (FL BOARD) (EXCEPT SHAKE33/SHAKE44) IC502 TC62D723FNG (MOTHERBOARD BOARD (5/8)) IC2101 TC62D723FNG (STR BOARD) (EXCEPT SHAKE33/SHAKE44) IC1009, IC1011, IC1012, IC1014 IRS2092STRPBF-CU (4CH DAMP BOARD (2/2)) (SHAKE33/SHAKE44) IC2102 TC62D723FNG (STR BOARD) (SHAKE33/SHAKE44) IC1004, IC1006, IC1008 IRS2092STRPBF-CU (6CH DAMP BOARD (2/3)) (EXCEPT SHAKE 33/SHAKE44)
  • Page 73 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 IC103 BU4229F-TR (MOTHERBOARD BOARD (7/8)) Vout – Vref IC106 MX25L3235EM2I-10G (MOTHERBOARD BOARD (8/8)) Address Generator Memory Array Page Buffer HOLD Data Register Y-Decoder SRAM Buffer Sense Amplifier Mode State Logic Machine Generator Clock Generator GND 4 Output...
  • Page 74 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 IC302 W25Q16CVSSIG-R (MOTHERBOARD BOARD (3/8)) (SHAKE33/SHAKE55/SHAKE77) IC302 W25Q32BVSSIG-R (MOTHERBOARD BOARD (3/8)) (SHAKE44/SHAKE66/SHAKE88) Write Control Logic HOLD Status Register High Voltage Generators Page Address Latch / Counter Command and Column Decode Control Logic and 256 Byte Page Buffer...
  • Page 75 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 IC401 AM5890S (MOTHERBOARD BOARD (4/8)) Vcc2 Voltage Detection MUTE Actuator Spindle Driver (6X) Driver (4X) Thermal Shut down Vcc2 Vcc2 Vcc1 Sled Actuator Driver (4X) Driver (6X) Pre-DRV TRAY DRIVER IC451 GL850G-OGY33 (MOTHERBOARD BOARD (5/8)) USPORT FRTIMER...
  • Page 76 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 IC452 BA2903FV-E2 (MOTHERBOARD BOARD (5/8)) – IC602, IC605 SN74LV4052APWR (MOTHERBOARD BOARD (1/8)) 2-COM 1-COM IC604 PCM1754DBQR (MOTHERBOARD BOARD (1/8)) IC611, IC615 PCM1754DBQR (MOTHERBOARD BOARD (2/8)) SYSTEM SYSTEM 16 SCK CLOCK CLOCK MANAGER AUDIO SERIAL DATA SERIAL CONTROL...
  • Page 77 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 IC606 PCM1808PWR (MOTHERBOARD BOARD (1/8)) IC609 PCM1808PWR (MOTHERBOARD BOARD (1/8)) (EXCEPT SHAKE33) LRCK Serial Interface Mode/ MOD0 Format MOD1 Control Clock SCKI Timing Control x1/64 Decimation Filter with High Pass Filter DGND Delta Sigma Delta Sigma Modulator...
  • Page 78 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 IC610 SRC4182 (MOTHERBOARD BOARD (1/8)) DECIMATION REFERENCE INTERPOLATION RE-SAMPLER RCKI FILTERS CLOCK FILTERS 28 MODE2 SDIN 27 MODE1 AUDIO BCKI INPUT 26 MODE0 PORT LRCKI RATE ESTIMATOR 25 BCKO AUDIO 24 LRCKO OUTPUT 23 SDOUT PORT DGND...
  • Page 79 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 • IC Pin Function Descriptions MOTHERBOARD BOARD (8/8) IC101 R7S7200022CFP (SYSTEM CONTROLLER) Pin No. Pin Name Description SRC-RST0 SRC Reset pin VIDEO-MUTE Muting Control for Video CDM-UNLOAD-SW CDM UNLOAD SW CDM-LOAD-SW CDM LOAD SW BT-RESET Reset signal output to Bluetooth section Not used Power supply terminal (+3.3V)
  • Page 80 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 Pin No. Pin Name Description SSI1_DI Data In Signal from ADC to Aragon PCONT-BTSTBY BT Standby Power Control Pin. “H”: ON PCONT-PSAVE-PRO- Main power on/off control signal output “H”:power on TECT Power supply terminal (+3.3V) LINK-DET Party chain input bias detection pin...
  • Page 81 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 Pin No. Pin Name Description PVcc Power supply terminal (+3.3V) TEST-MON4/SD_D0_0 Test port for software checking. ANALOG-CSEL/ Multiplexer selector C for Analog input SD_D1_0 RGB-TRANS-LED- Transfer signal to RGB driver (driver for Speaker LED) SPK/SD_WP_0 RGB-TRANS-LED/ Transfer signal to RGB driver...
  • Page 82 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 Pin No. Pin Name Description Ground terminal MTK-POWER-CTRL Power Control pin for MTK C-CONT Trigger port to start charging of SPM Q-Flash-SIO2 QSPI: Data I/O pins for channel 0 Q-Flash-SIO3 QSPI: Data I/O pins for channel 0...
  • Page 83 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 MOTHERBOARD BOARD (3/8) IC301 CXD90013R (CD RF AMP FOCUS/TRACKING ERROR AMP CD SYSTEM PROCESSOR DIGITAL SERVO PROCESSOR) (SHAKE33/SHAKE55/SHAKE77) Pin No. Pin Name Description RF_C RF main beam (A) input from the optical pick-up block RF_D RF main beam (D) input from the optical pick-up block...
  • Page 84 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 Pin No. Pin Name Description 57 to 60 RD4 to RD7 Two-way data bus with the SD-RAM DQM0 Data mask signal output to the SD-RAM (lower byte) 62 to 69 RD15 to RD8 Two-way data bus with the SD-RAM...
  • Page 85 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 MOTHERBOARD BOARD (3/8) IC301 CXD9990R (CD RF AMP FOCUS/TRACKING ERROR AMP CD SYSTEM PROCESSOR DIGITAL SERVO PROCESSOR) (SHAKE44/SHAKE66/SHAKE88) Pin No. Pin Name Description RF_C RF main beam C input from the optical pick-up block RF_D RF main beam D input from the optical pick-up block...
  • Page 86 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 Pin No. Pin Name Description Two-way data bus with the SD-RAM DVDD12 Power supply terminal (+1.2V) Two-way data bus with the SD-RAM Two-way data bus with the SD-RAM Two-way data bus with the SD-RAM Two-way data bus with the SD-RAM...
  • Page 87 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 Pin No. Pin Name Description ADACVSS1 Ground terminal ACLK Master clock signal output to the A/D converter and D/A converter ABCK Bit clock signal output to the A/D converter and D/A converter Not used AVCM Audio D/A converter reference voltage terminal...

  • Page 88: Exploded Views

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 SECTION 7 EXPLODED VIEWS Note: The components identifi ed by mark 0 • The mechanical parts with no reference • Abbreviation or dotted line with mark 0 are critical for number in the exploded views are not sup- : Argentina model safety.

  • Page 89: Back Panel Section

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 7-2. BACK PANEL SECTION not supplied not supplied CD MECHANISM (TUNER board) section supplied not supplied supplied not supplied not supplied (VIDEO board) (SHAKE44/SHAKE66/ SHAKE88) (EXCEPT SHAKE33) MOTHERBOARD board section (SHAKE55: US) front panel section Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement.

  • Page 90: Fl Board, Str Board

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.4 7-3. FL BOARD, STR BOARD not supplied supplied (SHAKE33/ SHAKE44) not supplied not supplied (STR board) (SHAKE33/ EN2101 SHAKE44) (EXCEPT SHAKE33/SHAKE44) not supplied RV2101 (SHAKE33/SHAKE44) front panel section ND2000 (EXCEPT SHAKE33/ SHAKE44) ND2001 (SHAKE33/SHAKE44) not supplied (SHAKE55: US/...

  • Page 91: Front Panel Section

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.4 7-4. FRONT PANEL SECTION (EXCEPT SHAKE33/ (SHAKE33/SHAKE44) SHAKE44) not supplied not supplied not supplied (EXCEPT SHAKE33/ SHAKE44) not supplied not supplied not supplied not supplied (SHAKE33/SHAKE44) not supplied Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement.

  • Page 92: Motherboard Board Section

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 7-5. MOTHERBOARD BOARD SECTION (SHAKE33/SHAKE44) (EXCEPT SHAKE33/SHAKE44) not supplied not supplied not supplied not supplied not supplied not supplied not supplied not supplied Note 1: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement.

  • Page 93: Chassis Section

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.4 7-6. CHASSIS SECTION (SHAKE33/SHAKE44) (EXCEPT SHAKE33/SHAKE44) not supplied not supplied (SHAKE77/ SHAKE88) supplied supplied not supplied not supplied supplied not supplied not supplied supplied not supplied E2, E4 supplied supplied supplied not supplied supplied (SHAKE33: US, AEP, UK/...

  • Page 94: Cd Mechanism Section (Cdm90-Dvbu202//M)

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 7-7. CD MECHANISM SECTION (CDM90-DVBU202//M) (including MS-476 board) not supplied not supplied not supplied not supplied not supplied not supplied (MS-476 board) supplied Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement.

  • Page 95: Electrical Parts List

    HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 SECTION 8 4CH DAMP ELECTRICAL PARTS LIST Note: • Due to standardization, replacements in The components identifi ed by mark 0 • SEMICONDUCTORS the parts list may be different from the or dotted line with mark 0 are critical for In each case, u: μ, for example:...
  • Page 96 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 4CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1231 1-116-173-91 CERAMIC CHIP 0.0022uF C1312 1-116-782-91 CERAMIC CHIP 2.2uF 100V C1232 1-100-761-21 CERAMIC CHIP 0.01uF 250V C1313 1-100-153-91 CERAMIC CHIP 220PF 100V...
  • Page 97 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 4CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < DIODE > Q1025 6-552-698-01 IRF6775MTR1PBF D1000 6-503-857-01 DI BAW56 Q1026 8-729-013-28 HN1B01FU D1001 6-500-514-01 DIODE BAV70 Q1027 8-729-427-72 TRANSISTOR XP4501 D1002 6-502-970-01...
  • Page 98 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 4CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1204 1-218-859-11 METAL CHIP 3.3K 0.5% 1/10W R1294 1-216-238-91 METAL CHIP 1/8W R1205 1-216-797-11 METAL CHIP 1/10W R1295 1-216-843-11 METAL CHIP 1/10W R1207...
  • Page 99 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 4CH DAMP 6CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1378 1-216-821-11 METAL CHIP 5%1/10W R1646 1-216-864-11 SHORT CHIP R1379 1-216-864-11 SHORT CHIP R1648 1-218-863-11 METAL CHIP 4.7K 0.5% 1/10W R1380...
  • Page 100 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 6CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1004 1-118-041-11 CERAMIC CHIP 4.7uF C1092 1-100-153-91 CERAMIC CHIP 220PF 100V C1005 1-112-800-11 ELECT CHIP 100uF * C1093 1-100-925-21 CERAMIC CHIP 0.0022uF 250V...
  • Page 101 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 6CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1198 1-118-933-11 ELECT (BLOCK) 3300uF C1389 1-118-373-11 CERAMIC CHIP 0.01uF (SHAKE55/SHAKE66) C1390 1-100-761-21 CERAMIC CHIP 0.01uF 250V C1199 1-118-626-11 ELECT 4700uF C1391 1-116-782-91 CERAMIC CHIP 2.2uF...
  • Page 102 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1490 1-128-992-21 ELECT CHIP 47uF D1087 6-504-003-01 DI RB578VAM100TR C1491 1-128-992-21 ELECT CHIP 47uF * D1092 6-503-578-01 DI RB520SM-30T2R C1492 1-128-992-21 ELECT CHIP...
  • Page 103 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q1051 8-729-013-28 HN1B01FU R1066 1-216-797-11 METAL CHIP 1/10W Q1052 6-552-698-01 IRF6775MTR1PBF R1067 1-218-827-11 METAL CHIP 0.5% 1/10W Q1055 6-552-698-01 IRF6775MTR1PBF R1069 1-216-827-11 METAL CHIP 3.3K...
  • Page 104 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1149 1-216-835-11 METAL CHIP 1/10W R1414 1-216-846-11 METAL CHIP 120K 1/10W (SHAKE55/SHAKE66) R1415 1-216-864-11 SHORT CHIP R1416 1-216-797-11 METAL CHIP 1/10W R1149 1-216-836-11...
  • Page 105 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1496 1-216-809-11 METAL CHIP 1/10W R1568 1-216-835-11 METAL CHIP 1/10W R1569 1-218-446-11 METAL CHIP 1/10W R1497 1-216-829-11 METAL CHIP 4.7K 1/10W R1570 1-216-791-11...
  • Page 106 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 6CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1692 1-216-833-11 METAL CHIP 1/10W C2010 1-126-965-91 ELECT 22uF R1693 1-216-827-11 METAL CHIP 3.3K 1/10W (SHAKE33/SHAKE44) R1694 1-216-827-11 METAL CHIP 3.3K 1/10W C2010 1-118-345-11 CERAMIC CHIP 0.01uF...
  • Page 107 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C2043 1-164-227-11 CERAMIC CHIP 0.022uF JR2013 1-216-296-11 SHORT CHIP 0 (SHAKE33/SHAKE44) (EXCEPT SHAKE33/SHAKE44) JR2015 1-216-296-11 SHORT CHIP 0 (SHAKE33/SHAKE44) C2050 1-114-326-11 CERAMIC CHIP 0.22uF (EXCEPT SHAKE33/SHAKE44)
  • Page 108 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R2013 1-216-827-11 METAL CHIP 3.3K 1/10W R2063 1-216-803-11 METAL CHIP 1/10W (SHAKE33/SHAKE44) (EXCEPT SHAKE33/SHAKE44) R2014 1-216-825-11 METAL CHIP 2.2K 1/10W R2064 1-216-806-11 METAL CHIP 1/10W...
  • Page 109 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark S2005 1-762-875-21 SWITCH, TACTILE C2212 1-126-176-11 ELECT 220uF +) (SHAKE33/SHAKE44) / (EXCEPT SHAKE33/SHAKE44) (TUNING+ M> ) (EXCEPT SHAKE33/ C2213 1-118-347-11 CERAMIC CHIP 0.1uF SHAKE44) (EXCEPT SHAKE33/SHAKE44)
  • Page 110 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C2238 1-118-290-11 CERAMIC CHIP 0.001uF JC013 1-216-295-91 SHORT CHIP (SHAKE44/SHAKE66/SHAKE88) (EXCEPT SHAKE33/SHAKE44) JC014 1-216-295-91 SHORT CHIP C2239 1-118-290-11 CERAMIC CHIP 0.001uF (EXCEPT SHAKE33/SHAKE44) (EXCEPT SHAKE33)
  • Page 111 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R2212 1-216-833-11 METAL CHIP 1/10W < CAPACITOR > (EXCEPT SHAKE33) R2213 1-216-833-11 METAL CHIP 1/10W * C003 1-116-714-11 CERAMIC CHIP 22uF 6.3V (EXCEPT SHAKE33)
  • Page 112 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * C112 1-118-035-11 CERAMIC CHIP 0.1uF C308 1-118-403-11 CERAMIC CHIP 0.001uF * C113 1-118-035-11 CERAMIC CHIP 0.1uF C309 1-118-403-11 CERAMIC CHIP 0.001uF * C114 1-118-035-11 CERAMIC CHIP 0.1uF...
  • Page 113 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * C409 1-118-035-11 CERAMIC CHIP 0.1uF C603 1-164-936-11 CERAMIC CHIP 680PF C411 1-100-904-11 CERAMIC CHIP 330PF C604 1-164-866-11 CERAMIC CHIP 47PF C412 1-165-492-21 ELECT CHIP...
  • Page 114 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C666 1-118-041-11 CERAMIC CHIP 4.7uF C756 1-124-779-00 ELECT CHIP 10uF (EXCEPT SHAKE33) * C757 1-118-035-11 CERAMIC CHIP 0.1uF C667 1-118-041-11 CERAMIC CHIP 4.7uF C758...
  • Page 115 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.4 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * D117 6-503-578-01 DI RB520SM-30T2R JC003 1-216-295-91 SHORT CHIP * D118 6-503-578-01 DI RB520SM-30T2R JC004 1-216-295-91 SHORT CHIP * D119 6-503-578-01 DI RB520SM-30T2R JC005...
  • Page 116 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R028 1-218-965-11 METAL CHIP 1/16W R143 1-218-969-11 METAL CHIP 1/16W R029 1-216-843-11 METAL CHIP 1/10W R144 1-218-967-11 METAL CHIP 1/16W R030 1-218-843-11 METAL CHIP 0.5%...
  • Page 117 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R212 1-218-937-11 METAL CHIP 1/16W R276 1-218-941-81 METAL CHIP 1/16W R213 1-218-941-81 METAL CHIP 1/16W R277 1-218-937-11 METAL CHIP 1/16W R214 1-218-937-11 METAL CHIP...
  • Page 118 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R348 1-218-961-11 METAL CHIP 4.7K 1/16W R422 1-218-973-11 METAL CHIP 1/16W R349 1-218-941-81 METAL CHIP 1/16W * R423 1-250-572-11 METAL CHIP 1/10W R350 1-218-990-81...
  • Page 119 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R562 1-218-937-11 METAL CHIP 1/16W R653 1-218-963-11 METAL CHIP 6.8K 1/16W (SHAKE77/SHAKE88) (SHAKE44/SHAKE66/SHAKE88) R569 1-216-864-11 SHORT CHIP R571 1-218-981-81 METAL CHIP 220K 1/16W R653...
  • Page 120 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 MOTHERBOARD MS-476 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R719 1-218-929-11 METAL CHIP 1/16W R816 1-218-990-81 SHORT CHIP (EXCEPT SHAKE33) R720 1-218-929-11 METAL CHIP 1/16W R817 1-218-929-11 METAL CHIP 1/16W (EXCEPT SHAKE33)
  • Page 121 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark STR BOARD C2121 1-127-715-11 CERAMIC CHIP 0.22uF ********** (EXCEPT SHAKE33/SHAKE44) C2121 1-118-345-11 CERAMIC CHIP 0.01uF < CAPACITOR > (SHAKE33/SHAKE44) C2100 1-118-345-11 CERAMIC CHIP 0.01uF C2122...
  • Page 122 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark RV2101 1-786-417-11 ENCODER, ROTARY (VOLUME / DJ CONTROL) R2104 1-216-823-11 METAL CHIP 1.5K 1/10W (SHAKE33/SHAKE44) (SHAKE33/SHAKE44) R2105 1-216-823-11 METAL CHIP 1.5K 1/10W < IC >...
  • Page 123 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 TUNER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R2130 1-216-801-11 METAL CHIP 1/10W < SWITCH > (SHAKE33/SHAKE44) R2131 1-216-801-11 METAL CHIP 1/10W S2100 1-762-875-21 SWITCH, TACTILE (+/1) (SHAKE33/SHAKE44) (EXCEPT SHAKE33/SHAKE44) S2101 1-762-875-21...
  • Page 124 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.4 TUNER VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < CONNECTOR > * 103 1-500-082-11 CLAMP, SLEEVE FERRITE (SHAKE33/SHAKE44/ SHAKE55: US/SHAKE66: RU, MY/ CN3000 1-844-161-11 PIN, CONNECTOR 3P (ANTENNA FM/AM) SHAKE77: AUS/SHAKE88: EA, MY, SAF)
  • Page 125 Add C2116, C2118, C2119 and C2120 in STR board for HCD-SHAKE55/SHAKE66/SHAKE77/ SHAKE88. Add C2104, C2105, C2106 and C2107 in STR board for HCD-SHAKE33/SHAKE44. Add C905 in MOTHERBOARD board. Add P/N and description of C1109, C1110, C1198, C1199, C1364 and C1365 in 6CH DAMP board for HCD-SHAKE55/SHAKE66.
  • Page 126 HCD-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. Date Description of Revision Change P/N of CN1001 and CN1003 in 4CH DAMP board (SHAKE33/SHAKE44). Change P/N of CN451 in MOTHERBOARD board. Change P/N of CN501 and CN502 in MOTHERBOARD board (Service code changed). Change P/N of CN901 in MOTHERBOARD board (SHAKE44/SHAKE66/SHAKE88).

This manual is also suitable for:

Hcd-shake44Hcd-shake55Hcd-shake66Hcd-shake77Hcd-shake88

Table of Contents