Advertisement
Quick Links
Operating
Instructions
PD-202
PD-202
PD-102
alist
3
DIGITAL AUDIO
PD-702
®
Demo mode allows you to see variation of the display. To
enter the demo mode, press POWER and then Ke <<
within 1 second without inserting the disc.
/
@ Toexit the demo mode, press one of any buttons on the
front panel.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you
will know how to operate your model properly.
After you
have finished reading the instructions, put them away in a
safe place for future reference.
{n some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown
in the explanatory drawings.
However, the method
of
connecting and operating the unit is the same.
WARNING:
to PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMIPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed
warranty card and keep it in a secure area. This is for your
security.
{For Canadian model with the polarized plug]
CAUTION:
To PREVENT ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
[Pour le modéle canadien avec la fiche polarisée]
ATTENTION: pour PREVENIR LES CHOCS ELECTRIQUES
NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE
SORTIE DE COURANT, SAUF Si LES LAMES PEUVENT ETRE
INSEREES A FOND SANS. EN LAISSER AUCUNE PARTIE A
DECOUVERT.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with this switch.
U.S., Canadian, European, U.K., Australian and Singapore
models are not provided with this switch.
Mains voltages in Saudi Arabia are 127V and 220V only.
The line voltage selector switch
is located on the rear panel of this
player. Before your player is shipped from the factory, the switch is
set to the power requirements of the player
stination. Check that
itis set properly before plugging the power cord into the outlet. tf the
voltage is not properly set or if you move to an area where the voltage
requirements differ, adjust the selector switch as follows:
e@ Use a medium-sized {flat blade) screwdriver.
Insert the tip of the
screwdriver into the groove of the selector switch and turn it so
that the power voltage marking of your area points to the arrow.
(' Sy
(¥)
220
-24a0v
10-127
CAUTION:
Be sure to use the shielded cables wh
connecting this equipment to other devices
*This product complies with the Radio Interference require
ments of the EC (European Community} Directive 87/308/EEC."
The Art of Entertainment
Advertisement
