Security Features; Ethernet Ports; Power Source Options; Factory Reset Button - Cisco MERAKI CW9166D1-MR Manual
Hide thumbs
Also See for MERAKI CW9166D1-MR:
- Hardware installation manual (70 pages) ,
- Installation manual (62 pages)
Table of Contents
Advertisement
2.3 Security Features
The CW9166D1-MR features multiple options for physically securing the access point after installation:
1. Security screw – The accessory kit includes screws that can be used to secure the access
point to the mount plate. Engaging the security screw prevents accidental dislodging and
theft.
2. Kensington lock – The access point contains a hard point that allows it to be secured to any
nearby permanent structure using a standard Kensington lock.
2.4 Ethernet Ports
The CW9166D1-MR features an Ethernet RJ45 port that accepts 802.3af power (labeled "PoE"). This port
should be used for uplink to your WAN connection.
2.5 Power Source Options
The CW9166D1-MR access point can be powered using either the Meraki AC Adapter or 802.3af PoE
Injector (both sold separately) or a third-party 802.3af PoE switch.
2.6 Factory Reset Button
If the button is pressed and held for at least five seconds and then released, the CW9166D1-MR will reboot
and be restored to its original factory settings by deleting all configuration information stored on the unit.
6
Advertisement
Table of Contents
