Paging Code Memory; Setting Paging Codes - Kenwood TH-28A Instruction Manual

144 mhz fm transceiver , 430/440 mhz fm transceiver

Hide thumbs Also See for TH-28A:

Table of Contents

2 Paging Code Memory

There are 11 paging code memories.

Memory Code

Use

Stores your station ID code in memory.

Automatically stores the calling station's

(@)

code during reception. Can temporarily set

the code for the station to be called.

Stores group codes and local station codes

in memory.

3 Setting Paging Codes

First, you must program your Individual Code into

Memory A.

1 Press the F key then press the 1 key.

Press and hold the F key for longer than one

second, then press the 1 key to enter the code

setting mode.

Rotate the tuning control to select A (your individual

code channel).

Enter your individual code (000 to 999) using the

numeric keys.

5 Your station ID is set in memory A.

6 Select 1 to 9 with the tuning control.

7 Enter the next Paging Code Memory you wish to

program as described in step 4.

Press the M key to exit the code setting mode.

Table of Contents

Th-28e Th-48a Th-48e